[Tue Jun 25 13:27:15 2013] Detection parameters:
  Position = (295.6, 344.4) = 2 17 55.64 -4 55 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 14.3
  Background counts = 50.9
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 13:27:16 2013] Off-axis axis estimate = 3.34'
[Tue Jun 25 13:27:48 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:48 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Tue Jun 25 13:27:48 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Tue Jun 25 13:27:48 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.10"
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src34.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src34.csv
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src34.csv
[Tue Jun 25 13:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:50 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Jun 25 13:27:50 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Jun 25 13:27:50 2013] Fit fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Tue Jun 25 13:28:21 2013] Source 24 is offset by 7.045106 and 6.891572 pixels which is larger than
2 X fitted extent = 0.930979 x 0.930979, not incorporating fit results
[Tue Jun 25 13:28:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:21 2013] Assessing source extent using major
[Tue Jun 25 13:28:21 2013] Source does appear to be extended
[Tue Jun 25 13:28:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:44 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:44 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Tue Jun 25 13:28:44 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Tue Jun 25 13:28:44 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.10"
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src33.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src33.csv
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src33.csv
[Tue Jun 25 13:28:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Jun 25 13:28:46 2013] Fit fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Jun 25 13:29:17 2013] Source 24 is offset by 7.045106 and 6.891572 pixels which is larger than
2 X fitted extent = 0.930979 x 0.930979, not incorporating fit results
[Tue Jun 25 13:29:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:17 2013] Assessing source extent using major
[Tue Jun 25 13:29:17 2013] Source does appear to be extended
[Tue Jun 25 13:29:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 14:17:31 2013] XMMSAS src. selection expression = ellipse(25668.464233, 29918.106781, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing source region out to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24_src.reg
[Tue Jun 25 14:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (258, 307) - (333, 382)
[Tue Jun 25 14:17:31 2013] XMMSAS bgd. selection expression = annulus(25668.464233, 29918.106781, 1087.500000, 2175.000000, X, Y) && !ellipse(26235.166962, 27190.218170, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24.gif
[Tue Jun 25 14:31:02 2013] Mean detx,y = (-56.80, -5396.67) 
[Tue Jun 25 14:31:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 14:31:27 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 14:31:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Jun 25 14:31:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Jun 25 15:03:21 2013] Not generating rmf since there are only 74 counts
[Tue Jun 25 15:03:21 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:49 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:49 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 230.00
[Tue Jun 25 15:05:49 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1121.00
[Tue Jun 25 15:05:49 2013] Got source and background scale factors 1188568.000000, 9584375.000000
[Tue Jun 25 15:05:49 2013] User source parameters:
  Position = (295.6, 344.4) = 2 17 55.64 -4 55 31.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 91.0 +/- 16.2
  Background aperture counts = 139.0
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 15:05:49 2013] Updating counts from extracted products
[Tue Jun 25 15:05:49 2013] Set source signif. to 90.98/11.79 = 7.72
[Tue Jun 25 15:05:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:51 2013] Using photon index=1.80, rate=0.00182, arf fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24.arf
[Tue Jun 25 15:05:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:51 2013] Updating source flux to 2.2e-14
[Tue Jun 25 15:05:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 15:06:03 2013] xmm0112370101/analysis//spectral/fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete