[Sat Jun 16 07:22:30 2012] Detection parameters:
  Position = (213.0, 213.0) = 21 25 7.94 -34 3 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7467.3 +/- 106.4
  Background counts = 60.3
  Rate = 0.2 +/- 0.003

[Sat Jun 16 07:22:31 2012] Off-axis axis estimate = 8.76'
[Sat Jun 16 07:57:41 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 07:57:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 07:57:41 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Sat Jun 16 07:57:41 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Sat Jun 16 07:57:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.81"
[Sat Jun 16 08:29:13 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 08:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 08:29:13 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 08:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 08:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 08:29:13 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 08:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 16 08:29:13 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 08:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 16 08:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112320601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 08:29:26 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.439983 pixels away
[Sat Jun 16 08:29:26 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 08:29:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 08:29:26 2012] Assessing source extent using major
[Sat Jun 16 08:29:26 2012] Source does appear to be extended
[Sat Jun 16 08:29:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 09:02:07 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 09:02:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 09:02:07 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Sat Jun 16 09:02:07 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Sat Jun 16 09:02:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.81"
[Sat Jun 16 09:35:53 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 09:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 09:35:53 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 09:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 09:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 09:35:53 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 09:35:53 2012] fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 09:35:53 2012] Fit fullrun_mos2_xmm0112320601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 09:36:02 2012] Spatial fit model total counts = 7345.330000, observed total counts = 7053.000000
[Sat Jun 16 09:36:02 2012] Offset between fit and detection position for source 2 = 0.113781 pixels
[Sat Jun 16 09:36:02 2012] 7440.080000 total counts/ 2169.560000 bgd. counts: snr = 113.153407
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.113781 pixels
  Position = (213.1, 213.1) = 21 25 7.94 -34 3 45.9
  Extent = 6.6 (6.5-6.8)", rotation angle = 0
  Source counts = 5270.5 +/- 86.3
  Background counts = 2169.6
  Rate = 0.08 +/- 0.001
[Sat Jun 16 09:36:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 09:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 09:36:02 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 09:36:02 2012] Source does appear to be extended
[Sat Jun 16 09:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 10:22:49 2012] Counts = 5270.520000, rescaling region sizes by 2.000000
[Sat Jun 16 10:22:49 2012] XMMSAS src. selection expression = ellipse(18486.944800, 18495.522600, 796.790423, 796.790423, 0.000000, X, Y)
[Sat Jun 16 10:22:49 2012] Writing source region out to fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 16 10:22:49 2012] Extracting stamp from image fullrun_mos2_xmm0112320601_pi300-10000_cl_sm2.00.img.gz, (167, 167) - (259, 259)
[Sat Jun 16 10:22:49 2012] XMMSAS bgd. selection expression = annulus(18486.944800, 18495.522600, 2655.968076, 5311.936153, X, Y) && !ellipse(16312.026825, 13534.025864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16579.058600, 15312.187500, 594.813617, 237.094407, 31.755413, X, Y) && !ellipse(12827.825241, 24289.872131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20668.495804, 13858.532837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20564.099280, 21097.380200, 599.189617, 279.676008, 2.874219, X, Y) && !ellipse(14321.710663, 19995.700760, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 16 10:22:49 2012] Writing fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2.gif
[Sat Jun 16 10:23:01 2012] Mean detx,y = (-4288.02, 7320.28) 
[Sat Jun 16 10:23:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 10:24:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 10:24:14 2012] Setting source spectrum file to fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 10:24:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 16 11:15:49 2012] Updating aperture counts using extracted products
[Sat Jun 16 11:15:49 2012] Error reading totcts from fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 11:15:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 11:15:51 2012] Using photon index=1.80, rate=0.0819, arf fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2.arf
[Sat Jun 16 11:15:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 11:15:51 2012] Updating source flux to 1.4e-12
[Sat Jun 16 11:18:20 2012] Reading fit data from xmm0112320601/analysis//spectral/fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jun 16 11:18:20 2012] Spectral fit parameter nH value = 1.51962e+20
[Sat Jun 16 11:18:20 2012] Spectral fit parameter PhoIndex value = 1.75349
[Sat Jun 16 11:18:20 2012] Failed to get F(0.3-8.0) from xmm0112320601/analysis//spectral/fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 11:18:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 11:18:20 2012] Using Nh = 1.5e+20, photon index=1.75, rate=0.0819, arf fullrun_mos2_xmm0112320601_pi300-10000_pass1_cl_src2.arf
[Sat Jun 16 11:18:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 11:18:20 2012] Updating source flux to 1.5e-12