[Thu Jun 14 12:43:26 2012] Detection parameters:
  Position = (257.4, 164.9) = 2 17 18.55 -5 29 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 983.0 +/- 37.5
  Background counts = 11.2
  Rate = 0.04 +/- 0.001

[Thu Jun 14 12:43:27 2012] Off-axis axis estimate = 10.13'
[Thu Jun 14 14:21:15 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:21:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 14:21:15 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Thu Jun 14 14:21:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.063
[Thu Jun 14 14:21:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.49"
[Thu Jun 14 15:23:00 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 15:23:00 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 15:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 15:23:01 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 15:23:01 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 14 16:18:09 2012] Spatial fit model total counts = 1283.490000, observed total counts = 1280.000000
[Thu Jun 14 16:18:09 2012] Offset between fit and detection position for source 2 = 0.111542 pixels
[Thu Jun 14 16:18:09 2012] 1284.446000 total counts/ 527.859000 bgd. counts: snr = 32.930620
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.111542 pixels
  Position = (257.4, 164.8) = 2 17 18.55 -5 29 22.0
  Extent = 7.0 (6.5-7.3)", rotation angle = 0
  Source counts = 756.6 +/- 35.8
  Background counts = 527.9
  Rate = 0.02 +/- 0.0007
[Thu Jun 14 16:18:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 16:18:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 16:18:09 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 16:18:09 2012] Source does appear to be extended
[Thu Jun 14 16:18:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 17:52:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:52:00 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Thu Jun 14 17:52:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.132
[Thu Jun 14 17:52:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.97"
[Thu Jun 14 18:45:24 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 18:45:24 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 18:45:24 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun 14 18:45:25 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 18:45:25 2012] fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 18:45:25 2012] Fit fullrun_mos1_xmm0112370701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 19:28:38 2012] Spatial fit model total counts = 1095.530000, observed total counts = 1101.000000
[Thu Jun 14 19:28:38 2012] Offset between fit and detection position for source 2 = 0.027631 pixels
[Thu Jun 14 19:28:38 2012] 1099.942000 total counts/ 373.414000 bgd. counts: snr = 37.597335
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.027631 pixels
  Position = (257.4, 164.7) = 2 17 18.54 -5 29 22.1
  Extent = 6.8 (6.3-7.1)", rotation angle = 0
  Source counts = 726.5 +/- 33.2
  Background counts = 373.4
  Rate = 0.01 +/- 0.0007
[Thu Jun 14 19:28:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 19:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 19:28:38 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 19:28:38 2012] Source does appear to be extended
[Thu Jun 14 19:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:53:48 2012] XMMSAS src. selection expression = ellipse(22349.129200, 14283.955200, 405.885612, 405.885612, 0.000000, X, Y)
[Thu Jun 14 20:53:48 2012] Writing source region out to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 14 20:53:48 2012] Extracting stamp from image fullrun_mos1_xmm0112370701_pi300-10000_cl_sm2.00.img.gz, (234, 141) - (281, 188)
[Thu Jun 14 20:53:48 2012] XMMSAS bgd. selection expression = annulus(22349.129200, 14283.955200, 676.476019, 1352.952039, X, Y) && !ellipse(21698.290070, 14908.424347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22013.180527, 13441.560486, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:53:48 2012] Writing fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2.gif
[Thu Jun 14 20:53:51 2012] Mean detx,y = (10750.74, -959.38) 
[Thu Jun 14 20:53:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:53:57 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:53:57 2012] Setting source spectrum file to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 20:53:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 14 21:37:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:37:58 2012] Error reading totcts from fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 21:37:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:37:58 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 21:37:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:37:58 2012] Updating source flux to 2.7e-13
[Thu Jun 14 21:38:26 2012] Reading fit data from xmm0112370701/analysis//spectral/fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2_pl.csv
[Thu Jun 14 21:38:26 2012] Spectral fit parameter nH value = 7.23767e+19
[Thu Jun 14 21:38:26 2012] Spectral fit parameter PhoIndex value = 2.01809
[Thu Jun 14 21:38:26 2012] Failed to get F(0.3-8.0) from xmm0112370701/analysis//spectral/fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 21:38:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:38:26 2012] Using Nh = 7.2e+19, photon index=2.02, rate=0.0148, arf fullrun_mos1_xmm0112370701_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 21:38:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:38:26 2012] Updating source flux to 2.4e-13