[Tue Jun 25 13:27:15 2013] Detection parameters:
  Position = (282.3, 285.4) = 2 17 59.52 -4 59 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.8 +/- 15.5
  Background counts = 57.2
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 13:27:16 2013] Off-axis axis estimate = 1.51'
[Tue Jun 25 13:27:48 2013] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:48 2013] Initial guess for spatial extent in simple fitting = 7.18"
[Tue Jun 25 13:27:48 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.080
[Tue Jun 25 13:27:48 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 7.18"
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src33.csv
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src33.csv
[Tue Jun 25 13:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:50 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jun 25 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jun 25 13:27:50 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jun 25 13:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jun 25 13:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:21 2013] Source 30 is offset by -6.265428 and 6.342736 pixels which is larger than
2 X fitted extent = 0.931196 x 0.931196, not incorporating fit results
[Tue Jun 25 13:28:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:21 2013] Assessing source extent using major
[Tue Jun 25 13:28:21 2013] Source does appear to be extended
[Tue Jun 25 13:28:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:44 2013] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:44 2013] Initial guess for spatial extent in simple fitting = 7.18"
[Tue Jun 25 13:28:44 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.080
[Tue Jun 25 13:28:44 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 7.18"
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src32.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src32.csv
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src32.csv
[Tue Jun 25 13:28:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Jun 25 13:28:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:29:17 2013] Source 30 is offset by -6.349122 and 5.955384 pixels which is larger than
2 X fitted extent = 0.825628 x 0.825628, not incorporating fit results
[Tue Jun 25 13:29:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:17 2013] Assessing source extent using major
[Tue Jun 25 13:29:17 2013] Source does appear to be extended
[Tue Jun 25 13:29:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 14:17:31 2013] XMMSAS src. selection expression = ellipse(24507.762421, 24776.982391, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing source region out to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30_src.reg
[Tue Jun 25 14:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (245, 248) - (320, 323)
[Tue Jun 25 14:17:31 2013] XMMSAS bgd. selection expression = annulus(24507.762421, 24776.982391, 1087.500000, 2175.000000, X, Y) && !ellipse(21904.705322, 26053.132843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.166962, 27190.218170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22456.242200, 23651.803000, 387.192011, 387.192011, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30.gif
[Tue Jun 25 14:30:47 2013] Mean detx,y = (147.33, -136.39) 
[Tue Jun 25 14:30:48 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 14:30:58 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 14:30:58 2013] Setting source spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jun 25 14:30:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Jun 25 15:03:15 2013] Not generating rmf since there are only 91 counts
[Tue Jun 25 15:03:15 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:49 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:49 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 215.00
[Tue Jun 25 15:05:49 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1354.00
[Tue Jun 25 15:05:49 2013] Got source and background scale factors 1272784.000000, 10254044.000000
[Tue Jun 25 15:05:49 2013] User source parameters:
  Position = (282.3, 285.4) = 2 17 59.52 -4 59 50.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.9 +/- 15.7
  Background aperture counts = 168.1
  Rate = 0.0009 +/- 0.0003

[Tue Jun 25 15:05:49 2013] Updating counts from extracted products
[Tue Jun 25 15:05:49 2013] Set source signif. to 46.93/12.96 = 3.62
[Tue Jun 25 15:05:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:51 2013] Using photon index=1.80, rate=0.000939, arf fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30.arf
[Tue Jun 25 15:05:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:51 2013] Updating source flux to 9.9e-15
[Tue Jun 25 15:05:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 15:06:03 2013] xmm0112370101/analysis//spectral/fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete