[Thu Jun 14 12:43:27 2012] Detection parameters:
  Position = (451.4, 287.6) = 2 16 22.04 -5 20 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 9.2
  Background counts = 10.3
  Rate = 0.0009 +/- 0.0002

[Thu Jun 14 12:43:27 2012] Off-axis axis estimate = 11.12'
[Thu Jun 14 14:21:15 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:21:15 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Thu Jun 14 14:21:15 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.156
[Thu Jun 14 14:21:15 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.99"
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src45.ximg exists
[Thu Jun 14 15:23:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src45.csv
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Jun 14 15:23:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src45.csv
[Thu Jun 14 15:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Jun 14 15:23:01 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu Jun 14 16:18:09 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.307073 pixels away
[Thu Jun 14 16:18:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 16:18:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 16:18:09 2012] Assessing source extent using major
[Thu Jun 14 16:18:09 2012] Source does appear to be extended
[Thu Jun 14 16:18:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 17:52:00 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:52:00 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Thu Jun 14 17:52:00 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.156
[Thu Jun 14 17:52:00 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 11.99"
[Thu Jun 14 18:45:25 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src43.ximg exists
[Thu Jun 14 18:45:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src43.csv
[Thu Jun 14 18:45:25 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu Jun 14 18:45:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src43.csv
[Thu Jun 14 18:45:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 18:45:26 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu Jun 14 18:45:26 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Jun 14 18:45:26 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Thu Jun 14 19:28:38 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 75.353941 pixels away
[Thu Jun 14 19:28:38 2012] Spatial fit model total counts = 147.995000, observed total counts = 148.000000
[Thu Jun 14 19:28:38 2012] Offset between fit and detection position for source 30 = 0.296172 pixels
[Thu Jun 14 19:28:38 2012] 144.913400 total counts/ 118.984000 bgd. counts: snr = 2.377104
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.296172 pixels
  Position = (451.2, 287.4) = 2 16 22.11 -5 20 28.5
  Extent = 5.0 (3.6-7.3)", rotation angle = 0
  Source counts = 25.9 +/- 12.0
  Background counts = 119.0
  Rate = 0.0005 +/- 0.0002
[Thu Jun 14 19:28:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 19:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 19:28:38 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 19:28:38 2012] Source does appear to be extended
[Thu Jun 14 19:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:53:49 2012] XMMSAS src. selection expression = ellipse(39204.540600, 24953.654600, 299.195409, 299.195409, 0.000000, X, Y)
[Thu Jun 14 20:53:49 2012] Writing source region out to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src30_src.reg
[Thu Jun 14 20:53:49 2012] Extracting stamp from image fullrun_mos1_xmm0112370701_pi300-10000_cl_sm2.00.img.gz, (434, 270) - (468, 305)
[Thu Jun 14 20:53:49 2012] XMMSAS bgd. selection expression = annulus(39204.540600, 24953.654600, 498.659014, 997.318029, X, Y)
[Thu Jun 14 20:53:49 2012] Writing fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src30.gif
[Thu Jun 14 21:03:21 2012] Mean detx,y = (-3935.09, -14447.72) 
[Thu Jun 14 21:03:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 21:03:26 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 21:03:26 2012] Setting source spectrum file to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Jun 14 21:03:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Jun 14 21:19:15 2012] Not generating rmf since there are only 25 counts
[Thu Jun 14 21:19:15 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:37:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:37:58 2012] Error reading totcts from fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Jun 14 21:37:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:37:59 2012] Using photon index=1.80, rate=0.000527, arf fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src30.arf
[Thu Jun 14 21:37:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:37:59 2012] Updating source flux to 1.8e-14
[Thu Jun 14 21:38:02 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting