[Tue Jun 25 13:27:15 2013] Detection parameters:
  Position = (233.1, 384.1) = 2 18 13.81 -4 52 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.2 +/- 16.0
  Background counts = 50.3
  Rate = 0.003 +/- 0.0004

[Tue Jun 25 13:27:16 2013] Off-axis axis estimate = 7.81'
[Tue Jun 25 13:27:48 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:48 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Tue Jun 25 13:27:48 2013] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.877
[Tue Jun 25 13:27:48 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.33"
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jun 25 13:27:49 2013] Fit fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_src17 appears to have run properly
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Jun 25 13:27:49 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jun 25 13:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Jun 25 13:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:21 2013] Warning, spatial fit 17 centroid is now closest to src. 5
[Tue Jun 25 13:28:21 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:21 2013] Assessing source extent using major
[Tue Jun 25 13:28:21 2013] Source does appear to be extended
[Tue Jun 25 13:28:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:44 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:44 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Tue Jun 25 13:28:44 2013] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.877
[Tue Jun 25 13:28:44 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.33"
[Tue Jun 25 13:28:45 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jun 25 13:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src17.csv
[Tue Jun 25 13:28:45 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jun 25 13:28:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src17.csv
[Tue Jun 25 13:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jun 25 13:28:46 2013] fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jun 25 13:28:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jun 25 13:28:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:29:17 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.774028 pixels away
[Tue Jun 25 13:29:17 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:17 2013] Assessing source extent using major
[Tue Jun 25 13:29:17 2013] Source does appear to be extended
[Tue Jun 25 13:29:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 14:17:31 2013] XMMSAS src. selection expression = ellipse(20234.916245, 33366.421661, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing source region out to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21_src.reg
[Tue Jun 25 14:17:31 2013] Extracting stamp from image fullrun_mos2_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (196, 347) - (271, 422)
[Tue Jun 25 14:17:31 2013] XMMSAS bgd. selection expression = annulus(20234.916245, 33366.421661, 1087.500000, 2175.000000, X, Y) && !ellipse(19132.410019, 35117.493134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20448.800095, 35580.522278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21639.367400, 31350.861000, 334.524010, 334.524010, 0.000000, X, Y)
[Tue Jun 25 14:17:31 2013] Writing fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21.gif
[Tue Jun 25 14:26:30 2013] Mean detx,y = (-6398.95, -7189.78) 
[Tue Jun 25 14:26:31 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 14:26:52 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 14:26:52 2013] Setting source spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 25 14:26:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jun 25 15:01:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 15:01:42 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:46 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:46 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 213.00
[Tue Jun 25 15:05:47 2013] Total counts from fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 970.00
[Tue Jun 25 15:05:47 2013] Got source and background scale factors 1090250.000000, 8274082.000000
[Tue Jun 25 15:05:47 2013] User source parameters:
  Position = (233.1, 384.1) = 2 18 13.81 -4 52 39.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 85.2 +/- 15.6
  Background aperture counts = 127.8
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 15:05:47 2013] Updating counts from extracted products
[Tue Jun 25 15:05:47 2013] Set source signif. to 85.19/11.31 = 7.53
[Tue Jun 25 15:05:50 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:50 2013] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21.arf
[Tue Jun 25 15:05:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:50 2013] Updating source flux to 2.7e-14
[Tue Jun 25 15:05:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 15:06:03 2013] xmm0112370101/analysis//spectral/fullrun_mos2_xmm0112370101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete