[Mon May 13 05:12:56 2013] Detection parameters:
  Position = (318.3, 212.1) = 2 17 12.01 -4 46 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.5 +/- 13.8
  Background counts = 6.0
  Rate = 0.007 +/- 0.0008

[Mon May 13 05:12:58 2013] Off-axis axis estimate = 6.42'
[Mon May 13 05:13:25 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Mon May 13 05:13:25 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Mon May 13 05:13:25 2013] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.712
[Mon May 13 05:13:25 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.64"
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 13 05:13:26 2013] Fit fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_src4 appears to have run properly
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 13 05:13:26 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 13 05:13:26 2013] Fit fullrun_mos2_xmm0112372001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon May 13 05:13:48 2013] Spatial fit model total counts = 168.321000, observed total counts = 185.000000
[Mon May 13 05:13:48 2013] Offset between fit and detection position for source 3 = 0.966353 pixels
[Mon May 13 05:13:48 2013] 166.217200 total counts/ 109.261000 bgd. counts: snr = 5.448895
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.966353 pixels
  Position = (319.3, 212.1) = 2 17 11.73 -4 46 23.0
  Extent = 6.9 (5.7-9.8)", rotation angle = 0
  Source counts = 57.0 +/- 12.9
  Background counts = 109.3
  Rate = 0.002 +/- 0.0005
[Mon May 13 05:13:48 2013] Vigneting correction estimate = 1.000000
[Mon May 13 05:13:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 05:13:48 2013] Assessing source extent using major axis lower bound
[Mon May 13 05:13:48 2013] Source does appear to be extended
[Mon May 13 05:13:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:14:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 05:14:05 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Mon May 13 05:14:05 2013] source mask rpix=1.6, npix_max = 17, mask sum = 10, frac = 0.572
[Mon May 13 05:14:05 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 6.92"
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 13 05:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src4.csv
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 13 05:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src4.csv
[Mon May 13 05:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 13 05:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 13 05:14:06 2013] fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 13 05:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 13 05:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112372001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:14:26 2013] Warning, spatial fit 4 centroid is now closest to src. 7
[Mon May 13 05:14:26 2013] Vigneting correction estimate = 1.000000
[Mon May 13 05:14:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 05:14:26 2013] Assessing source extent using major axis lower bound
[Mon May 13 05:14:26 2013] Source does appear to be extended
[Mon May 13 05:14:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 05:44:42 2013] XMMSAS src. selection expression = ellipse(27730.754600, 18402.362000, 414.926412, 414.926412, 0.000000, X, Y)
[Mon May 13 05:44:42 2013] Not overwriting source region fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src.reg
[Mon May 13 05:44:42 2013] Extracting stamp from image fullrun_mos2_xmm0112372001_pi300-10000_cl_sm2.00.img.gz, (295, 188) - (343, 236)
[Mon May 13 05:44:42 2013] XMMSAS bgd. selection expression = annulus(27730.754600, 18402.362000, 691.544020, 1383.088040, X, Y) && !ellipse(26795.614200, 17366.310200, 367.264811, 367.264811, 0.000000, X, Y)
[Mon May 13 05:44:42 2013] Writing fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3.gif
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/events/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112372001/products/events/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 13 05:44:43 2013] Mean detx,y = (-3534.26, -7707.71) 
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/images/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112372001/products/images/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/spectra/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112372001/products/spectra/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 13 05:44:43 2013] Setting source spectrum file to fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 13 05:44:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 13 05:44:43 2013] ../../xmm0112372001/products/lightcurves/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112372001/products/lightcurves/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 13 05:44:47 2013] Not generating rmf since there are only 56 counts
[Mon May 13 05:44:47 2013] rmf not generated due to insufficient counts
[Mon May 13 05:44:47 2013] fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Mon May 13 05:45:29 2013] Updating aperture counts using extracted products
[Mon May 13 05:45:29 2013] Total counts from fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 99.00
[Mon May 13 05:45:29 2013] Total counts from fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 134.00
[Mon May 13 05:45:29 2013] Got source and background scale factors 486108.000000, 3595124.000000
[Mon May 13 05:45:29 2013] User source parameters:
  Position = (319.3, 212.1) = 2 17 11.73 -4 46 23.0
  Extent = 6.9 (5.7-9.8)", rotation angle = 0
  Source aperture counts = 80.9 +/- 11.0
  Background aperture counts = 18.1
  Rate = 0.003 +/- 0.0004

[Mon May 13 05:45:33 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:45:33 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3.arf
[Mon May 13 05:45:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:45:33 2013] Updating source flux to 3.8e-14
[Mon May 13 05:45:37 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:45:39 2013] xmm0112372001/analysis//spectral/fullrun_mos2_xmm0112372001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete