[Tue Jun 25 13:27:07 2013] Detection parameters:
  Position = (187.2, 352.3) = 2 18 27.19 -4 54 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 651.3 +/- 34.6
  Background counts = 95.8
  Rate = 0.02 +/- 0.001

[Tue Jun 25 13:27:10 2013] Off-axis axis estimate = 8.96'
[Tue Jun 25 13:27:43 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:43 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Tue Jun 25 13:27:43 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Tue Jun 25 13:27:43 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.91"
[Tue Jun 25 13:27:44 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 25 13:27:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 25 13:27:44 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 25 13:27:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 25 13:27:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:45 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 25 13:27:45 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 25 13:27:45 2013] Fit fullrun_pn_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 25 13:28:06 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Tue Jun 25 13:28:06 2013] Source 3 is offset by -1.088581 and -8.003788 pixels which is larger than
2 X fitted extent = 1.283113 x 1.283113, not incorporating fit results
[Tue Jun 25 13:28:06 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:06 2013] Assessing source extent using major
[Tue Jun 25 13:28:06 2013] Source does appear to be extended
[Tue Jun 25 13:28:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:38 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:38 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Tue Jun 25 13:28:38 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Tue Jun 25 13:28:38 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.91"
[Tue Jun 25 13:28:40 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 25 13:28:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 13:28:40 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 25 13:28:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 13:28:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:41 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 25 13:28:41 2013] fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 25 13:28:41 2013] Fit fullrun_pn_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 25 13:29:01 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.544946 pixels away
[Tue Jun 25 13:29:01 2013] Source 3 is offset by 5.142591 and -2.772616 pixels which is larger than
2 X fitted extent = 0.629214 x 0.629214, not incorporating fit results
[Tue Jun 25 13:29:01 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:01 2013] Assessing source extent using major
[Tue Jun 25 13:29:01 2013] Source does appear to be extended
[Tue Jun 25 13:29:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:29:36 2013] XMMSAS src. selection expression = ellipse(16235.839432, 30598.216431, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 13:29:36 2013] Not overwriting source region fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 25 13:29:36 2013] Extracting stamp from image fullrun_pn_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (150, 315) - (225, 390)
[Tue Jun 25 13:29:36 2013] XMMSAS bgd. selection expression = annulus(16235.839432, 30598.216431, 1087.500000, 2175.000000, X, Y) && !ellipse(14991.820145, 30455.259033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15421.428000, 30279.250000, 361.546410, 361.546410, 0.000000, X, Y) && !ellipse(15227.209136, 28897.318609, 452.366992, 384.017101, 121.354084, X, Y) && !ellipse(17199.836600, 32774.488400, 670.259219, 453.784813, 348.497062, X, Y)
[Tue Jun 25 13:29:36 2013] Writing fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 25 13:29:38 2013] ../../xmm0112370101/products/events/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112370101/products/events/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Jun 25 13:29:38 2013] Mean detx,y = (9614.47, 3246.92) 
[Tue Jun 25 13:29:38 2013] ../../xmm0112370101/products/images/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112370101/products/images/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Jun 25 13:29:38 2013] ../../xmm0112370101/products/spectra/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112370101/products/spectra/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Jun 25 13:29:38 2013] Setting source spectrum file to fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 25 13:29:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 25 13:29:38 2013] ../../xmm0112370101/products/lightcurves/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112370101/products/lightcurves/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Jun 25 13:30:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 13:30:04 2013] rmf not generated due to insufficient counts
[Tue Jun 25 13:30:04 2013] fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Jun 25 15:05:23 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:23 2013] Total counts from fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1020.00
[Tue Jun 25 15:05:23 2013] Total counts from fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1794.00
[Tue Jun 25 15:05:23 2013] Got source and background scale factors 1344000.000000, 7481705.000000
[Tue Jun 25 15:05:23 2013] User source parameters:
  Position = (187.2, 352.3) = 2 18 27.19 -4 54 56.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 697.7 +/- 32.9
  Background aperture counts = 322.3
  Rate = 0.02 +/- 0.0008

[Tue Jun 25 15:05:23 2013] Updating counts from extracted products
[Tue Jun 25 15:05:23 2013] Set source signif. to 697.73/17.95 = 38.87
[Tue Jun 25 15:05:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:35 2013] Using photon index=1.80, rate=0.017, arf fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 25 15:05:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:35 2013] Updating source flux to 7.1e-14
[Tue Jun 25 15:06:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 15:06:14 2013] xmm0112370101/analysis//spectral/fullrun_pn_xmm0112370101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete