[Tue Jun 25 13:27:11 2013] Detection parameters: Position = (175.6, 332.8) = 2 18 30.56 -4 56 22.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 503.2 +/- 29.6 Background counts = 45.6 Rate = 0.01 +/- 0.0008 [Tue Jun 25 13:27:13 2013] Off-axis axis estimate = 9.25' [Tue Jun 25 13:27:46 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting [Tue Jun 25 13:27:46 2013] Initial guess for spatial extent in simple fitting = 11.05" [Tue Jun 25 13:27:46 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973 [Tue Jun 25 13:27:46 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.05" [Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src5.ximg exists [Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src5.csv [Tue Jun 25 13:27:47 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src5_1.ximg exists [Tue Jun 25 13:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src5.csv [Tue Jun 25 13:27:47 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Tue Jun 25 13:27:48 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Tue Jun 25 13:27:48 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Tue Jun 25 13:28:12 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.519743 pixels away [Tue Jun 25 13:28:12 2013] Spatial fit model total counts = 633.786000, observed total counts = 631.000000 [Tue Jun 25 13:28:12 2013] Offset between fit and detection position for source 3 = 0.191293 pixels [Tue Jun 25 13:28:12 2013] 642.676000 total counts/ 321.190000 bgd. counts: snr = 17.938291 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.191293 pixels Position = (175.5, 332.6) = 2 18 30.60 -4 56 23.5 Extent = 5.7 (5.2-6.3)", rotation angle = 0 Source counts = 321.5 +/- 25.4 Background counts = 321.2 Rate = 0.006 +/- 0.0005 [Tue Jun 25 13:28:12 2013] Vigneting correction estimate = 1.000000 [Tue Jun 25 13:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 25 13:28:12 2013] Assessing source extent using major axis lower bound [Tue Jun 25 13:28:12 2013] Source does appear to be extended [Tue Jun 25 13:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 25 13:28:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Jun 25 13:28:43 2013] Initial guess for spatial extent in simple fitting = 5.68" [Tue Jun 25 13:28:43 2013] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.690 [Tue Jun 25 13:28:43 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.68" [Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src5.ximg exists [Tue Jun 25 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src5.csv [Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src5_1.ximg exists [Tue Jun 25 13:28:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src5.csv [Tue Jun 25 13:28:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Tue Jun 25 13:28:44 2013] fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Tue Jun 25 13:28:44 2013] Fit fullrun_mos1_xmm0112370101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Tue Jun 25 13:29:10 2013] Spatial fit model total counts = 627.398000, observed total counts = 627.000000 [Tue Jun 25 13:29:10 2013] Offset between fit and detection position for source 3 = 0.006594 pixels [Tue Jun 25 13:29:10 2013] 634.274000 total counts/ 315.515000 bgd. counts: snr = 17.945371 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.006594 pixels Position = (175.5, 332.6) = 2 18 30.60 -4 56 23.4 Extent = 5.7 (5.2-6.2)", rotation angle = 0 Source counts = 318.8 +/- 25.2 Background counts = 315.5 Rate = 0.006 +/- 0.0005 [Tue Jun 25 13:29:10 2013] Vigneting correction estimate = 1.000000 [Tue Jun 25 13:29:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 25 13:29:10 2013] Assessing source extent using major axis lower bound [Tue Jun 25 13:29:10 2013] Source does appear to be extended [Tue Jun 25 13:29:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 25 13:30:04 2013] XMMSAS src. selection expression = ellipse(15219.352800, 28889.501000, 340.361410, 340.361410, 0.000000, X, Y) [Tue Jun 25 13:30:04 2013] Not overwriting source region fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src.reg [Tue Jun 25 13:30:04 2013] Extracting stamp from image fullrun_mos1_xmm0112370101_pi300-10000_cl_sm2.00.img.gz, (156, 313) - (195, 352) [Tue Jun 25 13:30:04 2013] XMMSAS bgd. selection expression = annulus(15219.352800, 28889.501000, 567.269016, 1134.538033, X, Y) && !ellipse(15746.914000, 30411.756000, 1747.840050, 469.663214, 331.067000, X, Y) && !ellipse(14975.693497, 30456.485657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16218.191452, 30644.716614, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jun 25 13:30:04 2013] Writing fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3.gif [Tue Jun 25 13:30:13 2013] ../../xmm0112370101/products/events/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112370101/products/events/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create [Tue Jun 25 13:30:13 2013] Mean detx,y = (-1241.82, 9736.97) [Tue Jun 25 13:30:13 2013] ../../xmm0112370101/products/images/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112370101/products/images/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create [Tue Jun 25 13:30:13 2013] ../../xmm0112370101/products/spectra/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112370101/products/spectra/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create [Tue Jun 25 13:30:13 2013] Setting source spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue Jun 25 13:30:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Tue Jun 25 13:30:13 2013] ../../xmm0112370101/products/lightcurves/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112370101/products/lightcurves/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create [Tue Jun 25 15:05:37 2013] Updating aperture counts using extracted products [Tue Jun 25 15:05:37 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 381.00 [Tue Jun 25 15:05:37 2013] Total counts from fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 357.00 [Tue Jun 25 15:05:38 2013] Got source and background scale factors 364800.000000, 2691200.000000 [Tue Jun 25 15:05:38 2013] User source parameters: Position = (175.5, 332.6) = 2 18 30.60 -4 56 23.4 Extent = 5.7 (5.2-6.2)", rotation angle = 0 Source aperture counts = 332.6 +/- 20.5 Background aperture counts = 48.4 Rate = 0.007 +/- 0.0004 [Tue Jun 25 15:05:43 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 25 15:05:43 2013] Using photon index=1.80, rate=0.00635, arf fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3.arf [Tue Jun 25 15:05:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 25 15:05:43 2013] Updating source flux to 1e-13 [Tue Jun 25 15:05:59 2013] xmm0112370101/analysis//spectral/fullrun_mos1_xmm0112370101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete