[Tue Jun 18 02:40:56 2013] Detection parameters:
  Position = (291.7, 275.9) = 12 10 32.80 39 24 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60709.4 +/- 295.4
  Background counts = 8.2
  Rate = 2 +/- 0.01

[Tue Jun 18 02:41:00 2013] Off-axis axis estimate = 1.71'
[Tue Jun 18 02:41:36 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:41:36 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jun 18 02:41:36 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Tue Jun 18 02:41:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 18 02:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 18 02:41:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 02:41:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 18 02:41:37 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 18 02:41:37 2013] Fit fullrun_mos1_xmm0112310101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 18 02:41:55 2013] Spatial fit model total counts = 53392.900000, observed total counts = 53393.000000
[Tue Jun 18 02:41:55 2013] Offset between fit and detection position for source 1 = 0.083110 pixels
[Tue Jun 18 02:41:55 2013] 53461.100000 total counts/ 11288.500000 bgd. counts: snr = 396.928477
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.083110 pixels
  Position = (291.6, 275.8) = 12 10 32.81 39 24 21.4
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 42172.6 +/- 231.2
  Background counts = 11288.5
  Rate = 1 +/- 0.008
[Tue Jun 18 02:41:55 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:41:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:41:55 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:41:55 2013] Source does appear to be extended
[Tue Jun 18 02:41:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 02:42:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 02:42:18 2013] Initial guess for spatial extent in simple fitting = 5.52"
[Tue Jun 18 02:42:18 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.959
[Tue Jun 18 02:42:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.52"
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 18 02:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 18 02:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 18 02:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 18 02:42:19 2013] fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 18 02:42:19 2013] Fit fullrun_mos1_xmm0112310101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 18 02:42:29 2013] Spatial fit model total counts = 53492.100000, observed total counts = 53443.000000
[Tue Jun 18 02:42:29 2013] Offset between fit and detection position for source 1 = 0.011892 pixels
[Tue Jun 18 02:42:29 2013] 53771.900000 total counts/ 11545.500000 bgd. counts: snr = 392.986548
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011892 pixels
  Position = (291.6, 275.8) = 12 10 32.81 39 24 21.3
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 42226.4 +/- 231.9
  Background counts = 11545.5
  Rate = 1 +/- 0.008
[Tue Jun 18 02:42:29 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 02:42:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 02:42:29 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 02:42:29 2013] Source does appear to be extended
[Tue Jun 18 02:42:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 02:42:49 2013] Counts = 42226.400000, rescaling region sizes by 3.000000
[Tue Jun 18 02:42:49 2013] XMMSAS src. selection expression = ellipse(25324.349200, 23945.720540, 994.914029, 994.914029, 0.000000, X, Y)
[Tue Jun 18 02:42:49 2013] Not overwriting source region fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 18 02:42:49 2013] Extracting stamp from image fullrun_mos1_xmm0112310101_pi300-10000_cl_sm2.00.img.gz, (234, 219) - (349, 333)
[Tue Jun 18 02:42:49 2013] XMMSAS bgd. selection expression = annulus(25324.349200, 23945.720540, 4974.570143, 9949.140286, X, Y) && !ellipse(26151.559280, 16071.731800, 419.903816, 419.903816, 0.000000, X, Y) && !ellipse(29000.706000, 16620.546000, 530.504815, 530.504815, 0.000000, X, Y) && !ellipse(22118.916040, 31223.770400, 524.473538, 524.473538, 0.000000, X, Y) && !ellipse(34596.910919, 32773.864258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.633057, 32400.144989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30673.851200, 31073.055800, 1310.160038, 500.231214, 5.242609, X, Y) && !ellipse(16706.282000, 34423.466000, 1543.376044, 1543.376044, 0.000000, X, Y) && !ellipse(28194.046000, 17603.292780, 1367.088039, 1367.088039, 0.000000, X, Y)
[Tue Jun 18 02:42:49 2013] Writing fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 18 02:42:49 2013] ../../xmm0112310101/products/events/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112310101/products/events/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Jun 18 02:42:49 2013] Mean detx,y = (187.18, -67.25) 
[Tue Jun 18 02:42:49 2013] ../../xmm0112310101/products/images/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112310101/products/images/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Jun 18 02:42:49 2013] ../../xmm0112310101/products/spectra/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112310101/products/spectra/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Jun 18 02:42:49 2013] Setting source spectrum file to fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 18 02:42:49 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 18 02:42:49 2013] ../../xmm0112310101/products/lightcurves/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112310101/products/lightcurves/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Jun 18 03:14:26 2013] Updating aperture counts using extracted products
[Tue Jun 18 03:14:26 2013] Total counts from fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 55704.00
[Tue Jun 18 03:14:26 2013] Total counts from fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 5339.00
[Tue Jun 18 03:14:26 2013] Got source and background scale factors 3055776.000000, 115031661.000000
[Tue Jun 18 03:14:27 2013] User source parameters:
  Position = (291.6, 275.8) = 12 10 32.81 39 24 21.3
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source aperture counts = 55562.2 +/- 237.0
  Background aperture counts = 141.8
  Rate = 2 +/- 0.008

[Tue Jun 18 03:14:30 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 03:14:30 2013] Using photon index=1.80, rate=1.4, arf fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 18 03:14:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 03:14:30 2013] Updating source flux to 1.3e-11
[Tue Jun 18 03:14:42 2013] xmm0112310101/analysis//spectral/fullrun_mos1_xmm0112310101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete