[Sat Jun  2 23:27:06 2012] Detection parameters:
  Position = (404.2, 225.7) = 4 36 33.25 -47 18 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.8 +/- 13.1
  Background counts = 24.3
  Rate = 0.001 +/- 0.0002

[Sat Jun  2 23:27:07 2012] Off-axis axis estimate = 9.31'
[Sat Jun  2 23:28:52 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 23:28:52 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Sat Jun  2 23:28:52 2012] source mask rpix=2.5, npix_max = 37, mask sum = 28, frac = 0.754
[Sat Jun  2 23:28:52 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 11.08"
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src39.csv
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src39.csv
[Sun Jun  3 00:26:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 00:26:19 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun  3 00:26:19 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun  3 00:26:19 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Jun  3 01:43:26 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 10.581183 pixels away
[Sun Jun  3 01:43:26 2012] Spatial fit model total counts = 300.135000, observed total counts = 302.000000
[Sun Jun  3 01:43:26 2012] Offset between fit and detection position for source 39 = 1.105950 pixels
[Sun Jun  3 01:43:26 2012] 297.317300 total counts/ 281.171000 bgd. counts: snr = 0.962915
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.105950 pixels
  Position = (404.1, 226.8) = 4 36 33.30 -47 18 37.4
  Extent = 2.8 (2.8-3.7)", rotation angle = 0
  Source counts = 16.1 +/- 17.2
  Background counts = 281.2
  Rate = 0.0002 +/- 0.0003
  Deleting source due to low Poisson probability