[Tue Mar  6 10:53:27 2012] Detection parameters:
  Position = (317.8, 421.5) = 2 19 25.31 -4 49 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.7 +/- 15.6
  Background counts = 64.7
  Rate = 0.001 +/- 0.0002

[Tue Mar  6 10:53:28 2012] Off-axis axis estimate = 9.04'
[Tue Mar  6 12:29:36 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 12:29:36 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Tue Mar  6 12:29:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Tue Mar  6 12:29:36 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.95"
[Tue Mar  6 13:27:17 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_src28.ximg exists
[Tue Mar  6 13:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_src28.csv
[Tue Mar  6 13:27:17 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Mar  6 13:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_src28.csv
[Tue Mar  6 13:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 13:27:18 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Mar  6 13:27:18 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Mar  6 13:27:18 2012] Fit fullrun_mos1_xmm0112370301_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Mar  6 14:17:16 2012] Spatial fit model total counts = 257.940000, observed total counts = 258.000000
[Tue Mar  6 14:17:16 2012] Offset between fit and detection position for source 10 = 0.350363 pixels
[Tue Mar  6 14:17:16 2012] 257.819900 total counts/ 223.249000 bgd. counts: snr = 2.313747
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.350363 pixels
  Position = (317.5, 421.7) = 2 19 25.40 -4 49 53.5
  Extent = 3.8 (2.8-5.7)", rotation angle = 0
  Source counts = 34.6 +/- 16.1
  Background counts = 223.2
  Rate = 0.0007 +/- 0.0003
[Tue Mar  6 14:17:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 14:17:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 14:17:16 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 14:17:16 2012] Source does appear to be extended
[Tue Mar  6 14:17:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 15:42:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 15:42:56 2012] Initial guess for spatial extent in simple fitting = 3.78"
[Tue Mar  6 15:42:56 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.199
[Tue Mar  6 15:42:56 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 3.78"
[Tue Mar  6 16:32:25 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_src28.ximg exists
[Tue Mar  6 16:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_src28.csv
[Tue Mar  6 16:32:25 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Mar  6 16:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_src28.csv
[Tue Mar  6 16:32:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 16:32:25 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Mar  6 16:32:25 2012] fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Mar  6 16:32:25 2012] Fit fullrun_mos1_xmm0112370301_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Mar  6 17:22:38 2012] Warning, spatial fit 28 centroid is now closest to src. 13
[Tue Mar  6 17:22:38 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 17:22:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 17:22:38 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 17:22:38 2012] Source does appear to be extended
[Tue Mar  6 17:22:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 19:03:49 2012] XMMSAS src. selection expression = ellipse(27573.447800, 36637.325600, 226.993807, 226.993807, 0.000000, X, Y)
[Tue Mar  6 19:03:49 2012] Writing source region out to fullrun_mos1_xmm0112370301_pi300-10000_pass1_cl_src10_src.reg
[Tue Mar  6 19:03:49 2012] Extracting stamp from image fullrun_mos1_xmm0112370301_pi300-10000_cl_sm2.00.img.gz, (304, 409) - (331, 435)
[Tue Mar  6 19:03:49 2012] XMMSAS bgd. selection expression = annulus(27573.447800, 36637.325600, 378.323011, 756.646022, X, Y)
[Tue Mar  6 19:03:49 2012] Writing fullrun_mos1_xmm0112370301_pi300-10000_pass1_cl_src10.gif
[Tue Mar  6 19:19:31 2012] Mean detx,y = (-12174.11, -158.24) 
[Tue Mar  6 19:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 19:19:47 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 19:19:47 2012] Setting source spectrum file to fullrun_mos1_xmm0112370301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar  6 19:19:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112370301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Mar  6 19:42:00 2012] Not generating rmf since there are only 34 counts
[Tue Mar  6 19:42:00 2012] rmf not generated due to insufficient counts
[Tue Mar  6 20:17:30 2012] Updating aperture counts using extracted products
[Tue Mar  6 20:17:30 2012] Error reading totcts from fullrun_mos1_xmm0112370301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar  6 20:17:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 20:17:31 2012] Using photon index=1.80, rate=0.000672, arf fullrun_mos1_xmm0112370301_pi300-10000_pass1_cl_src10.arf
[Tue Mar  6 20:17:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 20:17:31 2012] Updating source flux to 1.7e-14
[Tue Mar  6 20:17:36 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting