[Thu Jun 14 12:43:56 2012] Detection parameters:
  Position = (353.1, 408.7) = 2 16 50.68 -5 11 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.9 +/- 9.4
  Background counts = 11.4
  Rate = 0.0009 +/- 0.0002

[Thu Jun 14 12:43:56 2012] Off-axis axis estimate = 8.93'
[Thu Jun 14 15:23:02 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:23:02 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Thu Jun 14 15:23:02 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Thu Jun 14 15:23:02 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.89"
[Thu Jun 14 16:17:46 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_src35.ximg exists
[Thu Jun 14 16:17:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_src35.csv
[Thu Jun 14 16:17:46 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Jun 14 16:17:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_src35.csv
[Thu Jun 14 16:17:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 16:17:47 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Jun 14 16:17:47 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Jun 14 16:17:47 2012] Fit fullrun_mos2_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu Jun 14 16:18:16 2012] Source 9 is offset by -3.879473 and -2.122337 pixels which is larger than
2 X fitted extent = 1.250538 x 1.250538, not incorporating fit results
[Thu Jun 14 16:18:16 2012] Spatial fit model total counts = 154.779000, observed total counts = 155.000000
[Thu Jun 14 16:18:16 2012] Offset between fit and detection position for source 9 = 0.109080 pixels
[Thu Jun 14 16:18:16 2012] 153.565100 total counts/ 123.838000 bgd. counts: snr = 2.671318
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.109080 pixels
  Position = (353.0, 408.7) = 2 16 50.71 -5 11 40.7
  Extent = 4.7 (2.8-6.5)", rotation angle = 0
  Source counts = 29.7 +/- 12.4
  Background counts = 123.8
  Rate = 0.0006 +/- 0.0003
[Thu Jun 14 16:18:16 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 16:18:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 16:18:16 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 16:18:16 2012] Source does appear to be extended
[Thu Jun 14 16:18:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 18:45:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 18:45:26 2012] Initial guess for spatial extent in simple fitting = 4.68"
[Thu Jun 14 18:45:26 2012] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.207
[Thu Jun 14 18:45:26 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 4.68"
[Thu Jun 14 19:28:17 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jun 14 19:28:17 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jun 14 19:28:17 2012] Fit fullrun_mos2_xmm0112370701_pi300-10000_cl_pass1_src32 appears to have run properly
[Thu Jun 14 19:28:17 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jun 14 19:28:17 2012] fullrun_mos2_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jun 14 19:28:17 2012] Fit fullrun_mos2_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu Jun 14 19:28:44 2012] Spatial fit model total counts = 148.072000, observed total counts = 148.000000
[Thu Jun 14 19:28:44 2012] Offset between fit and detection position for source 9 = 0.013102 pixels
[Thu Jun 14 19:28:44 2012] 146.926000 total counts/ 117.190000 bgd. counts: snr = 2.746865
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.013102 pixels
  Position = (353.0, 408.8) = 2 16 50.71 -5 11 40.6
  Extent = 4.7 (2.8-6.6)", rotation angle = 0
  Source counts = 29.7 +/- 12.1
  Background counts = 117.2
  Rate = 0.0006 +/- 0.0002
[Thu Jun 14 19:28:44 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 19:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 19:28:44 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 19:28:44 2012] Source does appear to be extended
[Thu Jun 14 19:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 21:19:35 2012] XMMSAS src. selection expression = ellipse(30662.850720, 35513.069800, 283.114208, 283.114208, 0.000000, X, Y)
[Thu Jun 14 21:19:35 2012] Writing source region out to fullrun_mos2_xmm0112370701_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 14 21:19:35 2012] Extracting stamp from image fullrun_mos2_xmm0112370701_pi300-10000_cl_sm2.00.img.gz, (337, 392) - (369, 425)
[Thu Jun 14 21:19:35 2012] XMMSAS bgd. selection expression = annulus(30662.850720, 35513.069800, 471.857014, 943.714027, X, Y) && !ellipse(31884.257960, 34751.994000, 464.126413, 464.126413, 0.000000, X, Y) && !ellipse(30033.101410, 36333.562927, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 21:19:35 2012] Writing fullrun_mos2_xmm0112370701_pi300-10000_pass1_cl_src9.gif
[Thu Jun 14 21:26:18 2012] Mean detx,y = (3216.02, -12150.13) 
[Thu Jun 14 21:26:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 21:26:23 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 21:26:23 2012] Setting source spectrum file to fullrun_mos2_xmm0112370701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 14 21:26:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112370701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 14 21:36:19 2012] Not generating rmf since there are only 29 counts
[Thu Jun 14 21:36:19 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:37:59 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:37:59 2012] Error reading totcts from fullrun_mos2_xmm0112370701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 14 21:38:00 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:38:00 2012] Using photon index=1.80, rate=0.000605, arf fullrun_mos2_xmm0112370701_pi300-10000_pass1_cl_src9.arf
[Thu Jun 14 21:38:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:38:00 2012] Updating source flux to 1.7e-14
[Thu Jun 14 21:38:26 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Thu Jun 14 21:38:26 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting