[Sat Jun  2 23:27:06 2012] Detection parameters:
  Position = (259.5, 255.3) = 4 37 35.13 -47 16 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 520.3 +/- 30.6
  Background counts = 31.6
  Rate = 0.01 +/- 0.0006

[Sat Jun  2 23:27:07 2012] Off-axis axis estimate = 4.22'
[Sat Jun  2 23:28:52 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 23:28:52 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Sat Jun  2 23:28:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.783
[Sat Jun  2 23:28:52 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.54"
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src5.csv
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src5.csv
[Sun Jun  3 00:26:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun  3 00:26:18 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun  3 01:43:26 2012] Spatial fit model total counts = 588.730000, observed total counts = 627.000000
[Sun Jun  3 01:43:26 2012] Offset between fit and detection position for source 5 = 0.760091 pixels
[Sun Jun  3 01:43:26 2012] 591.618000 total counts/ 327.773000 bgd. counts: snr = 14.573447
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.760091 pixels
  Position = (259.0, 254.7) = 4 37 35.34 -47 16 36.3
  Extent = 5.7 (4.7-6.8)", rotation angle = 0
  Source counts = 263.8 +/- 24.3
  Background counts = 327.8
  Rate = 0.004 +/- 0.0004
[Sun Jun  3 01:43:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:43:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:43:26 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 01:43:26 2012] Source does appear to be extended
[Sun Jun  3 01:43:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 01:43:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:43:43 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Sun Jun  3 01:43:43 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.906
[Sun Jun  3 01:43:43 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.74"
[Sun Jun  3 02:23:06 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun  3 02:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src5.csv
[Sun Jun  3 02:23:06 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun  3 02:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src5.csv
[Sun Jun  3 02:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 02:23:07 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun  3 02:23:07 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun  3 02:23:07 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun  3 03:14:00 2012] Spatial fit model total counts = 598.321000, observed total counts = 636.000000
[Sun Jun  3 03:14:00 2012] Offset between fit and detection position for source 5 = 0.032186 pixels
[Sun Jun  3 03:14:00 2012] 601.850000 total counts/ 348.594000 bgd. counts: snr = 13.564375
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.032186 pixels
  Position = (259.0, 254.7) = 4 37 35.34 -47 16 36.2
  Extent = 5.5 (4.5-6.6)", rotation angle = 0
  Source counts = 253.3 +/- 24.5
  Background counts = 348.6
  Rate = 0.004 +/- 0.0004
[Sun Jun  3 03:14:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 03:14:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 03:14:00 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 03:14:00 2012] Source does appear to be extended
[Sun Jun  3 03:14:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 03:14:15 2012] XMMSAS src. selection expression = ellipse(22483.279680, 22112.626800, 328.348809, 328.348809, 0.000000, X, Y)
[Sun Jun  3 03:14:15 2012] Writing source region out to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun  3 03:14:15 2012] Extracting stamp from image fullrun_mos1_xmm0112320201_pi300-10000_cl_sm2.00.img.gz, (240, 236) - (278, 274)
[Sun Jun  3 03:14:15 2012] XMMSAS bgd. selection expression = annulus(22483.279680, 22112.626800, 547.248016, 1094.496031, X, Y)
[Sun Jun  3 03:14:15 2012] Writing fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src5.gif
[Sun Jun  3 03:17:31 2012] Mean detx,y = (-1468.64, 3752.52) 
[Sun Jun  3 03:17:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 03:17:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 03:17:42 2012] Setting source spectrum file to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun  3 03:17:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun  3 05:01:04 2012] Updating aperture counts using extracted products
[Sun Jun  3 05:01:04 2012] Error reading totcts from fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun  3 05:01:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 05:01:04 2012] Using photon index=1.80, rate=0.00371, arf fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src5.arf
[Sun Jun  3 05:01:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 05:01:04 2012] Updating source flux to 5.2e-14