[Tue Jun 25 13:27:13 2013] Detection parameters:
  Position = (289.9, 251.7) = 2 17 57.28 -5 2 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 15.5
  Background counts = 51.6
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 13:27:13 2013] Off-axis axis estimate = 3.44'
[Tue Jun 25 13:27:46 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:46 2013] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Jun 25 13:27:46 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.887
[Tue Jun 25 13:27:46 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 8.15"
[Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src29.csv
[Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src29.csv
[Tue Jun 25 13:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jun 25 13:27:48 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Jun 25 13:28:12 2013] Source 34 is offset by -7.553544 and 6.189973 pixels which is larger than
2 X fitted extent = 0.936864 x 0.936864, not incorporating fit results
[Tue Jun 25 13:28:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:12 2013] Assessing source extent using major
[Tue Jun 25 13:28:12 2013] Source does appear to be extended
[Tue Jun 25 13:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:43 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:43 2013] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Jun 25 13:28:43 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.887
[Tue Jun 25 13:28:43 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 8.15"
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jun 25 13:28:44 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jun 25 13:28:44 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Jun 25 13:29:10 2013] Source 34 is offset by -7.553544 and 6.189973 pixels which is larger than
2 X fitted extent = 0.936864 x 0.936864, not incorporating fit results
[Tue Jun 25 13:29:10 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:10 2013] Assessing source extent using major
[Tue Jun 25 13:29:10 2013] Source does appear to be extended
[Tue Jun 25 13:29:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:30:05 2013] XMMSAS src. selection expression = ellipse(25176.399689, 21848.969620, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 13:30:05 2013] Not overwriting source region fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34_src.reg
[Tue Jun 25 13:30:05 2013] Extracting stamp from image fullrun_mos1_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (252, 214) - (327, 289)
[Tue Jun 25 13:30:05 2013] XMMSAS bgd. selection expression = annulus(25176.399689, 21848.969620, 1087.500000, 2175.000000, X, Y) && !ellipse(25232.155800, 19969.975600, 205.718406, 205.718406, 0.000000, X, Y) && !ellipse(24477.386230, 24732.622162, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 13:30:05 2013] Writing fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34.gif
[Tue Jun 25 13:34:35 2013] Mean detx,y = (2709.66, -1832.49) 
[Tue Jun 25 13:34:36 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 13:34:46 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 13:34:47 2013] Setting source spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jun 25 13:34:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Jun 25 14:16:21 2013] Not generating rmf since there are only 87 counts
[Tue Jun 25 14:16:21 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:41 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:41 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 238.00
[Tue Jun 25 15:05:42 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1353.00
[Tue Jun 25 15:05:42 2013] Got source and background scale factors 1329600.000000, 10285696.000000
[Tue Jun 25 15:05:42 2013] User source parameters:
  Position = (289.9, 251.7) = 2 17 57.28 -5 2 15.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 63.1 +/- 16.5
  Background aperture counts = 174.9
  Rate = 0.001 +/- 0.0003

[Tue Jun 25 15:05:42 2013] Updating counts from extracted products
[Tue Jun 25 15:05:42 2013] Set source signif. to 63.10/13.22 = 4.77
[Tue Jun 25 15:05:44 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:44 2013] Using photon index=1.80, rate=0.00126, arf fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34.arf
[Tue Jun 25 15:05:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:44 2013] Updating source flux to 1.3e-14
[Tue Jun 25 15:05:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 15:05:59 2013] xmm0112370101/analysis//spectral/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete