[Sat Jun  2 23:27:06 2012] Detection parameters:
  Position = (261.8, 279.8) = 4 37 34.14 -47 14 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.3 +/- 23.7
  Background counts = 36.1
  Rate = 0.005 +/- 0.0004

[Sat Jun  2 23:27:07 2012] Off-axis axis estimate = 2.98'
[Sat Jun  2 23:28:52 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 23:28:52 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sat Jun  2 23:28:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.161
[Sat Jun  2 23:28:52 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.92"
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src13.csv
[Sun Jun  3 00:26:18 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun  3 00:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src13.csv
[Sun Jun  3 00:26:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 00:26:19 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun  3 00:26:19 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun  3 00:26:19 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Jun  3 01:43:26 2012] Warning, spatial fit 13 centroid is now closest to src. 28
[Sun Jun  3 01:43:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 01:43:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 01:43:26 2012] Assessing source extent using major
[Sun Jun  3 01:43:26 2012] Source does appear to be extended
[Sun Jun  3 01:43:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 01:43:43 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 01:43:43 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sun Jun  3 01:43:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.161
[Sun Jun  3 01:43:43 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.92"
[Sun Jun  3 02:23:06 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun  3 02:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src13.csv
[Sun Jun  3 02:23:06 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun  3 02:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src13.csv
[Sun Jun  3 02:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 02:23:07 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun  3 02:23:07 2012] fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun  3 02:23:07 2012] Fit fullrun_mos1_xmm0112320201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Jun  3 03:14:00 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.197614 pixels away
[Sun Jun  3 03:14:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 03:14:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 03:14:00 2012] Assessing source extent using major
[Sun Jun  3 03:14:00 2012] Source does appear to be extended
[Sun Jun  3 03:14:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 03:14:15 2012] XMMSAS src. selection expression = ellipse(22725.101410, 24293.650238, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  3 03:14:15 2012] Writing source region out to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun  3 03:14:15 2012] Extracting stamp from image fullrun_mos1_xmm0112320201_pi300-10000_cl_sm2.00.img.gz, (224, 242) - (299, 317)
[Sun Jun  3 03:14:15 2012] XMMSAS bgd. selection expression = annulus(22725.101410, 24293.650238, 1087.500000, 2175.000000, X, Y) && !ellipse(22483.279680, 22112.626800, 437.798413, 437.798413, 0.000000, X, Y) && !ellipse(23961.057373, 26936.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.398743, 27184.130188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23394.919200, 25216.237000, 856.792025, 856.792025, 0.000000, X, Y)
[Sun Jun  3 03:14:15 2012] Writing fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src13.gif
[Sun Jun  3 03:20:03 2012] Mean detx,y = (-2745.60, 1978.59) 
[Sun Jun  3 03:20:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 03:20:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 03:20:14 2012] Setting source spectrum file to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun  3 03:20:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun  3 03:45:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  3 03:45:39 2012] rmf not generated due to insufficient counts
[Sun Jun  3 05:01:04 2012] Updating aperture counts using extracted products
[Sun Jun  3 05:01:04 2012] Error reading totcts from fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun  3 05:01:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 05:01:04 2012] Using photon index=1.80, rate=0.00513, arf fullrun_mos1_xmm0112320201_pi300-10000_pass1_cl_src13.arf
[Sun Jun  3 05:01:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 05:01:04 2012] Updating source flux to 5.2e-14
[Sun Jun  3 05:01:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting