[Tue Jun 18 02:40:59 2013] Detection parameters:
  Position = (327.5, 202.3) = 12 10 19.37 39 19 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.0 +/- 8.3
  Background counts = 11.2
  Rate = 0.001 +/- 0.0004

[Tue Jun 18 02:41:00 2013] Off-axis axis estimate = 7.28'
[Tue Jun 18 02:41:36 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:41:36 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Tue Jun 18 02:41:36 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Tue Jun 18 02:41:36 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.07"
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jun 18 02:41:37 2013] Fit fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src28 appears to have run properly
[Tue Jun 18 02:41:38 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jun 18 02:41:38 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jun 18 02:41:38 2013] Fit fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Jun 18 02:41:55 2013] Spatial fit model total counts = 139.411000, observed total counts = 150.000000
[Tue Jun 18 02:41:55 2013] Offset between fit and detection position for source 34 = 2.937518 pixels
[Tue Jun 18 02:41:55 2013] 134.853700 total counts/ 9.011700 bgd. counts: snr = 41.920094
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.937518 pixels
  Position = (324.6, 202.9) = 12 10 20.44 39 19 4.2
  Extent = 17.1 (11.3-20.1)", rotation angle = 0
  Source counts = 125.8 +/- 11.6
  Background counts = 9.0
  Rate = 0.004 +/- 0.0004
[Tue Jun 18 02:41:55 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:41:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:41:55 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:41:55 2013] Source does appear to be extended
[Tue Jun 18 02:41:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 02:42:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:42:18 2013] Initial guess for spatial extent in simple fitting = 17.09"
[Tue Jun 18 02:42:18 2013] source mask rpix=3.9, npix_max = 78, mask sum = 80, frac = 1.020
[Tue Jun 18 02:42:18 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 17.09"
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 18 02:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src15.csv
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 18 02:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src15.csv
[Tue Jun 18 02:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 18 02:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 18 02:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Jun 18 02:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:42:29 2013] Warning, spatial fit 15 centroid is now closest to src. 24
[Tue Jun 18 02:42:29 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:42:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:42:29 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:42:29 2013] Source does appear to be extended
[Tue Jun 18 02:42:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 02:42:49 2013] XMMSAS src. selection expression = ellipse(28194.046000, 17603.292780, 1025.316030, 1025.316030, 0.000000, X, Y)
[Tue Jun 18 02:42:49 2013] Not overwriting source region fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34_src.reg
[Tue Jun 18 02:42:49 2013] Extracting stamp from image fullrun_mos1_xmm0112310101_pi300-10000_cl_sm2.00.img.gz, (266, 144) - (384, 262)
[Tue Jun 18 02:42:49 2013] XMMSAS bgd. selection expression = annulus(28194.046000, 17603.292780, 1708.860049, 3417.720098, X, Y) && !ellipse(26151.559280, 16071.731800, 419.903816, 419.903816, 0.000000, X, Y) && !ellipse(29000.706000, 16620.546000, 530.504815, 530.504815, 0.000000, X, Y)
[Tue Jun 18 02:42:49 2013] Writing fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34.gif
[Tue Jun 18 02:46:53 2013] Mean detx,y = (7362.44, -317.23) 
[Tue Jun 18 02:46:56 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 02:47:43 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 02:47:43 2013] Setting source spectrum file to fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jun 18 02:47:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Jun 18 03:14:29 2013] Updating aperture counts using extracted products
[Tue Jun 18 03:14:29 2013] Total counts from fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 206.00
[Tue Jun 18 03:14:30 2013] Total counts from fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 693.00
[Tue Jun 18 03:14:30 2013] Got source and background scale factors 2585252.000000, 13998290.000000
[Tue Jun 18 03:14:30 2013] User source parameters:
  Position = (324.6, 202.9) = 12 10 20.44 39 19 4.2
  Extent = 17.1 (11.3-20.1)", rotation angle = 0
  Source aperture counts = 78.0 +/- 15.4
  Background aperture counts = 128.0
  Rate = 0.003 +/- 0.0005

[Tue Jun 18 03:14:30 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 03:14:30 2013] Using photon index=1.80, rate=0.00417, arf fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34.arf
[Tue Jun 18 03:14:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 03:14:30 2013] Updating source flux to 5.6e-14
[Tue Jun 18 03:14:42 2013] xmm0112310101/analysis//spectral/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete