[Tue Jun 18 02:40:58 2013] Detection parameters:
  Position = (350.8, 358.1) = 12 10 10.57 39 30 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.2 +/- 10.2
  Background counts = 9.2
  Rate = 0.003 +/- 0.0006

[Tue Jun 18 02:41:00 2013] Off-axis axis estimate = 5.75'
[Tue Jun 18 02:41:36 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:41:36 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Tue Jun 18 02:41:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.077
[Tue Jun 18 02:41:36 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.31"
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jun 18 02:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src8.csv
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jun 18 02:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src8.csv
[Tue Jun 18 02:41:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jun 18 02:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jun 18 02:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 18 02:41:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:41:55 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.911620 pixels away
[Tue Jun 18 02:41:55 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:41:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:41:55 2013] Assessing source extent using major
[Tue Jun 18 02:41:55 2013] Source does appear to be extended
[Tue Jun 18 02:41:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 02:42:18 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:42:18 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Tue Jun 18 02:42:18 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.077
[Tue Jun 18 02:42:18 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.31"
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jun 18 02:42:19 2013] Fit fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src8 appears to have run properly
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jun 18 02:42:19 2013] Fit fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jun 18 02:42:29 2013] Spatial fit model total counts = 171.274000, observed total counts = 165.000000
[Tue Jun 18 02:42:29 2013] Offset between fit and detection position for source 14 = 2.333544 pixels
[Tue Jun 18 02:42:29 2013] 169.013000 total counts/ 83.080000 bgd. counts: snr = 9.427830
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.333544 pixels
  Position = (353.1, 357.7) = 12 10 9.70 39 30 17.6
  Extent = 16.4 (11.8-18.6)" x 6.3 (4.2-8.4)", rotation angle = 5 (356-19) degrees
  Source counts = 85.9 +/- 13.0
  Background counts = 83.1
  Rate = 0.003 +/- 0.0004
[Tue Jun 18 02:42:29 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:42:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:42:29 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:42:29 2013] Source does appear to be extended
[Tue Jun 18 02:42:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.41
[Tue Jun 18 02:42:49 2013] XMMSAS src. selection expression = ellipse(30673.851200, 31073.055800, 982.620028, 375.173411, 5.242609, X, Y)
[Tue Jun 18 02:42:49 2013] Not overwriting source region fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14_src.reg
[Tue Jun 18 02:42:49 2013] Extracting stamp from image fullrun_mos1_xmm0112310101_pi300-10000_cl_sm2.00.img.gz, (297, 301) - (410, 414)
[Tue Jun 18 02:42:49 2013] XMMSAS bgd. selection expression = annulus(30673.851200, 31073.055800, 1637.700047, 3275.400094, X, Y) && !ellipse(34596.910919, 32773.864258, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 02:42:49 2013] Writing fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14.gif
[Tue Jun 18 02:44:11 2013] Mean detx,y = (-4353.91, -7700.71) 
[Tue Jun 18 02:44:13 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 02:44:36 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 02:44:37 2013] Setting source spectrum file to fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 18 02:44:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 18 03:04:43 2013] Not generating rmf since there are only 85 counts
[Tue Jun 18 03:04:43 2013] rmf not generated due to insufficient counts
[Tue Jun 18 03:14:28 2013] Updating aperture counts using extracted products
[Tue Jun 18 03:14:28 2013] Total counts from fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 129.00
[Tue Jun 18 03:14:28 2013] Total counts from fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 648.00
[Tue Jun 18 03:14:28 2013] Got source and background scale factors 1144266.000000, 15961992.000000
[Tue Jun 18 03:14:28 2013] User source parameters:
  Position = (353.1, 357.7) = 12 10 9.70 39 30 17.6
  Extent = 16.4 (11.8-18.6)" x 6.3 (4.2-8.4)", rotation angle = 5 (356-19) degrees
  Source aperture counts = 82.5 +/- 12.4
  Background aperture counts = 46.5
  Rate = 0.003 +/- 0.0004

[Tue Jun 18 03:14:30 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 03:14:30 2013] Using photon index=1.80, rate=0.00285, arf fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14.arf
[Tue Jun 18 03:14:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 03:14:30 2013] Updating source flux to 5.4e-14
[Tue Jun 18 03:14:35 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 18 03:14:42 2013] xmm0112310101/analysis//spectral/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete