[Tue Jun 25 13:27:14 2013] Detection parameters:
  Position = (175.6, 332.8) = 2 18 30.57 -4 56 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 436.9 +/- 27.8
  Background counts = 48.3
  Rate = 0.01 +/- 0.0008

[Tue Jun 25 13:27:16 2013] Off-axis axis estimate = 9.25'
[Tue Jun 25 13:27:48 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:48 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Tue Jun 25 13:27:48 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Tue Jun 25 13:27:48 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.05"
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src5.csv
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src5.csv
[Tue Jun 25 13:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 25 13:27:49 2013] Fit fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jun 25 13:28:21 2013] Spatial fit model total counts = 562.851000, observed total counts = 562.000000
[Tue Jun 25 13:28:21 2013] Offset between fit and detection position for source 3 = 0.119775 pixels
[Tue Jun 25 13:28:21 2013] 563.401000 total counts/ 290.481000 bgd. counts: snr = 16.013140
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.119775 pixels
  Position = (175.6, 332.7) = 2 18 30.55 -4 56 23.1
  Extent = 5.3 (4.8-6.0)", rotation angle = 0
  Source counts = 272.9 +/- 23.7
  Background counts = 290.5
  Rate = 0.005 +/- 0.0005
[Tue Jun 25 13:28:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:21 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:28:21 2013] Source does appear to be extended
[Tue Jun 25 13:28:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:44 2013] Initial guess for spatial extent in simple fitting = 5.27"
[Tue Jun 25 13:28:44 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.768
[Tue Jun 25 13:28:44 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.27"
[Tue Jun 25 13:28:45 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 25 13:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src5.csv
[Tue Jun 25 13:28:45 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 25 13:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src5.csv
[Tue Jun 25 13:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 25 13:28:46 2013] Fit fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jun 25 13:29:17 2013] Spatial fit model total counts = 570.297000, observed total counts = 570.000000
[Tue Jun 25 13:29:17 2013] Offset between fit and detection position for source 3 = 0.015944 pixels
[Tue Jun 25 13:29:17 2013] 571.208000 total counts/ 297.587000 bgd. counts: snr = 15.861434
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.015944 pixels
  Position = (175.6, 332.7) = 2 18 30.55 -4 56 23.2
  Extent = 5.3 (4.8-5.9)", rotation angle = 0
  Source counts = 273.6 +/- 23.9
  Background counts = 297.6
  Rate = 0.005 +/- 0.0005
[Tue Jun 25 13:29:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:17 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:29:17 2013] Source does appear to be extended
[Tue Jun 25 13:29:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 14:17:31 2013] XMMSAS src. selection expression = ellipse(15232.905000, 28895.111200, 318.326409, 318.326409, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing source region out to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 25 14:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (157, 314) - (194, 351)
[Tue Jun 25 14:17:31 2013] XMMSAS bgd. selection expression = annulus(15232.905000, 28895.111200, 530.544015, 1061.088031, X, Y) && !ellipse(15534.912000, 30274.502000, 336.332810, 336.332810, 0.000000, X, Y) && !ellipse(16230.428482, 30591.682404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14999.973740, 30466.686279, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 25 14:23:01 2013] Mean detx,y = (-9892.72, -1417.60) 
[Tue Jun 25 14:23:03 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 14:23:11 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 14:23:11 2013] Setting source spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 25 14:23:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 25 15:05:44 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:45 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 321.00
[Tue Jun 25 15:05:45 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 310.00
[Tue Jun 25 15:05:45 2013] Got source and background scale factors 321600.000000, 2400000.000000
[Tue Jun 25 15:05:45 2013] User source parameters:
  Position = (175.6, 332.7) = 2 18 30.55 -4 56 23.2
  Extent = 5.3 (4.8-5.9)", rotation angle = 0
  Source aperture counts = 279.5 +/- 18.9
  Background aperture counts = 41.5
  Rate = 0.006 +/- 0.0004

[Tue Jun 25 15:05:50 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:50 2013] Using photon index=1.80, rate=0.00547, arf fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 25 15:05:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:50 2013] Updating source flux to 1.1e-13
[Tue Jun 25 15:06:03 2013] xmm0112370101/analysis//spectral/fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete