[Tue Apr 10 15:39:31 2012] Detection parameters:
  Position = (291.1, 277.2) = 14 3 19.55 -41 22 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1298.0 +/- 43.5
  Background counts = 8.9
  Rate = 0.2 +/- 0.008

[Tue Apr 10 15:39:31 2012] Off-axis axis estimate = 1.63'
[Tue Apr 10 15:39:41 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:39:41 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Apr 10 15:39:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Tue Apr 10 15:39:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Apr 10 15:39:41 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 15:39:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 15:39:41 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 15:39:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 15:39:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:39:41 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 15:39:41 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 15:39:41 2012] Fit fullrun_mos1_xmm0112291201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 15:39:46 2012] Spatial fit model total counts = 981.000000, observed total counts = 981.000000
[Tue Apr 10 15:39:46 2012] Offset between fit and detection position for source 1 = 0.121041 pixels
[Tue Apr 10 15:39:46 2012] 985.822000 total counts/ 222.289000 bgd. counts: snr = 51.211657
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.121041 pixels
  Position = (291.1, 277.3) = 14 3 19.54 -41 22 59.8
  Extent = 6.0 (5.6-6.3)", rotation angle = 0
  Source counts = 763.5 +/- 31.4
  Background counts = 222.3
  Rate = 0.2 +/- 0.007
[Tue Apr 10 15:39:46 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:39:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:39:46 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:39:46 2012] Source does appear to be extended
[Tue Apr 10 15:39:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:39:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 15:39:53 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Tue Apr 10 15:39:53 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.140
[Tue Apr 10 15:39:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.97"
[Tue Apr 10 15:39:53 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 15:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 15:39:53 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 15:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 15:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 15:39:53 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 15:39:53 2012] fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 15:39:53 2012] Fit fullrun_mos1_xmm0112291201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 15:39:58 2012] Spatial fit model total counts = 981.000000, observed total counts = 981.000000
[Tue Apr 10 15:39:58 2012] Offset between fit and detection position for source 1 = 0.000159 pixels
[Tue Apr 10 15:39:58 2012] 985.829000 total counts/ 222.508000 bgd. counts: snr = 51.172236
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000159 pixels
  Position = (291.1, 277.3) = 14 3 19.54 -41 22 59.8
  Extent = 6.0 (5.6-6.3)", rotation angle = 0
  Source counts = 763.3 +/- 31.4
  Background counts = 222.5
  Rate = 0.2 +/- 0.007
[Tue Apr 10 15:39:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 15:39:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 15:39:58 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 15:39:58 2012] Source does appear to be extended
[Tue Apr 10 15:39:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 15:40:05 2012] XMMSAS src. selection expression = ellipse(25278.702960, 24076.833400, 358.171210, 358.171210, 0.000000, X, Y)
[Tue Apr 10 15:40:05 2012] Not overwriting source region fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 15:40:05 2012] Extracting stamp from image fullrun_mos1_xmm0112291201_pi300-10000_cl_sm2.00.img.gz, (271, 257) - (312, 298)
[Tue Apr 10 15:40:05 2012] XMMSAS bgd. selection expression = annulus(25278.702960, 24076.833400, 596.952017, 1193.904034, X, Y)
[Tue Apr 10 15:40:05 2012] Writing fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 15:40:05 2012] ../../xmm0112291201/products/events/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112291201/products/events/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 15:40:05 2012] Mean detx,y = (116.58, -152.80) 
[Tue Apr 10 15:40:05 2012] ../../xmm0112291201/products/images/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112291201/products/images/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 15:40:05 2012] ../../xmm0112291201/products/spectra/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112291201/products/spectra/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 15:40:05 2012] Setting source spectrum file to fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 15:40:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 15:40:05 2012] ../../xmm0112291201/products/lightcurves/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112291201/products/lightcurves/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 15:40:06 2012] fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 15:40:06 2012] fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 15:40:14 2012] Updating aperture counts using extracted products
[Tue Apr 10 15:40:14 2012] Error reading totcts from fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 15:40:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:40:15 2012] Using photon index=1.80, rate=0.168, arf fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 15:40:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:40:15 2012] Updating source flux to 1.9e-12
[Tue Apr 10 15:40:17 2012] Reading fit data from xmm0112291201/analysis//spectral/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 15:40:17 2012] Spectral fit parameter nH value = 1.6458e+21
[Tue Apr 10 15:40:17 2012] Spectral fit parameter PhoIndex value = 3.30511
[Tue Apr 10 15:40:17 2012] Failed to get F(0.3-8.0) from xmm0112291201/analysis//spectral/fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 15:40:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 15:40:17 2012] Using Nh = 1.6e+21, photon index=3.31, rate=0.168, arf fullrun_mos1_xmm0112291201_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 15:40:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 15:40:17 2012] Updating source flux to 1.3e-12