[Sat Jun  2 23:27:06 2012] Detection parameters:
  Position = (276.0, 325.2) = 4 37 28.04 -47 11 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69479.2 +/- 316.5
  Background counts = 38.2
  Rate = 1 +/- 0.006

[Sat Jun  2 23:27:07 2012] Off-axis axis estimate = 2.53'
[Sat Jun  2 23:28:52 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 23:28:52 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Sat Jun  2 23:28:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Sat Jun  2 23:28:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.69"
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src3.csv
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src3.csv
[Sun Jun  3 00:26:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  3 00:26:18 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun  3 01:43:26 2012] Spatial fit model total counts = 61887.700000, observed total counts = 61845.000000
[Sun Jun  3 01:43:26 2012] Offset between fit and detection position for source 3 = 0.226675 pixels
[Sun Jun  3 01:43:26 2012] 61844.700000 total counts/ 11890.500000 bgd. counts: snr = 458.112297
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.226675 pixels
  Position = (275.9, 325.4) = 4 37 28.11 -47 11 28.9
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 49954.2 +/- 248.7
  Background counts = 11890.5
  Rate = 0.7 +/- 0.004
[Sun Jun  3 01:43:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:43:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:43:26 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 01:43:26 2012] Source does appear to be extended
[Sun Jun  3 01:43:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 01:43:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:43:43 2012] Initial guess for spatial extent in simple fitting = 5.77"
[Sun Jun  3 01:43:43 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.900
[Sun Jun  3 01:43:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.77"
[Sun Jun  3 02:23:06 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  3 02:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src3.csv
[Sun Jun  3 02:23:06 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  3 02:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src3.csv
[Sun Jun  3 02:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 02:23:07 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  3 02:23:07 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  3 02:23:07 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun  3 03:14:00 2012] Spatial fit model total counts = 61654.600000, observed total counts = 61664.000000
[Sun Jun  3 03:14:00 2012] Offset between fit and detection position for source 3 = 0.012126 pixels
[Sun Jun  3 03:14:00 2012] 61782.900000 total counts/ 12131.700000 bgd. counts: snr = 450.784441
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012126 pixels
  Position = (275.9, 325.4) = 4 37 28.12 -47 11 28.9
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 49651.2 +/- 248.6
  Background counts = 12131.7
  Rate = 0.7 +/- 0.004
[Sun Jun  3 03:14:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 03:14:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 03:14:00 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 03:14:00 2012] Source does appear to be extended
[Sun Jun  3 03:14:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 03:14:14 2012] Counts = 49651.200000, rescaling region sizes by 3.000000
[Sun Jun  3 03:14:14 2012] XMMSAS src. selection expression = ellipse(23950.638000, 28258.870800, 1030.725030, 1030.725030, 0.000000, X, Y)
[Sun Jun  3 03:14:14 2012] Writing source region out to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  3 03:14:14 2012] Extracting stamp from image fullrun_mos1_xmm0112320201_pi300-10000_cl_sm2.00.img.gz, (217, 266) - (335, 385)
[Sun Jun  3 03:14:14 2012] XMMSAS bgd. selection expression = annulus(23950.638000, 28258.870800, 5153.625148, 10307.250297, X, Y) && !ellipse(26456.800800, 23875.273600, 425.061612, 425.061612, 0.000000, X, Y) && !ellipse(15443.022461, 28576.921387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22483.279680, 22112.626800, 437.798413, 437.798413, 0.000000, X, Y) && !ellipse(15639.571625, 29356.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.701904, 33326.110352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13449.314499, 27948.722870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.057373, 26936.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.684740, 25727.657400, 415.218412, 206.340806, 46.534000, X, Y) && !ellipse(22725.101410, 24293.650238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18139.206000, 17415.267200, 948.074155, 948.074155, 0.000000, X, Y) && !ellipse(22801.778656, 29018.107605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.398743, 27184.130188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29602.838160, 26185.011800, 259.133607, 259.133607, 0.000000, X, Y) && !ellipse(33933.482819, 25490.160431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23394.919200, 25216.237000, 856.792025, 856.792025, 0.000000, X, Y) && !ellipse(35106.445557, 20754.781601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33118.245453, 19902.934036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31714.800820, 19978.319620, 441.136013, 441.136013, 0.000000, X, Y) && !ellipse(27794.101929, 38601.738525, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 03:14:14 2012] Writing fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src3.gif
[Sun Jun  3 03:15:20 2012] Mean detx,y = (-4421.38, -1827.65) 
[Sun Jun  3 03:15:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 03:17:09 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 03:17:09 2012] Setting source spectrum file to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 03:17:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  3 05:01:04 2012] Updating aperture counts using extracted products
[Sun Jun  3 05:01:04 2012] Error reading totcts from fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 05:01:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 05:01:04 2012] Using photon index=1.80, rate=0.728, arf fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 05:01:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 05:01:04 2012] Updating source flux to 7.7e-12