[Mon May 13 05:12:56 2013] Detection parameters:
  Position = (370.9, 192.7) = 2 16 56.70 -4 47 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 10.7
  Background counts = 6.2
  Rate = 0.005 +/- 0.0007

[Mon May 13 05:12:58 2013] Off-axis axis estimate = 9.30'
[Mon May 13 05:13:25 2013] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Mon May 13 05:13:25 2013] Initial guess for spatial extent in simple fitting = 11.08"
[Mon May 13 05:13:25 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Mon May 13 05:13:25 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.08"
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 13 05:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src5.csv
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 13 05:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src5.csv
[Mon May 13 05:13:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 13 05:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 13 05:13:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 13 05:13:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:13:48 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.023771 pixels away
[Mon May 13 05:13:48 2013] Vigneting correction estimate = 1.000000
[Mon May 13 05:13:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 05:13:48 2013] Assessing source extent using major
[Mon May 13 05:13:48 2013] Source does appear to be extended
[Mon May 13 05:13:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:14:05 2013] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Mon May 13 05:14:05 2013] Initial guess for spatial extent in simple fitting = 11.08"
[Mon May 13 05:14:05 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Mon May 13 05:14:05 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.08"
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 13 05:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src5.csv
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 13 05:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src5.csv
[Mon May 13 05:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 13 05:14:06 2013] Fit fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon May 13 05:14:26 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 64.112612 pixels away
[Mon May 13 05:14:26 2013] Spatial fit model total counts = 124.891000, observed total counts = 118.000000
[Mon May 13 05:14:26 2013] Offset between fit and detection position for source 7 = 0.134232 pixels
[Mon May 13 05:14:26 2013] 125.349600 total counts/ 75.160000 bgd. counts: snr = 5.789224
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.134232 pixels
  Position = (370.8, 192.6) = 2 16 56.73 -4 47 47.7
  Extent = 4.8 (3.3-6.4)", rotation angle = 0
  Source counts = 50.2 +/- 11.2
  Background counts = 75.2
  Rate = 0.002 +/- 0.0004
[Mon May 13 05:14:26 2013] Vigneting correction estimate = 1.000000
[Mon May 13 05:14:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 05:14:26 2013] Assessing source extent using major axis lower bound
[Mon May 13 05:14:26 2013] Source does appear to be extended
[Mon May 13 05:14:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:44:42 2013] XMMSAS src. selection expression = ellipse(32214.596660, 16707.005800, 289.110008, 289.110008, 0.000000, X, Y)
[Mon May 13 05:44:42 2013] Not overwriting source region fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src.reg
[Mon May 13 05:44:42 2013] Extracting stamp from image fullrun_mos2_xmm0112372001_pi300-10000_cl_sm2.00.img.gz, (354, 176) - (387, 209)
[Mon May 13 05:44:42 2013] XMMSAS bgd. selection expression = annulus(32214.596660, 16707.005800, 481.850014, 963.700028, X, Y)
[Mon May 13 05:44:42 2013] Writing fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7.gif
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/events/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0112372001/products/events/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Mon May 13 05:44:43 2013] Mean detx,y = (-8362.60, -7374.71) 
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/images/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src.img and ../../xmm0112372001/products/images/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/spectra/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0112372001/products/spectra/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Mon May 13 05:44:43 2013] Setting source spectrum file to fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 13 05:44:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/lightcurves/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0112372001/products/lightcurves/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Mon May 13 05:44:47 2013] Not generating rmf since there are only 50 counts
[Mon May 13 05:44:47 2013] rmf not generated due to insufficient counts
[Mon May 13 05:44:47 2013] fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Mon May 13 05:45:29 2013] Updating aperture counts using extracted products
[Mon May 13 05:45:29 2013] Total counts from fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 62.00
[Mon May 13 05:45:29 2013] Total counts from fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_bgd.pi.gz = 65.00
[Mon May 13 05:45:29 2013] Got source and background scale factors 260800.000000, 1869332.000000
[Mon May 13 05:45:29 2013] User source parameters:
  Position = (370.8, 192.6) = 2 16 56.73 -4 47 47.7
  Extent = 4.8 (3.3-6.4)", rotation angle = 0
  Source aperture counts = 52.9 +/- 8.9
  Background aperture counts = 9.1
  Rate = 0.002 +/- 0.0003

[Mon May 13 05:45:33 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:45:33 2013] Using photon index=1.80, rate=0.00182, arf fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7.arf
[Mon May 13 05:45:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:45:33 2013] Updating source flux to 4.7e-14
[Mon May 13 05:45:37 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:45:39 2013] xmm0112372001/analysis//spectral/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete