[Tue Aug 28 10:46:25 2012] Detection parameters:
  Position = (271.8, 249.0) = 1 53 2.99 -13 46 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 392.4 +/- 27.9
  Background counts = 102.9
  Rate = 0.009 +/- 0.0007

[Tue Aug 28 10:46:27 2012] Off-axis axis estimate = 4.07'
[Tue Aug 28 13:22:25 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 13:22:25 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Tue Aug 28 13:22:25 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.836
[Tue Aug 28 13:22:25 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.46"
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Aug 28 14:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Aug 28 14:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src4.csv
[Tue Aug 28 14:14:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Aug 28 14:14:13 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Aug 28 14:14:13 2012] Fit fullrun_mos1_xmm0112300101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Aug 28 14:47:13 2012] Source 2 is offset by -6.946071 and 6.741664 pixels which is larger than
2 X fitted extent = 0.972979 x 0.972979, not incorporating fit results
[Tue Aug 28 14:47:13 2012] Spatial fit model total counts = 741.714000, observed total counts = 738.000000
[Tue Aug 28 14:47:13 2012] Offset between fit and detection position for source 2 = 0.132578 pixels
[Tue Aug 28 14:47:13 2012] Warning, changing simple spatial fit ID from 4 to 9
[Tue Aug 28 14:47:13 2012] 727.851000 total counts/ 576.822000 bgd. counts: snr = 6.288390
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.132578 pixels
  Position = (271.9, 248.8) = 1 53 2.98 -13 46 55.1
  Extent = 3.5 (3.0-4.0)", rotation angle = 0
  Source counts = 151.0 +/- 27.0
  Background counts = 576.8
  Rate = 0.005 +/- 0.0008
[Tue Aug 28 14:47:13 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 14:47:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 14:47:13 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 14:47:13 2012] Source does appear to be extended
[Tue Aug 28 14:47:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 14:47:13 2012] Source is confused with source 24
[Tue Aug 28 16:04:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 16:04:58 2012] Initial guess for spatial extent in simple fitting = 3.46"
[Tue Aug 28 16:04:58 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.596
[Tue Aug 28 16:04:58 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 3.46"
[Tue Aug 28 16:38:07 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Aug 28 16:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src4.csv
[Tue Aug 28 16:38:07 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Aug 28 16:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src4.csv
[Tue Aug 28 16:38:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 16:38:08 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Aug 28 16:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Aug 28 16:38:08 2012] fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Aug 28 16:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Aug 28 16:38:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112300101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 17:07:05 2012] Warning, spatial fit 4 centroid is now closest to src. 24
[Tue Aug 28 17:07:05 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 17:07:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 17:07:05 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 17:07:05 2012] Source does appear to be extended
[Tue Aug 28 17:07:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 17:35:24 2012] XMMSAS src. selection expression = ellipse(23604.990000, 21599.874000, 207.522606, 207.522606, 0.000000, X, Y)
[Tue Aug 28 17:35:24 2012] Writing source region out to fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 28 17:35:24 2012] Extracting stamp from image fullrun_mos1_xmm0112300101_pi300-10000_cl_sm2.00.img.gz, (260, 237) - (284, 261)
[Tue Aug 28 17:35:24 2012] XMMSAS bgd. selection expression = annulus(23604.990000, 21599.874000, 345.871010, 691.742020, X, Y) && !ellipse(23959.440460, 22041.444641, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 17:35:24 2012] Writing fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src2.gif
[Tue Aug 28 17:36:16 2012] Mean detx,y = (3466.14, -863.01) 
[Tue Aug 28 17:36:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 17:36:27 2012] grppha failed
[Tue Aug 28 17:36:27 2012] Setting source spectrum file to fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 17:36:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 28 17:56:18 2012] Updating aperture counts using extracted products
[Tue Aug 28 17:56:18 2012] Error reading totcts from fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 17:56:18 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 17:56:20 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Tue Aug 28 17:56:20 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Aug 28 17:56:20 2012] Source 2 has no response, skipping
[Tue Aug 28 17:56:21 2012] xmm0112300101/analysis//spectral/fullrun_mos1_xmm0112300101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete