[Tue Mar 13 12:08:30 2012] Detection parameters:
  Position = (280.8, 295.9) = 23 18 22.00 -42 21 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.2 +/- 13.7
  Background counts = 9.1
  Rate = 0.004 +/- 0.0006

[Tue Mar 13 12:08:31 2012] Off-axis axis estimate = 1.29'
[Tue Mar 13 12:09:14 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:09:14 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Tue Mar 13 12:09:14 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Tue Mar 13 12:09:14 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.08"
[Tue Mar 13 12:09:15 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Mar 13 12:09:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_src10.csv
[Tue Mar 13 12:09:15 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Mar 13 12:09:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_src10.csv
[Tue Mar 13 12:09:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:09:18 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar 13 12:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Mar 13 12:09:18 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar 13 12:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Mar 13 12:09:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112310201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:09:52 2012] Spatial fit model total counts = 387.628000, observed total counts = 740.000000
[Tue Mar 13 12:09:52 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 13 12:09:52 2012] Spatial fit model total counts = 213.446000, observed total counts = 213.000000
[Tue Mar 13 12:09:52 2012] Offset between fit and detection position for source 25 = 3.109893 pixels
[Tue Mar 13 12:09:52 2012] Warning, changing simple spatial fit ID from 10 to 32
[Tue Mar 13 12:09:52 2012] 213.396500 total counts/ 116.029000 bgd. counts: snr = 9.039216
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.109893 pixels
  Position = (282.1, 298.7) = 23 18 21.47 -42 21 20.4
  Extent = 13.7 (13.7-27.5)", rotation angle = 0
  Source counts = 97.4 +/- 14.6
  Background counts = 116.0
  Rate = 0.004 +/- 0.0006
[Tue Mar 13 12:09:52 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:09:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:09:52 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:09:52 2012] Source does appear to be extended
[Tue Mar 13 12:09:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:09:52 2012] Source is confused with source 23
[Tue Mar 13 12:10:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:10:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 12:10:17 2012] Initial guess for spatial extent in simple fitting = 13.74"
[Tue Mar 13 12:10:17 2012] source mask rpix=3.2, npix_max = 53, mask sum = 52, frac = 0.971
[Tue Mar 13 12:10:17 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.74"
[Tue Mar 13 12:10:18 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Mar 13 12:10:18 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Mar 13 12:10:18 2012] Fit fullrun_mos2_xmm0112310201_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Mar 13 12:10:18 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Mar 13 12:10:18 2012] fullrun_mos2_xmm0112310201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Mar 13 12:10:18 2012] Fit fullrun_mos2_xmm0112310201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Mar 13 12:10:48 2012] Warning, spatial fit 10 centroid is now closest to src. 24
[Tue Mar 13 12:10:48 2012] Spatial fit model total counts = 211.746000, observed total counts = 213.000000
[Tue Mar 13 12:10:48 2012] Offset between fit and detection position for source 25 = 0.196863 pixels
[Tue Mar 13 12:10:48 2012] Warning, changing simple spatial fit ID from 10 to 29
[Tue Mar 13 12:10:48 2012] 208.885800 total counts/ 130.147000 bgd. counts: snr = 6.901948
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.196863 pixels
  Position = (282.0, 298.8) = 23 18 21.54 -42 21 20.0
  Extent = 13.7 (13.7-27.5)" x 8.0 (4.1-12.3)", rotation angle = 323 (218-88) degrees
  Source counts = 78.7 +/- 14.5
  Background counts = 130.1
  Rate = 0.003 +/- 0.0006
[Tue Mar 13 12:10:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:10:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:10:48 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:10:48 2012] Source does appear to be extended
[Tue Mar 13 12:10:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Tue Mar 13 12:11:25 2012] XMMSAS src. selection expression = ellipse(24481.904000, 25944.622000, 824.490024, 481.509014, 323.331000, X, Y)
[Tue Mar 13 12:11:25 2012] Not overwriting source region fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src.reg
[Tue Mar 13 12:11:25 2012] Extracting stamp from image fullrun_mos2_xmm0112310201_pi300-10000_cl_sm2.00.img.gz, (235, 251) - (329, 346)
[Tue Mar 13 12:11:25 2012] XMMSAS bgd. selection expression = annulus(24481.904000, 25944.622000, 1374.150040, 2748.300079, X, Y) && !ellipse(24043.892500, 24887.205600, 508.902415, 508.902415, 0.000000, X, Y) && !ellipse(22608.763000, 26726.953800, 472.616014, 314.341609, 33.471920, X, Y) && !ellipse(24078.436000, 25052.594000, 784.000823, 784.000823, 0.000000, X, Y) && !ellipse(24981.626740, 26419.688843, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 12:11:25 2012] Writing fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25.gif
[Tue Mar 13 12:11:26 2012] ../../xmm0112310201/products/events/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0112310201/products/events/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue Mar 13 12:11:26 2012] Mean detx,y = (-30.00, -959.67) 
[Tue Mar 13 12:11:26 2012] ../../xmm0112310201/products/images/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src.img and ../../xmm0112310201/products/images/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue Mar 13 12:11:26 2012] ../../xmm0112310201/products/spectra/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0112310201/products/spectra/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Tue Mar 13 12:11:26 2012] Setting source spectrum file to fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Mar 13 12:11:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Mar 13 12:11:26 2012] ../../xmm0112310201/products/lightcurves/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0112310201/products/lightcurves/fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue Mar 13 12:11:36 2012] Not generating rmf since there are only 78 counts
[Tue Mar 13 12:11:36 2012] rmf not generated due to insufficient counts
[Tue Mar 13 12:11:36 2012] fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Tue Mar 13 12:12:18 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:12:18 2012] Error reading totcts from fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Mar 13 12:12:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:12:20 2012] Using photon index=1.80, rate=0.00348, arf fullrun_mos2_xmm0112310201_pi300-10000_pass1_cl_src25.arf
[Tue Mar 13 12:12:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:12:20 2012] Updating source flux to 4.2e-14
[Tue Mar 13 12:12:26 2012] Flag p found in src. 25 procflags, skipping spectral fitting
[Tue Mar 13 12:12:26 2012] Flag c found in src. 25 procflags, skipping spectral fitting
[Tue Mar 13 12:12:26 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting