[Tue Aug 28 10:46:26 2012] Detection parameters:
  Position = (269.0, 274.8) = 1 53 3.84 -13 45 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.3 +/- 18.8
  Background counts = 110.9
  Rate = 0.002 +/- 0.0004

[Tue Aug 28 10:46:27 2012] Off-axis axis estimate = 2.73'
[Tue Aug 28 13:22:25 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 13:22:25 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Tue Aug 28 13:22:25 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Tue Aug 28 13:22:25 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.80"
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src26.ximg exists
[Tue Aug 28 14:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src26.csv
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Aug 28 14:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src26.csv
[Tue Aug 28 14:14:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Aug 28 14:14:13 2012] Fit fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Aug 28 14:47:13 2012] Source 20 is offset by -7.037118 and -6.263356 pixels which is larger than
2 X fitted extent = 5.307678 x 5.307678, not incorporating fit results
[Tue Aug 28 14:47:13 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 14:47:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 14:47:13 2012] Assessing source extent using major
[Tue Aug 28 14:47:13 2012] Source does appear to be extended
[Tue Aug 28 14:47:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 16:04:58 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 16:04:58 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Tue Aug 28 16:04:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Tue Aug 28 16:04:58 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 7.80"
[Tue Aug 28 16:38:08 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src23.ximg exists
[Tue Aug 28 16:38:08 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Aug 28 16:38:08 2012] Fit fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src23 appears to have run properly
[Tue Aug 28 16:38:08 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Aug 28 16:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Aug 28 16:38:08 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Aug 28 16:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Aug 28 16:38:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:07:05 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.476393 pixels away
[Tue Aug 28 17:07:05 2012] Spatial fit model total counts = 863.860000, observed total counts = 795.000000
[Tue Aug 28 17:07:05 2012] Offset between fit and detection position for source 20 = 5.022172 pixels
[Tue Aug 28 17:07:05 2012] 935.439000 total counts/ 787.782000 bgd. counts: snr = 5.260791
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.022172 pixels
  Position = (264.5, 272.5) = 1 53 5.17 -13 45 12.0
  Extent = 10.4" x 10.4", rotation angle = 90
  Source counts = 147.7 +/- 30.6
  Background counts = 787.8
  Rate = 0.004 +/- 0.0009
[Tue Aug 28 17:07:05 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:07:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:07:05 2012] Assessing source extent using major
[Tue Aug 28 17:07:05 2012] Source does appear to be extended
[Tue Aug 28 17:07:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:35:24 2012] XMMSAS src. selection expression = ellipse(22966.798000, 23662.038000, 626.112018, 626.094018, 90.000000, X, Y)
[Tue Aug 28 17:35:24 2012] Writing source region out to fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src20_src.reg
[Tue Aug 28 17:35:24 2012] Extracting stamp from image fullrun_mos1_xmm0112300101_pi300-10000_cl_sm2.00.img.gz, (229, 237) - (301, 309)
[Tue Aug 28 17:35:24 2012] XMMSAS bgd. selection expression = annulus(22966.798000, 23662.038000, 1043.520030, 2087.040060, X, Y) && !ellipse(24329.078060, 24754.842800, 821.256024, 821.256024, 0.000000, X, Y) && !ellipse(23604.990000, 21599.874000, 276.696808, 276.696808, 0.000000, X, Y) && !ellipse(23959.440460, 22041.444641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25468.702484, 25432.835693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21019.664960, 25931.530800, 311.531209, 311.531209, 0.000000, X, Y) && !ellipse(22526.194400, 23143.529800, 595.979217, 595.979217, 0.000000, X, Y)
[Tue Aug 28 17:35:24 2012] Writing fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src20.gif
[Tue Aug 28 17:42:45 2012] Mean detx,y = (1767.92, 507.56) 
[Tue Aug 28 17:42:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 17:42:53 2012] grppha failed
[Tue Aug 28 17:42:54 2012] Setting source spectrum file to fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src20_src.pi.gz
[Tue Aug 28 17:42:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Aug 28 17:56:18 2012] Updating aperture counts using extracted products
[Tue Aug 28 17:56:18 2012] Error reading totcts from fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src20_src.pi.gz
[Tue Aug 28 17:56:18 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 17:56:20 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Tue Aug 28 17:56:20 2012] Source 20 has no response, skipping
[Tue Aug 28 17:56:21 2012] xmm0112300101/analysis//spectral/fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete