[Mon May 13 05:12:53 2013] Detection parameters:
  Position = (341.9, 477.9) = 2 17 5.16 -4 27 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.2 +/- 10.7
  Background counts = 18.2
  Rate = 0.002 +/- 0.0004

[Mon May 13 05:12:54 2013] Off-axis axis estimate = 13.39'
[Mon May 13 05:13:20 2013] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Mon May 13 05:13:20 2013] Initial guess for spatial extent in simple fitting = 13.12"
[Mon May 13 05:13:20 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Mon May 13 05:13:20 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.12"
[Mon May 13 05:13:21 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_src18.ximg exists
[Mon May 13 05:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_src18.csv
[Mon May 13 05:13:21 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon May 13 05:13:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_src18.csv
[Mon May 13 05:13:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:13:22 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon May 13 05:13:22 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon May 13 05:13:22 2013] Fit fullrun_pn_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon May 13 05:13:36 2013] Spatial fit model total counts = 276.785000, observed total counts = 275.000000
[Mon May 13 05:13:36 2013] Offset between fit and detection position for source 20 = 0.521758 pixels
[Mon May 13 05:13:36 2013] 274.452200 total counts/ 238.847000 bgd. counts: snr = 2.303846
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.521758 pixels
  Position = (341.4, 478.0) = 2 17 5.32 -4 27 6.3
  Extent = 5.1 (3.5-7.0)", rotation angle = 0
  Source counts = 35.6 +/- 16.6
  Background counts = 238.8
  Rate = 0.001 +/- 0.0006
[Mon May 13 05:13:36 2013] Vigneting correction estimate = 1.000000
[Mon May 13 05:13:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 05:13:36 2013] Assessing source extent using major axis lower bound
[Mon May 13 05:13:36 2013] Source does appear to be extended
[Mon May 13 05:13:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:14:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 05:14:01 2013] Initial guess for spatial extent in simple fitting = 5.13"
[Mon May 13 05:14:01 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.064
[Mon May 13 05:14:01 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 5.13"
[Mon May 13 05:14:02 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_src17.ximg exists
[Mon May 13 05:14:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_src17.csv
[Mon May 13 05:14:02 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon May 13 05:14:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_src17.csv
[Mon May 13 05:14:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:14:03 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon May 13 05:14:03 2013] fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon May 13 05:14:03 2013] Fit fullrun_pn_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon May 13 05:14:15 2013] Spatial fit model total counts = 219.906000, observed total counts = 220.000000
[Mon May 13 05:14:15 2013] Offset between fit and detection position for source 20 = 0.012479 pixels
[Mon May 13 05:14:15 2013] 218.485000 total counts/ 183.210000 bgd. counts: snr = 2.606108
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.012479 pixels
  Position = (341.4, 478.0) = 2 17 5.32 -4 27 6.3
  Extent = 5.2 (3.6-6.6)", rotation angle = 0
  Source counts = 35.3 +/- 14.8
  Background counts = 183.2
  Rate = 0.001 +/- 0.0006
[Mon May 13 05:14:15 2013] Vigneting correction estimate = 1.000000
[Mon May 13 05:14:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 05:14:15 2013] Assessing source extent using major axis lower bound
[Mon May 13 05:14:15 2013] Source does appear to be extended
[Mon May 13 05:14:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:14:39 2013] XMMSAS src. selection expression = ellipse(29648.971400, 41536.163600, 309.801009, 309.801009, 0.000000, X, Y)
[Mon May 13 05:14:39 2013] Not overwriting source region fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src.reg
[Mon May 13 05:14:39 2013] Extracting stamp from image fullrun_pn_xmm0112372001_pi300-10000_cl_sm2.00.img.gz, (324, 460) - (359, 496)
[Mon May 13 05:14:39 2013] XMMSAS bgd. selection expression = annulus(29648.971400, 41536.163600, 516.335015, 1032.670030, X, Y) && !ellipse(28315.440826, 42667.560120, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 05:14:39 2013] Writing fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20.gif
[Mon May 13 05:14:42 2013] ../../xmm0112372001/products/events/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0112372001/products/events/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Mon May 13 05:14:42 2013] Mean detx,y = (-4005.74, -14291.16) 
[Mon May 13 05:14:42 2013] ../../xmm0112372001/products/images/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src.img and ../../xmm0112372001/products/images/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Mon May 13 05:14:42 2013] ../../xmm0112372001/products/spectra/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0112372001/products/spectra/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Mon May 13 05:14:42 2013] Setting source spectrum file to fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon May 13 05:14:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon May 13 05:14:42 2013] ../../xmm0112372001/products/lightcurves/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0112372001/products/lightcurves/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Mon May 13 05:31:17 2013] Not generating rmf since there are only 35 counts
[Mon May 13 05:31:17 2013] rmf not generated due to insufficient counts
[Mon May 13 05:45:17 2013] Updating aperture counts using extracted products
[Mon May 13 05:45:17 2013] Total counts from fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 61.00
[Mon May 13 05:45:18 2013] Total counts from fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_bgd.pi.gz = 233.00
[Mon May 13 05:45:18 2013] Got source and background scale factors 300800.000000, 2373847.000000
[Mon May 13 05:45:18 2013] User source parameters:
  Position = (341.4, 478.0) = 2 17 5.32 -4 27 6.3
  Extent = 5.2 (3.6-6.6)", rotation angle = 0
  Source aperture counts = 31.5 +/- 8.9
  Background aperture counts = 29.5
  Rate = 0.001 +/- 0.0003

[Mon May 13 05:45:23 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:45:23 2013] Using photon index=1.80, rate=0.00136, arf fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20.arf
[Mon May 13 05:45:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:45:23 2013] Updating source flux to 1.3e-14
[Mon May 13 05:45:39 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:45:44 2013] xmm0112372001/analysis//spectral/fullrun_pn_xmm0112372001_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete