[Tue Apr 10 15:39:30 2012] Detection parameters:
  Position = (262.7, 157.1) = 14 3 30.57 -41 31 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 10.8
  Background counts = 5.7
  Rate = 0.02 +/- 0.002

[Tue Apr 10 15:39:30 2012] Off-axis axis estimate = 10.57'
[Tue Apr 10 15:39:40 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:39:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 15:39:40 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Tue Apr 10 15:39:40 2012] source mask rpix=2.7, npix_max = 40, mask sum = 41, frac = 1.005
[Tue Apr 10 15:39:40 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.71"
[Tue Apr 10 15:39:41 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_src6.ximg exists
[Tue Apr 10 15:39:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_src6.csv
[Tue Apr 10 15:39:41 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Apr 10 15:39:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_src6.csv
[Tue Apr 10 15:39:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:39:41 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Apr 10 15:39:41 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Apr 10 15:39:41 2012] Fit fullrun_pn_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Apr 10 15:39:45 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.427588 pixels away
[Tue Apr 10 15:39:45 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:39:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:39:45 2012] Assessing source extent using major
[Tue Apr 10 15:39:45 2012] Source does appear to be extended
[Tue Apr 10 15:39:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:39:52 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:39:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 15:39:52 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Tue Apr 10 15:39:52 2012] source mask rpix=2.7, npix_max = 40, mask sum = 41, frac = 1.005
[Tue Apr 10 15:39:52 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.71"
[Tue Apr 10 15:39:53 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_src6.ximg exists
[Tue Apr 10 15:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_src6.csv
[Tue Apr 10 15:39:53 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Apr 10 15:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_src6.csv
[Tue Apr 10 15:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:39:53 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Apr 10 15:39:53 2012] fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Apr 10 15:39:53 2012] Fit fullrun_pn_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Apr 10 15:39:57 2012] Spatial fit model total counts = 118.767000, observed total counts = 116.000000
[Tue Apr 10 15:39:57 2012] Offset between fit and detection position for source 6 = 0.042972 pixels
[Tue Apr 10 15:39:57 2012] 117.107700 total counts/ 66.229400 bgd. counts: snr = 6.251830
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.042972 pixels
  Position = (262.7, 157.1) = 14 3 30.55 -41 31 42.8
  Extent = 4.5 (3.2-6.1)", rotation angle = 0
  Source counts = 50.9 +/- 10.8
  Background counts = 66.2
  Rate = 0.02 +/- 0.003
[Tue Apr 10 15:39:57 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:39:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:39:57 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:39:57 2012] Source does appear to be extended
[Tue Apr 10 15:39:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:40:04 2012] XMMSAS src. selection expression = ellipse(22806.362700, 13616.515600, 270.715208, 270.715208, 0.000000, X, Y)
[Tue Apr 10 15:40:04 2012] Not overwriting source region fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src.reg
[Tue Apr 10 15:40:04 2012] Extracting stamp from image fullrun_pn_xmm0112291201_pi300-10000_cl_sm2.00.img.gz, (247, 142) - (278, 173)
[Tue Apr 10 15:40:04 2012] XMMSAS bgd. selection expression = annulus(22806.362700, 13616.515600, 451.192013, 902.384026, X, Y)
[Tue Apr 10 15:40:04 2012] Writing fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6.gif
[Tue Apr 10 15:40:04 2012] ../../xmm0112291201/products/events/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0112291201/products/events/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Apr 10 15:40:04 2012] Mean detx,y = (6028.38, -9050.05) 
[Tue Apr 10 15:40:04 2012] ../../xmm0112291201/products/images/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src.img and ../../xmm0112291201/products/images/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Apr 10 15:40:04 2012] ../../xmm0112291201/products/spectra/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0112291201/products/spectra/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Apr 10 15:40:04 2012] Setting source spectrum file to fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Apr 10 15:40:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Apr 10 15:40:04 2012] ../../xmm0112291201/products/lightcurves/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0112291201/products/lightcurves/fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Apr 10 15:40:05 2012] Not generating rmf since there are only 50 counts
[Tue Apr 10 15:40:05 2012] rmf not generated due to insufficient counts
[Tue Apr 10 15:40:05 2012] fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Tue Apr 10 15:40:14 2012] Updating aperture counts using extracted products
[Tue Apr 10 15:40:14 2012] Error reading totcts from fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Apr 10 15:40:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:40:14 2012] Using photon index=1.80, rate=0.0155, arf fullrun_pn_xmm0112291201_pi300-10000_pass1_cl_src6.arf
[Tue Apr 10 15:40:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:40:14 2012] Updating source flux to 9e-14
[Tue Apr 10 15:40:18 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting