[Mon Aug 20 10:45:40 2012] Detection parameters:
  Position = (141.5, 252.0) = 2 17 4.51 -5 2 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1041.9 +/- 40.3
  Background counts = 56.2
  Rate = 0.02 +/- 0.0009

[Mon Aug 20 10:45:41 2012] Off-axis axis estimate = 11.86'
[Mon Aug 20 10:51:25 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 10:51:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 10:51:25 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Mon Aug 20 10:51:25 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Mon Aug 20 10:51:25 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.36"
[Mon Aug 20 12:27:43 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_src2.ximg exists
[Mon Aug 20 12:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_src2.csv
[Mon Aug 20 12:27:43 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Aug 20 12:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_src2.csv
[Mon Aug 20 12:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 12:27:44 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Aug 20 12:27:44 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Aug 20 12:27:44 2012] Fit fullrun_pn_xmm0112370601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Aug 20 14:13:49 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.384742 pixels away
[Mon Aug 20 14:13:49 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 14:13:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 14:13:49 2012] Assessing source extent using major
[Mon Aug 20 14:13:49 2012] Source does appear to be extended
[Mon Aug 20 14:13:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 14:14:23 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 14:14:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 14:14:23 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Mon Aug 20 14:14:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Mon Aug 20 14:14:23 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.36"
[Mon Aug 20 15:37:53 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_src2.ximg exists
[Mon Aug 20 15:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_src2.csv
[Mon Aug 20 15:37:53 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Aug 20 15:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_src2.csv
[Mon Aug 20 15:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 15:37:53 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Aug 20 15:37:53 2012] fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Aug 20 15:37:53 2012] Fit fullrun_pn_xmm0112370601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Aug 20 17:17:20 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.769318 pixels away
[Mon Aug 20 17:17:21 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:17:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:17:21 2012] Assessing source extent using major
[Mon Aug 20 17:17:21 2012] Source does appear to be extended
[Mon Aug 20 17:17:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 17:17:53 2012] Counts = 1041.920410, rescaling region sizes by 2.000000
[Mon Aug 20 17:17:53 2012] XMMSAS src. selection expression = ellipse(12265.970596, 21877.159393, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Aug 20 17:17:53 2012] Writing source region out to fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug 20 17:17:53 2012] Extracting stamp from image fullrun_pn_xmm0112370601_pi300-10000_cl_sm2.00.img.gz, (67, 177) - (217, 327)
[Mon Aug 20 17:17:53 2012] XMMSAS bgd. selection expression = annulus(12265.970596, 21877.159393, 4350.000000, 8700.000000, X, Y) && !ellipse(11870.707092, 30905.451111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12586.151199, 29893.876984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18983.656200, 29370.956600, 448.348013, 448.348013, 0.000000, X, Y) && !ellipse(11973.742142, 28251.574097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10988.434219, 27337.142181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15180.463959, 27270.859375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18893.488400, 25650.507600, 353.551210, 353.551210, 0.000000, X, Y) && !ellipse(20278.640594, 25283.808899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13284.938980, 18446.066360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11946.163025, 16769.497665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20802.107498, 16254.641022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11724.957932, 14210.768936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17448.113861, 13301.773193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19325.757000, 27092.563600, 417.521612, 417.521612, 0.000000, X, Y) && !ellipse(20086.603653, 21544.088623, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 17:17:53 2012] Writing fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2.gif
[Mon Aug 20 17:23:14 2012] Mean detx,y = (11237.93, -5667.77) 
[Mon Aug 20 17:23:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 17:26:46 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 17:26:47 2012] Setting source spectrum file to fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug 20 17:26:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug 20 18:15:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 18:15:30 2012] rmf not generated due to insufficient counts
[Mon Aug 20 19:56:05 2012] Updating aperture counts using extracted products
[Mon Aug 20 19:56:05 2012] Error reading totcts from fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug 20 19:56:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 19:56:08 2012] Using photon index=1.80, rate=0.0228, arf fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2.arf
[Mon Aug 20 19:56:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 19:56:08 2012] Updating source flux to 9.8e-14
[Mon Aug 20 19:58:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 20 19:59:07 2012] xmm0112370601/analysis//spectral/fullrun_pn_xmm0112370601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete