[Tue Jun 18 02:41:00 2013] Detection parameters:
  Position = (291.7, 275.9) = 12 10 32.80 39 24 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59686.8 +/- 284.2
  Background counts = 8.7
  Rate = 2 +/- 0.01

[Tue Jun 18 02:41:04 2013] Off-axis axis estimate = 1.71'
[Tue Jun 18 02:41:38 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:41:38 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jun 18 02:41:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Tue Jun 18 02:41:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jun 18 02:41:39 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 18 02:41:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 02:41:39 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 18 02:41:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 02:41:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:41:39 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 18 02:41:39 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 18 02:41:39 2013] Fit fullrun_mos2_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 18 02:42:06 2013] Spatial fit model total counts = 53711.500000, observed total counts = 52869.000000
[Tue Jun 18 02:42:06 2013] Offset between fit and detection position for source 1 = 0.090955 pixels
[Tue Jun 18 02:42:06 2013] 53877.800000 total counts/ 11431.100000 bgd. counts: snr = 397.008605
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.090955 pixels
  Position = (291.7, 275.8) = 12 10 32.79 39 24 21.3
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 42446.7 +/- 232.1
  Background counts = 11431.1
  Rate = 1 +/- 0.008
[Tue Jun 18 02:42:06 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:42:06 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:42:06 2013] Source does appear to be extended
[Tue Jun 18 02:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 02:42:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:42:19 2013] Initial guess for spatial extent in simple fitting = 5.43"
[Tue Jun 18 02:42:19 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.981
[Tue Jun 18 02:42:19 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Tue Jun 18 02:42:20 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 18 02:42:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 18 02:42:20 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 18 02:42:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 18 02:42:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:42:20 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 18 02:42:20 2013] fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 18 02:42:20 2013] Fit fullrun_mos2_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 18 02:42:35 2013] Spatial fit model total counts = 53708.600000, observed total counts = 52860.000000
[Tue Jun 18 02:42:35 2013] Offset between fit and detection position for source 1 = 0.013001 pixels
[Tue Jun 18 02:42:35 2013] 54107.000000 total counts/ 11637.600000 bgd. counts: snr = 393.680961
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013001 pixels
  Position = (291.7, 275.8) = 12 10 32.79 39 24 21.3
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 42469.4 +/- 232.6
  Background counts = 11637.6
  Rate = 1 +/- 0.008
[Tue Jun 18 02:42:35 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:42:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:42:35 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:42:35 2013] Source does appear to be extended
[Tue Jun 18 02:42:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 03:13:59 2013] Counts = 42469.400000, rescaling region sizes by 3.000000
[Tue Jun 18 03:13:59 2013] XMMSAS src. selection expression = ellipse(25328.518000, 23945.007820, 978.613228, 978.613228, 0.000000, X, Y)
[Tue Jun 18 03:13:59 2013] Not overwriting source region fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 18 03:13:59 2013] Extracting stamp from image fullrun_mos2_xmm0112310101_pi300-10000_cl_sm2.00.img.gz, (235, 220) - (348, 332)
[Tue Jun 18 03:13:59 2013] XMMSAS bgd. selection expression = annulus(25328.518000, 23945.007820, 4893.066141, 9786.132282, X, Y) && !ellipse(26175.157990, 16074.939346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29035.381226, 16669.120300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34579.281525, 32782.599304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.843000, 31058.332200, 832.359893, 832.359893, 0.000000, X, Y) && !ellipse(24322.770599, 23806.048798, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 03:13:59 2013] Writing fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 18 03:13:59 2013] ../../xmm0112310101/products/events/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112310101/products/events/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Jun 18 03:13:59 2013] Mean detx,y = (-86.50, -28.18) 
[Tue Jun 18 03:13:59 2013] ../../xmm0112310101/products/images/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112310101/products/images/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Jun 18 03:13:59 2013] ../../xmm0112310101/products/spectra/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112310101/products/spectra/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Jun 18 03:13:59 2013] Setting source spectrum file to fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 18 03:13:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 18 03:13:59 2013] ../../xmm0112310101/products/lightcurves/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112310101/products/lightcurves/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Jun 18 03:14:01 2013] fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Jun 18 03:14:01 2013] fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Jun 18 03:14:30 2013] Updating aperture counts using extracted products
[Tue Jun 18 03:14:30 2013] Total counts from fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 54857.00
[Tue Jun 18 03:14:30 2013] Total counts from fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 5111.00
[Tue Jun 18 03:14:30 2013] Got source and background scale factors 2739380.000000, 106180828.000000
[Tue Jun 18 03:14:30 2013] User source parameters:
  Position = (291.7, 275.8) = 12 10 32.79 39 24 21.3
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source aperture counts = 54725.1 +/- 235.2
  Background aperture counts = 131.9
  Rate = 2 +/- 0.008

[Tue Jun 18 03:14:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 03:14:32 2013] Using photon index=1.80, rate=1.41, arf fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 18 03:14:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 03:14:32 2013] Updating source flux to 1.5e-11
[Tue Jun 18 03:14:46 2013] xmm0112310101/analysis//spectral/fullrun_mos2_xmm0112310101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete