[Wed Jul 11 11:44:10 2012] Detection parameters:
  Position = (358.4, 447.9) = 15 56 8.73 -23 28 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18724.5 +/- 156.8
  Background counts = 18.5
  Rate = 0.4 +/- 0.004

[Wed Jul 11 11:44:11 2012] Off-axis axis estimate = 11.68'
[Wed Jul 11 14:00:33 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 14:00:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 14:00:33 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Wed Jul 11 14:00:33 2012] source mask rpix=2.8, npix_max = 44, mask sum = 33, frac = 0.748
[Wed Jul 11 14:00:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.27"
[Wed Jul 11 14:49:05 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 14:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 14:49:05 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 14:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 14:49:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 14:49:06 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 14:49:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 11 14:49:06 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 14:49:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 11 14:49:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112380101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 15:48:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.236643 pixels away
[Wed Jul 11 15:48:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 15:48:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 15:48:24 2012] Assessing source extent using major
[Wed Jul 11 15:48:24 2012] Source does appear to be extended
[Wed Jul 11 15:48:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:53:08 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:53:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 17:53:08 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Wed Jul 11 17:53:08 2012] source mask rpix=2.8, npix_max = 44, mask sum = 33, frac = 0.748
[Wed Jul 11 17:53:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.27"
[Wed Jul 11 18:34:36 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 18:34:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 18:34:36 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 18:34:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 18:34:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 18:34:36 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 18:34:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul 11 18:34:36 2012] fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 18:34:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul 11 18:34:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112380101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:22:30 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Wed Jul 11 19:22:30 2012] Spatial fit model total counts = 6079.030000, observed total counts = 5111.000000
[Wed Jul 11 19:22:30 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 19:22:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:22:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:22:30 2012] Assessing source extent using major
[Wed Jul 11 19:22:30 2012] Source does appear to be extended
[Wed Jul 11 19:22:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 21:23:20 2012] Counts = 18724.455078, rescaling region sizes by 3.000000
[Wed Jul 11 21:23:20 2012] XMMSAS src. selection expression = ellipse(31136.239532, 38921.770447, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed Jul 11 21:23:20 2012] Writing source region out to fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul 11 21:23:20 2012] Extracting stamp from image fullrun_mos1_xmm0112380101_pi300-10000_cl_sm2.00.img.gz, (246, 335) - (471, 560)
[Wed Jul 11 21:23:20 2012] XMMSAS bgd. selection expression = annulus(31136.239532, 38921.770447, 9787.500000, 19575.000000, X, Y) && !ellipse(25971.387320, 26558.355800, 384.810411, 384.810411, 0.000000, X, Y) && !ellipse(18463.168732, 37434.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11570.115295, 26509.232361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21377.113400, 26450.379000, 370.356811, 370.356811, 0.000000, X, Y) && !ellipse(27893.179280, 29834.810000, 730.853621, 730.853621, 0.000000, X, Y) && !ellipse(18824.129257, 26067.342560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.846540, 28146.053600, 376.679211, 376.679211, 0.000000, X, Y) && !ellipse(33710.733826, 35519.512360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.951600, 32910.557080, 336.371210, 336.371210, 0.000000, X, Y) && !ellipse(26927.980300, 23309.176200, 540.864816, 540.864816, 0.000000, X, Y) && !ellipse(33837.835388, 29224.159119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28955.297577, 38065.353577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21835.285200, 29887.184200, 276.372808, 276.372808, 0.000000, X, Y) && !ellipse(35624.465668, 27419.169312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30423.173004, 38922.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24382.115960, 24677.429800, 281.847208, 281.847208, 0.000000, X, Y) && !ellipse(35864.929016, 38419.083130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36454.283000, 20085.890000, 448.343213, 448.343213, 0.000000, X, Y) && !ellipse(21545.761292, 23186.734009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21071.413757, 34474.583099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37052.813400, 29537.417600, 531.929615, 531.929615, 0.000000, X, Y) && !ellipse(22934.126800, 20793.806000, 369.647211, 369.647211, 0.000000, X, Y) && !ellipse(18782.777176, 28940.163910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29488.907200, 19358.190800, 507.979215, 507.979215, 0.000000, X, Y) && !ellipse(29054.640600, 30450.212200, 293.600008, 293.600008, 0.000000, X, Y) && !ellipse(13993.865547, 30602.382585, 631.905975, 372.162657, 90.000000, X, Y) && !ellipse(32036.799000, 24211.810400, 495.748014, 275.215208, 315.237924, X, Y) && !ellipse(12446.260361, 28471.718506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14755.300000, 33418.827200, 813.120023, 813.120023, 0.000000, X, Y) && !ellipse(21831.818130, 39824.788391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39180.542877, 21747.457230, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 21:23:20 2012] Writing fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6.gif
[Wed Jul 11 21:23:27 2012] Mean detx,y = (9983.82, 6778.85) 
[Wed Jul 11 21:23:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 21:28:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 21:28:45 2012] Setting source spectrum file to fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 11 21:28:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul 11 21:40:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 11 21:40:23 2012] rmf not generated due to insufficient counts
[Wed Jul 11 23:12:56 2012] Updating aperture counts using extracted products
[Wed Jul 11 23:12:56 2012] Error reading totcts from fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 11 23:12:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 23:12:56 2012] Using photon index=1.80, rate=0.428, arf fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6.arf
[Wed Jul 11 23:12:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 23:12:56 2012] Updating source flux to 7.2e-12
[Wed Jul 11 23:12:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 11 23:13:46 2012] xmm0112380101/analysis//spectral/fullrun_mos1_xmm0112380101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete