[Wed Jun 13 20:31:29 2012] Detection parameters:
  Position = (266.2, 327.8) = 10 24 48.14 -7 15 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.9 +/- 14.6
  Background counts = 16.6
  Rate = 0.002 +/- 0.0003

[Wed Jun 13 20:31:30 2012] Off-axis axis estimate = 3.16'
[Wed Jun 13 20:32:49 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 20:32:49 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Wed Jun 13 20:32:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.140
[Wed Jun 13 20:32:49 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.01"
[Wed Jun 13 21:32:18 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jun 13 21:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_src27.csv
[Wed Jun 13 21:32:18 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jun 13 21:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_src27.csv
[Wed Jun 13 21:32:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:32:19 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jun 13 21:32:19 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jun 13 21:32:19 2012] Fit fullrun_mos1_xmm0112320301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jun 13 22:26:15 2012] Spatial fit model total counts = 249.544000, observed total counts = 248.000000
[Wed Jun 13 22:26:15 2012] Offset between fit and detection position for source 27 = 0.136813 pixels
[Wed Jun 13 22:26:15 2012] 248.014500 total counts/ 173.486000 bgd. counts: snr = 5.658355
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.136813 pixels
  Position = (266.0, 327.8) = 10 24 48.18 -7 15 29.0
  Extent = 3.8 (3.0-4.8)", rotation angle = 0
  Source counts = 74.5 +/- 15.7
  Background counts = 173.5
  Rate = 0.001 +/- 0.0002
[Wed Jun 13 22:26:15 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 22:26:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 22:26:15 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 22:26:15 2012] Source does appear to be extended
[Wed Jun 13 22:26:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 22:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 22:26:33 2012] Initial guess for spatial extent in simple fitting = 3.82"
[Wed Jun 13 22:26:33 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.790
[Wed Jun 13 22:26:33 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 3.82"
[Wed Jun 13 23:15:13 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 13 23:15:13 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 13 23:15:13 2012] Fit fullrun_mos1_xmm0112320301_pi300-10000_cl_pass1_src27 appears to have run properly
[Wed Jun 13 23:15:14 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 13 23:15:14 2012] fullrun_mos1_xmm0112320301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 13 23:15:14 2012] Fit fullrun_mos1_xmm0112320301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jun 14 00:09:21 2012] Spatial fit model total counts = 249.549000, observed total counts = 248.000000
[Thu Jun 14 00:09:21 2012] Offset between fit and detection position for source 27 = 0.001421 pixels
[Thu Jun 14 00:09:21 2012] 248.019200 total counts/ 173.645000 bgd. counts: snr = 5.644054
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.001421 pixels
  Position = (266.0, 327.8) = 10 24 48.18 -7 15 29.0
  Extent = 3.8 (3.0-4.7)", rotation angle = 0
  Source counts = 74.4 +/- 15.7
  Background counts = 173.6
  Rate = 0.001 +/- 0.0002
[Thu Jun 14 00:09:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 00:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 00:09:21 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 00:09:21 2012] Source does appear to be extended
[Thu Jun 14 00:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 00:09:40 2012] XMMSAS src. selection expression = ellipse(23096.753340, 28468.900400, 228.059407, 228.059407, 0.000000, X, Y)
[Thu Jun 14 00:09:40 2012] Writing source region out to fullrun_mos1_xmm0112320301_pi300-10000_pass1_cl_src27_src.reg
[Thu Jun 14 00:09:40 2012] Extracting stamp from image fullrun_mos1_xmm0112320301_pi300-10000_cl_sm2.00.img.gz, (253, 315) - (279, 341)
[Thu Jun 14 00:09:40 2012] XMMSAS bgd. selection expression = annulus(23096.753340, 28468.900400, 380.099011, 760.198022, X, Y)
[Thu Jun 14 00:09:40 2012] Writing fullrun_mos1_xmm0112320301_pi300-10000_pass1_cl_src27.gif
[Thu Jun 14 00:15:54 2012] Mean detx,y = (-5056.89, -311.00) 
[Thu Jun 14 00:15:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 00:15:59 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 00:15:59 2012] Setting source spectrum file to fullrun_mos1_xmm0112320301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 00:15:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112320301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jun 14 00:53:45 2012] Not generating rmf since there are only 74 counts
[Thu Jun 14 00:53:45 2012] rmf not generated due to insufficient counts
[Thu Jun 14 01:44:21 2012] Updating aperture counts using extracted products
[Thu Jun 14 01:44:21 2012] Error reading totcts from fullrun_mos1_xmm0112320301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 01:44:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 01:44:22 2012] Using photon index=1.80, rate=0.00108, arf fullrun_mos1_xmm0112320301_pi300-10000_pass1_cl_src27.arf
[Thu Jun 14 01:44:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 01:44:22 2012] Updating source flux to 1.8e-14
[Thu Jun 14 01:44:25 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting