[Tue Jun 25 13:27:13 2013] Detection parameters:
  Position = (258.0, 273.7) = 2 18 6.59 -5 0 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.4 +/- 17.9
  Background counts = 44.6
  Rate = 0.003 +/- 0.0004

[Tue Jun 25 13:27:13 2013] Off-axis axis estimate = 3.44'
[Tue Jun 25 13:27:46 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:27:46 2013] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Jun 25 13:27:46 2013] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.622
[Tue Jun 25 13:27:46 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.15"
[Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src20.csv
[Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src20.csv
[Tue Jun 25 13:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jun 25 13:27:48 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Jun 25 13:28:12 2013] Spatial fit model total counts = 307.151000, observed total counts = 315.000000
[Tue Jun 25 13:28:12 2013] Offset between fit and detection position for source 31 = 0.629729 pixels
[Tue Jun 25 13:28:12 2013] 309.301200 total counts/ 259.577000 bgd. counts: snr = 3.086276
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.629729 pixels
  Position = (258.1, 273.1) = 2 18 6.54 -5 0 42.3
  Extent = 3.4 (2.8-4.6)", rotation angle = 0
  Source counts = 49.7 +/- 17.6
  Background counts = 259.6
  Rate = 0.001 +/- 0.0004
[Tue Jun 25 13:28:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:28:12 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:28:12 2013] Source does appear to be extended
[Tue Jun 25 13:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:28:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:28:43 2013] Initial guess for spatial extent in simple fitting = 3.44"
[Tue Jun 25 13:28:43 2013] source mask rpix=0.8, npix_max = 6, mask sum = 2, frac = 0.300
[Tue Jun 25 13:28:43 2013] Skipping simple spatial due to low active detector fraction
[Tue Jun 25 13:29:10 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:29:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:29:10 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:29:10 2013] Source does appear to be extended
[Tue Jun 25 13:29:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:30:05 2013] XMMSAS src. selection expression = ellipse(22408.952920, 23713.833400, 206.184826, 206.184826, 0.000000, X, Y)
[Tue Jun 25 13:30:05 2013] Not overwriting source region fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31_src.reg
[Tue Jun 25 13:30:05 2013] Extracting stamp from image fullrun_mos1_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (246, 261) - (270, 285)
[Tue Jun 25 13:30:05 2013] XMMSAS bgd. selection expression = annulus(22408.952920, 23713.833400, 343.641377, 687.282755, X, Y)
[Tue Jun 25 13:30:05 2013] Writing fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31.gif
[Tue Jun 25 13:30:53 2013] Mean detx,y = (1692.50, 1379.41) 
[Tue Jun 25 13:30:56 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 13:31:08 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 13:31:08 2013] Setting source spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jun 25 13:31:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Jun 25 14:14:55 2013] Not generating rmf since there are only 49 counts
[Tue Jun 25 14:14:55 2013] rmf not generated due to insufficient counts
[Tue Jun 25 15:05:40 2013] Updating aperture counts using extracted products
[Tue Jun 25 15:05:40 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 70.00
[Tue Jun 25 15:05:40 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 143.00
[Tue Jun 25 15:05:40 2013] Got source and background scale factors 115860.000000, 1062148.000000
[Tue Jun 25 15:05:40 2013] User source parameters:
  Position = (258.1, 273.1) = 2 18 6.54 -5 0 42.3
  Extent = 3.4 (2.8-4.6)", rotation angle = 0
  Source aperture counts = 54.4 +/- 9.4
  Background aperture counts = 15.6
  Rate = 0.001 +/- 0.0002

[Tue Jun 25 15:05:43 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 15:05:43 2013] Using photon index=1.80, rate=0.000991, arf fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31.arf
[Tue Jun 25 15:05:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 15:05:43 2013] Updating source flux to 1.5e-14
[Tue Jun 25 15:05:53 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 15:05:59 2013] xmm0112370101/analysis//spectral/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete