[Tue Aug 28 10:47:02 2012] Detection parameters:
  Position = (280.3, 285.0) = 1 53 0.47 -13 44 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1349.7 +/- 48.7
  Background counts = 115.1
  Rate = 0.03 +/- 0.001

[Tue Aug 28 10:47:03 2012] Off-axis axis estimate = 1.64'
[Tue Aug 28 14:14:13 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 14:14:13 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Aug 28 14:14:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Aug 28 14:14:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Aug 28 14:46:56 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 14:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 14:46:56 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 14:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 14:46:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 14:46:56 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 14:46:56 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 14:46:56 2012] Fit fullrun_mos2_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 28 14:47:16 2012] Spatial fit model total counts = 2382.110000, observed total counts = 2296.000000
[Tue Aug 28 14:47:16 2012] Offset between fit and detection position for source 5 = 0.407892 pixels
[Tue Aug 28 14:47:16 2012] 2392.920000 total counts/ 1562.630000 bgd. counts: snr = 21.003986
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.407892 pixels
  Position = (280.7, 285.0) = 1 53 0.35 -13 44 17.5
  Extent = 9.9 (8.8-11.3)", rotation angle = 0
  Source counts = 830.3 +/- 48.9
  Background counts = 1562.6
  Rate = 0.03 +/- 0.001
[Tue Aug 28 14:47:16 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 14:47:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 14:47:16 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 14:47:16 2012] Source does appear to be extended
[Tue Aug 28 14:47:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 16:38:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 16:38:08 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Tue Aug 28 16:38:08 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.968
[Tue Aug 28 16:38:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.93"
[Tue Aug 28 17:06:48 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 17:06:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 17:06:48 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 17:06:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 17:06:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:06:48 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 17:06:49 2012] fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 17:06:49 2012] Fit fullrun_mos2_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 17:07:09 2012] Spatial fit model total counts = 2842.600000, observed total counts = 2755.000000
[Tue Aug 28 17:07:09 2012] Offset between fit and detection position for source 5 = 0.125386 pixels
[Tue Aug 28 17:07:09 2012] 2844.230000 total counts/ 1785.740000 bgd. counts: snr = 25.048265
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.125386 pixels
  Position = (280.8, 285.1) = 1 53 0.33 -13 44 17.1
  Extent = 11.7 (10.8-13.4)", rotation angle = 0
  Source counts = 1058.5 +/- 53.3
  Background counts = 1785.7
  Rate = 0.03 +/- 0.002
[Tue Aug 28 17:07:09 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:07:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:07:09 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 17:07:09 2012] Source does appear to be extended
[Tue Aug 28 17:07:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:44:15 2012] Counts = 1058.490000, rescaling region sizes by 2.000000
[Tue Aug 28 17:44:15 2012] XMMSAS src. selection expression = ellipse(24378.259200, 24758.542600, 1403.484040, 1403.484040, 0.000000, X, Y)
[Tue Aug 28 17:44:15 2012] Writing source region out to fullrun_mos2_xmm0112300101_pi300-10000_pass1_cl_src5_src.reg
[Tue Aug 28 17:44:15 2012] Extracting stamp from image fullrun_mos2_xmm0112300101_pi300-10000_cl_sm2.00.img.gz, (200, 204) - (361, 366)
[Tue Aug 28 17:44:15 2012] XMMSAS bgd. selection expression = annulus(24378.259200, 24758.542600, 4678.280135, 9356.560269, X, Y) && !ellipse(31835.470600, 20820.226400, 487.971214, 487.971214, 0.000000, X, Y) && !ellipse(16342.395050, 33282.987366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21258.587940, 16589.786800, 423.381612, 423.381612, 0.000000, X, Y) && !ellipse(16561.185400, 14960.982600, 651.432819, 251.436807, 34.175141, X, Y) && !ellipse(23607.968000, 21597.926000, 309.772009, 309.772009, 0.000000, X, Y) && !ellipse(15172.108919, 20361.841263, 563.678267, 376.827727, 90.000000, X, Y) && !ellipse(26146.178345, 20282.676239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23827.002289, 17426.836456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14662.785019, 22403.250793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17669.320282, 21792.983017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25469.010468, 25350.073120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23972.131500, 22047.470230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16422.604813, 22403.510986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30791.210510, 26299.288574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27464.862200, 27151.676800, 340.363210, 340.363210, 0.000000, X, Y) && !ellipse(25765.350400, 28090.427800, 422.223212, 422.223212, 0.000000, X, Y) && !ellipse(22567.180267, 23179.068939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.813751, 20378.779007, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 17:44:15 2012] Writing fullrun_mos2_xmm0112300101_pi300-10000_pass1_cl_src5.gif
[Tue Aug 28 17:44:20 2012] Mean detx,y = (269.87, 18.49) 
[Tue Aug 28 17:44:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 17:48:07 2012] grppha failed
[Tue Aug 28 17:48:07 2012] Setting source spectrum file to fullrun_mos2_xmm0112300101_pi300-10000_pass1_cl_src5_src.pi.gz
[Tue Aug 28 17:48:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112300101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Aug 28 17:56:18 2012] Updating aperture counts using extracted products
[Tue Aug 28 17:56:18 2012] Error reading totcts from fullrun_mos2_xmm0112300101_pi300-10000_pass1_cl_src5_src.pi.gz
[Tue Aug 28 17:56:18 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 17:56:21 2012] Source 5 has no response, skipping
[Tue Aug 28 17:56:22 2012] xmm0112300101/analysis//spectral/fullrun_mos2_xmm0112300101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete