[Sat Jun 30 10:19:57 2012] Detection parameters:
  Position = (416.4, 399.2) = 2 18 8.37 -5 12 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.2 +/- 15.0
  Background counts = 34.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 30 10:19:57 2012] Off-axis axis estimate = 11.24'
[Sat Jun 30 10:49:42 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 10:49:42 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Sat Jun 30 10:49:42 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Sat Jun 30 10:49:42 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.05"
[Sat Jun 30 11:00:56 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jun 30 11:00:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_src12.csv
[Sat Jun 30 11:00:56 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jun 30 11:00:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_src12.csv
[Sat Jun 30 11:00:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 11:00:56 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jun 30 11:00:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 30 11:00:56 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jun 30 11:00:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 30 11:00:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370801_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 11:13:46 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.819666 pixels away
[Sat Jun 30 11:13:46 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 11:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 11:13:46 2012] Assessing source extent using major
[Sat Jun 30 11:13:46 2012] Source does appear to be extended
[Sat Jun 30 11:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 11:42:49 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 11:42:49 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Sat Jun 30 11:42:49 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Sat Jun 30 11:42:49 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.05"
[Sat Jun 30 11:54:43 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jun 30 11:54:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_src12.csv
[Sat Jun 30 11:54:43 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jun 30 11:54:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_src12.csv
[Sat Jun 30 11:54:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 11:54:43 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jun 30 11:54:43 2012] fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jun 30 11:54:43 2012] Fit fullrun_mos1_xmm0112370801_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jun 30 12:08:10 2012] Spatial fit model total counts = 184.207000, observed total counts = 170.000000
[Sat Jun 30 12:08:10 2012] Offset between fit and detection position for source 5 = 0.260124 pixels
[Sat Jun 30 12:08:10 2012] 186.043200 total counts/ 129.209000 bgd. counts: snr = 4.999924
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.260124 pixels
  Position = (416.5, 399.0) = 2 18 8.32 -5 12 25.5
  Extent = 7.2 (5.3-10.0)", rotation angle = 0
  Source counts = 56.8 +/- 13.6
  Background counts = 129.2
  Rate = 0.001 +/- 0.0003
[Sat Jun 30 12:08:10 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 12:08:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 12:08:10 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 12:08:10 2012] Source does appear to be extended
[Sat Jun 30 12:08:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 12:37:59 2012] XMMSAS src. selection expression = ellipse(36188.815644, 34660.427400, 434.672413, 434.672413, 0.000000, X, Y)
[Sat Jun 30 12:37:59 2012] Writing source region out to fullrun_mos1_xmm0112370801_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 30 12:37:59 2012] Extracting stamp from image fullrun_mos1_xmm0112370801_pi300-10000_cl_sm2.00.img.gz, (392, 374) - (442, 424)
[Sat Jun 30 12:37:59 2012] XMMSAS bgd. selection expression = annulus(36188.815644, 34660.427400, 724.454021, 1448.908042, X, Y)
[Sat Jun 30 12:37:59 2012] Writing fullrun_mos1_xmm0112370801_pi300-10000_pass1_cl_src5.gif
[Sat Jun 30 12:40:18 2012] Mean detx,y = (-12530.19, -9000.57) 
[Sat Jun 30 12:40:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 30 12:40:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 30 12:40:26 2012] Setting source spectrum file to fullrun_mos1_xmm0112370801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 30 12:40:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112370801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 30 12:47:28 2012] Not generating rmf since there are only 56 counts
[Sat Jun 30 12:47:28 2012] rmf not generated due to insufficient counts
[Sat Jun 30 12:59:09 2012] Updating aperture counts using extracted products
[Sat Jun 30 12:59:09 2012] Error reading totcts from fullrun_mos1_xmm0112370801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 30 12:59:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 12:59:09 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos1_xmm0112370801_pi300-10000_pass1_cl_src5.arf
[Sat Jun 30 12:59:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 30 12:59:09 2012] Updating source flux to 3.9e-14
[Sat Jun 30 12:59:11 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting