[Thu Jun 14 12:43:27 2012] Detection parameters:
  Position = (212.9, 109.3) = 2 17 31.53 -5 33 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 11.4
  Background counts = 10.2
  Rate = 0.001 +/- 0.0002

[Thu Jun 14 12:43:27 2012] Off-axis axis estimate = 15.05'
[Thu Jun 14 14:21:15 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:21:15 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Thu Jun 14 14:21:15 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.018
[Thu Jun 14 14:21:15 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.95"
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 14 15:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src29.csv
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 14 15:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src29.csv
[Thu Jun 14 15:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 14 15:23:01 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Jun 14 16:18:09 2012] Spatial fit model total counts = 466.552000, observed total counts = 262.000000
[Thu Jun 14 16:18:09 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 16:18:09 2012] Warning, spatial fit 29 centroid is now closest to src. 49
[Thu Jun 14 16:18:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 16:18:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 16:18:09 2012] Assessing source extent using major
[Thu Jun 14 16:18:09 2012] Source does appear to be extended
[Thu Jun 14 16:18:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 17:52:00 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:52:00 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Thu Jun 14 17:52:00 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.018
[Thu Jun 14 17:52:00 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 13.95"
[Thu Jun 14 18:45:25 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jun 14 18:45:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src29.csv
[Thu Jun 14 18:45:25 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jun 14 18:45:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src29.csv
[Thu Jun 14 18:45:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:45:26 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun 14 18:45:26 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun 14 18:45:26 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Jun 14 19:28:38 2012] Spatial fit model total counts = 244.403000, observed total counts = 231.000000
[Thu Jun 14 19:28:38 2012] Offset between fit and detection position for source 32 = 0.201265 pixels
[Thu Jun 14 19:28:38 2012] 201.239800 total counts/ 156.184000 bgd. counts: snr = 3.605226
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.201265 pixels
  Position = (213.0, 109.5) = 2 17 31.49 -5 33 22.5
  Extent = 5.1 (3.6-6.8)", rotation angle = 0
  Source counts = 45.1 +/- 14.2
  Background counts = 156.2
  Rate = 0.0009 +/- 0.0003
[Thu Jun 14 19:28:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 19:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 19:28:38 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 19:28:38 2012] Source does appear to be extended
[Thu Jun 14 19:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:53:49 2012] XMMSAS src. selection expression = ellipse(18483.423000, 9474.005700, 303.694809, 303.694809, 0.000000, X, Y)
[Thu Jun 14 20:53:49 2012] Writing source region out to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src32_src.reg
[Thu Jun 14 20:53:49 2012] Extracting stamp from image fullrun_mos1_xmm0112370701_pi300-10000_cl_sm2.00.img.gz, (196, 92) - (230, 127)
[Thu Jun 14 20:53:49 2012] XMMSAS bgd. selection expression = annulus(18483.423000, 9474.005700, 506.158015, 1012.316029, X, Y) && !ellipse(19237.699188, 8726.888893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19340.799286, 10520.574249, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:53:49 2012] Writing fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src32.gif
[Thu Jun 14 21:00:44 2012] Mean detx,y = (16392.82, 1519.39) 
[Thu Jun 14 21:00:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 21:00:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 21:00:53 2012] Setting source spectrum file to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jun 14 21:00:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Jun 14 21:18:14 2012] Not generating rmf since there are only 45 counts
[Thu Jun 14 21:18:14 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:37:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:37:58 2012] Error reading totcts from fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jun 14 21:37:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:37:59 2012] Using photon index=1.80, rate=0.000916, arf fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src32.arf
[Thu Jun 14 21:37:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:37:59 2012] Updating source flux to 2.7e-14
[Thu Jun 14 21:38:02 2012] Flag p found in src. 32 procflags, skipping spectral fitting
[Thu Jun 14 21:38:02 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting