[Sat Jun 15 15:47:02 2013] Detection parameters:
  Position = (415.6, 402.2) = 2 16 32.98 -4 30 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 9.6
  Background counts = 6.5
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 15:47:03 2013] Off-axis axis estimate = 11.34'
[Sat Jun 15 16:43:41 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 16:43:41 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Sat Jun 15 16:43:41 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.975
[Sat Jun 15 16:43:41 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 12.10"
[Sat Jun 15 17:25:40 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 15 17:25:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_src19.csv
[Sat Jun 15 17:25:40 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 15 17:25:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_src19.csv
[Sat Jun 15 17:25:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 17:25:40 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 15 17:25:40 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 15 17:25:40 2013] Fit fullrun_mos1_xmm0112371701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun 15 17:57:13 2013] Spatial fit model total counts = 107.495000, observed total counts = 98.000000
[Sat Jun 15 17:57:13 2013] Offset between fit and detection position for source 11 = 0.590459 pixels
[Sat Jun 15 17:57:13 2013] 107.900800 total counts/ 52.279100 bgd. counts: snr = 7.692725
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.590459 pixels
  Position = (415.5, 402.8) = 2 16 33.01 -4 30 28.2
  Extent = 9.8 (6.7-13.0)", rotation angle = 0
  Source counts = 55.6 +/- 10.4
  Background counts = 52.3
  Rate = 0.002 +/- 0.0004
[Sat Jun 15 17:57:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 17:57:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 17:57:13 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 17:57:13 2013] Source does appear to be extended
[Sat Jun 15 17:57:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 18:52:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 18:52:18 2013] Initial guess for spatial extent in simple fitting = 9.82"
[Sat Jun 15 18:52:18 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.987
[Sat Jun 15 18:52:18 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.82"
[Sat Jun 15 19:29:35 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun 15 19:29:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_src18.csv
[Sat Jun 15 19:29:35 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun 15 19:29:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_src18.csv
[Sat Jun 15 19:29:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 19:29:35 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 15 19:29:35 2013] fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 15 19:29:35 2013] Fit fullrun_mos1_xmm0112371701_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun 15 19:59:35 2013] Spatial fit model total counts = 101.675000, observed total counts = 95.000000
[Sat Jun 15 19:59:35 2013] Offset between fit and detection position for source 11 = 0.114505 pixels
[Sat Jun 15 19:59:35 2013] 100.965000 total counts/ 44.541700 bgd. counts: snr = 8.454250
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.114505 pixels
  Position = (415.5, 402.9) = 2 16 33.01 -4 30 27.7
  Extent = 9.9 (6.6-13.1)", rotation angle = 0
  Source counts = 56.4 +/- 10.0
  Background counts = 44.5
  Rate = 0.002 +/- 0.0004
[Sat Jun 15 19:59:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 19:59:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 19:59:35 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 19:59:35 2013] Source does appear to be extended
[Sat Jun 15 19:59:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:43 2013] XMMSAS src. selection expression = ellipse(36099.496000, 35001.251720, 596.528889, 596.528889, 0.000000, X, Y)
[Sat Jun 15 20:10:43 2013] Writing source region out to fullrun_mos1_xmm0112371701_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 15 20:10:43 2013] Extracting stamp from image fullrun_mos1_xmm0112371701_pi300-10000_cl_sm2.00.img.gz, (381, 369) - (450, 437)
[Sat Jun 15 20:10:43 2013] XMMSAS bgd. selection expression = annulus(36099.496000, 35001.251720, 994.214816, 1988.429631, X, Y) && !ellipse(36632.022780, 33022.920400, 589.460817, 255.358407, 52.277380, X, Y)
[Sat Jun 15 20:10:43 2013] Writing fullrun_mos1_xmm0112371701_pi300-10000_pass1_cl_src11.gif
[Sat Jun 15 20:15:45 2013] Mean detx,y = (-12663.09, -9045.45) 
[Sat Jun 15 20:15:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 20:16:02 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 20:16:03 2013] Setting source spectrum file to fullrun_mos1_xmm0112371701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 15 20:16:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112371701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 15 20:29:31 2013] Not generating rmf since there are only 56 counts
[Sat Jun 15 20:29:31 2013] rmf not generated due to insufficient counts