[Tue Apr 10 15:39:31 2012] Detection parameters:
  Position = (291.0, 277.2) = 14 3 19.57 -41 22 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1234.9 +/- 41.4
  Background counts = 9.7
  Rate = 0.2 +/- 0.008

[Tue Apr 10 15:39:31 2012] Off-axis axis estimate = 1.63'
[Tue Apr 10 15:39:41 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:39:41 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Apr 10 15:39:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Tue Apr 10 15:39:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Apr 10 15:39:42 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 15:39:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 15:39:42 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 15:39:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 15:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:39:42 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 15:39:42 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 15:39:42 2012] Fit fullrun_mos2_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 15:39:47 2012] Spatial fit model total counts = 986.786000, observed total counts = 963.000000
[Tue Apr 10 15:39:47 2012] Offset between fit and detection position for source 1 = 0.204864 pixels
[Tue Apr 10 15:39:47 2012] 979.233000 total counts/ 299.586000 bgd. counts: snr = 39.266541
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.204864 pixels
  Position = (291.0, 277.4) = 14 3 19.58 -41 22 59.4
  Extent = 4.9 (4.5-5.2)", rotation angle = 0
  Source counts = 679.6 +/- 31.3
  Background counts = 299.6
  Rate = 0.2 +/- 0.007
[Tue Apr 10 15:39:47 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:39:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:39:47 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:39:47 2012] Source does appear to be extended
[Tue Apr 10 15:39:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:39:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:39:53 2012] Initial guess for spatial extent in simple fitting = 4.86"
[Tue Apr 10 15:39:53 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.147
[Tue Apr 10 15:39:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.86"
[Tue Apr 10 15:39:54 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 15:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 15:39:54 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 15:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 15:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:39:54 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 15:39:54 2012] fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 15:39:54 2012] Fit fullrun_mos2_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 15:39:59 2012] Spatial fit model total counts = 987.796000, observed total counts = 963.000000
[Tue Apr 10 15:39:59 2012] Offset between fit and detection position for source 1 = 0.003173 pixels
[Tue Apr 10 15:39:59 2012] 980.295000 total counts/ 298.633000 bgd. counts: snr = 39.445747
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003173 pixels
  Position = (291.0, 277.4) = 14 3 19.58 -41 22 59.4
  Extent = 4.9 (4.5-5.2)", rotation angle = 0
  Source counts = 681.7 +/- 31.3
  Background counts = 298.6
  Rate = 0.2 +/- 0.007
[Tue Apr 10 15:39:59 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:39:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:39:59 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:39:59 2012] Source does appear to be extended
[Tue Apr 10 15:39:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:40:06 2012] XMMSAS src. selection expression = ellipse(25269.624958, 24085.098600, 292.107008, 292.107008, 0.000000, X, Y)
[Tue Apr 10 15:40:06 2012] Not overwriting source region fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 15:40:06 2012] Extracting stamp from image fullrun_mos2_xmm0112291201_pi300-10000_cl_sm2.00.img.gz, (274, 261) - (308, 294)
[Tue Apr 10 15:40:06 2012] XMMSAS bgd. selection expression = annulus(25269.624958, 24085.098600, 486.845014, 973.690028, X, Y)
[Tue Apr 10 15:40:06 2012] Writing fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 15:40:06 2012] ../../xmm0112291201/products/events/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112291201/products/events/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 15:40:06 2012] Mean detx,y = (-19.07, -113.88) 
[Tue Apr 10 15:40:06 2012] ../../xmm0112291201/products/images/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112291201/products/images/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 15:40:06 2012] ../../xmm0112291201/products/spectra/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112291201/products/spectra/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 15:40:06 2012] Setting source spectrum file to fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 15:40:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 15:40:06 2012] ../../xmm0112291201/products/lightcurves/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112291201/products/lightcurves/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 15:40:06 2012] fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 15:40:06 2012] fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 15:40:15 2012] Updating aperture counts using extracted products
[Tue Apr 10 15:40:15 2012] Error reading totcts from fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 15:40:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:40:15 2012] Using photon index=1.80, rate=0.152, arf fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 15:40:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:40:15 2012] Updating source flux to 2e-12
[Tue Apr 10 15:40:18 2012] Reading fit data from xmm0112291201/analysis//spectral/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 15:40:18 2012] Spectral fit parameter nH value = 9.52282e+20
[Tue Apr 10 15:40:18 2012] Spectral fit parameter PhoIndex value = 3.00309
[Tue Apr 10 15:40:18 2012] Failed to get F(0.3-8.0) from xmm0112291201/analysis//spectral/fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 15:40:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:40:18 2012] Using Nh = 9.5e+20, photon index=3.00, rate=0.152, arf fullrun_mos2_xmm0112291201_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 15:40:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:40:18 2012] Updating source flux to 1.4e-12