[Tue Jun 25 13:27:14 2013] Detection parameters:
  Position = (173.0, 350.7) = 2 18 31.33 -4 55 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.4 +/- 21.7
  Background counts = 47.2
  Rate = 0.007 +/- 0.0006

[Tue Jun 25 13:27:16 2013] Off-axis axis estimate = 9.86'
[Tue Jun 25 13:27:48 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:48 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Tue Jun 25 13:27:48 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Tue Jun 25 13:27:48 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.36"
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src8.csv
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src8.csv
[Tue Jun 25 13:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 25 13:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:21 2013] Warning, spatial fit 8 centroid is now closest to src. 7
[Tue Jun 25 13:28:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:21 2013] Assessing source extent using major
[Tue Jun 25 13:28:21 2013] Source does appear to be extended
[Tue Jun 25 13:28:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:21 2013] Source is confused with source 2
[Tue Jun 25 13:28:44 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 13:28:44 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Tue Jun 25 13:28:44 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Tue Jun 25 13:28:44 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 11.36"
[Tue Jun 25 13:28:45 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jun 25 13:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src8.csv
[Tue Jun 25 13:28:45 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jun 25 13:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src8.csv
[Tue Jun 25 13:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jun 25 13:28:46 2013] Fit fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jun 25 13:29:17 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.925974 pixels away
[Tue Jun 25 13:29:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:17 2013] Assessing source extent using major
[Tue Jun 25 13:29:17 2013] Source does appear to be extended
[Tue Jun 25 13:29:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 14:17:31 2013] XMMSAS src. selection expression = ellipse(14999.973740, 30466.686279, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing source region out to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8_src.reg
[Tue Jun 25 14:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (135, 313) - (210, 388)
[Tue Jun 25 14:17:31 2013] XMMSAS bgd. selection expression = annulus(14999.973740, 30466.686279, 1087.500000, 2175.000000, X, Y) && !ellipse(15534.912000, 30274.502000, 336.332810, 336.332810, 0.000000, X, Y) && !ellipse(15232.905000, 28895.111200, 424.435212, 424.435212, 0.000000, X, Y) && !ellipse(16230.428482, 30591.682404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12921.549103, 28124.355713, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8.gif
[Tue Jun 25 14:23:41 2013] Mean detx,y = (-10295.92, -2811.98) 
[Tue Jun 25 14:23:42 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 14:23:51 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 14:23:51 2013] Setting source spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jun 25 14:23:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jun 25 14:47:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 14:47:47 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:45 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:45 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 941.00
[Tue Jun 25 15:05:45 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1020.00
[Tue Jun 25 15:05:45 2013] Got source and background scale factors 1342400.000000, 8959180.000000
[Tue Jun 25 15:05:45 2013] User source parameters:
  Position = (173.0, 350.7) = 2 18 31.33 -4 55 2.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 788.2 +/- 31.7
  Background aperture counts = 152.8
  Rate = 0.02 +/- 0.0006

[Tue Jun 25 15:05:45 2013] Updating counts from extracted products
[Tue Jun 25 15:05:45 2013] Set source signif. to 788.17/12.36 = 63.75
[Tue Jun 25 15:05:50 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:50 2013] Using photon index=1.80, rate=0.0158, arf fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8.arf
[Tue Jun 25 15:05:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:50 2013] Updating source flux to 2.7e-13
[Tue Jun 25 15:05:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 15:06:03 2013] xmm0112370101/analysis//spectral/fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete