[Tue Jun 25 13:27:13 2013] Detection parameters:
  Position = (290.6, 230.2) = 2 17 57.09 -5 3 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.7 +/- 14.6
  Background counts = 49.0
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 13:27:13 2013] Off-axis axis estimate = 4.98'
[Tue Jun 25 13:27:46 2013] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:46 2013] Initial guess for spatial extent in simple fitting = 8.92"
[Tue Jun 25 13:27:46 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.884
[Tue Jun 25 13:27:46 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.92"
[Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src22.ximg exists
[Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src22.csv
[Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src22.csv
[Tue Jun 25 13:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Jun 25 13:27:48 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Tue Jun 25 13:28:12 2013] Spatial fit model total counts = 314.885000, observed total counts = 298.000000
[Tue Jun 25 13:28:12 2013] Offset between fit and detection position for source 36 = 0.105289 pixels
[Tue Jun 25 13:28:12 2013] 315.684200 total counts/ 277.809000 bgd. counts: snr = 2.272384
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.105289 pixels
  Position = (290.6, 230.1) = 2 17 57.10 -5 3 49.5
  Extent = 2.5 (2.2-3.7)", rotation angle = 0
  Source counts = 37.9 +/- 17.8
  Background counts = 277.8
  Rate = 0.0008 +/- 0.0004
[Tue Jun 25 13:28:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:12 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:28:12 2013] Source does appear to be extended
[Tue Jun 25 13:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:43 2013] Initial guess for spatial extent in simple fitting = 2.52"
[Tue Jun 25 13:28:43 2013] source mask rpix=0.6, npix_max = 4, mask sum = 6, frac = 1.287
[Tue Jun 25 13:28:43 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 2.52"
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jun 25 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src21.csv
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jun 25 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src21.csv
[Tue Jun 25 13:28:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jun 25 13:28:44 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Jun 25 13:29:10 2013] Spatial fit model total counts = 314.759000, observed total counts = 298.000000
[Tue Jun 25 13:29:10 2013] Offset between fit and detection position for source 36 = 0.003679 pixels
[Tue Jun 25 13:29:10 2013] 315.528700 total counts/ 277.307000 bgd. counts: snr = 2.295248
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.003679 pixels
  Position = (290.6, 230.1) = 2 17 57.10 -5 3 49.5
  Extent = 2.6 (1.9-3.7)", rotation angle = 0
  Source counts = 38.2 +/- 17.8
  Background counts = 277.3
  Rate = 0.0008 +/- 0.0004
[Tue Jun 25 13:29:10 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:10 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:29:10 2013] Source does appear to be extended
[Tue Jun 25 13:29:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:30:05 2013] XMMSAS src. selection expression = ellipse(25232.155800, 19969.975600, 154.288804, 154.288804, 0.000000, X, Y)
[Tue Jun 25 13:30:05 2013] Not overwriting source region fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36_src.reg
[Tue Jun 25 13:30:05 2013] Extracting stamp from image fullrun_mos1_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (282, 221) - (299, 239)
[Tue Jun 25 13:30:05 2013] XMMSAS bgd. selection expression = annulus(25232.155800, 19969.975600, 257.148007, 514.296015, X, Y)
[Tue Jun 25 13:30:05 2013] Writing fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36.gif
[Tue Jun 25 13:31:49 2013] Mean detx,y = (4489.20, -2388.43) 
[Tue Jun 25 13:31:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 13:32:01 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 13:32:01 2013] Setting source spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Jun 25 13:32:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Jun 25 14:15:14 2013] Not generating rmf since there are only 38 counts
[Tue Jun 25 14:15:14 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:40 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:40 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 46.00
[Tue Jun 25 15:05:40 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 83.00
[Tue Jun 25 15:05:40 2013] Got source and background scale factors 80000.000000, 576676.000000
[Tue Jun 25 15:05:40 2013] User source parameters:
  Position = (290.6, 230.1) = 2 17 57.10 -5 3 49.5
  Extent = 2.6 (1.9-3.7)", rotation angle = 0
  Source aperture counts = 34.5 +/- 7.8
  Background aperture counts = 11.5
  Rate = 0.0007 +/- 0.0002

[Tue Jun 25 15:05:43 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:43 2013] Using photon index=1.80, rate=0.000762, arf fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36.arf
[Tue Jun 25 15:05:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:44 2013] Updating source flux to 1.8e-14
[Tue Jun 25 15:05:53 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 15:05:59 2013] xmm0112370101/analysis//spectral/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete