[Tue Apr 10 18:35:13 2012] Detection parameters:
  Position = (297.9, 324.1) = 14 3 19.56 -41 22 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2713.5 +/- 61.8
  Background counts = 4.4
  Rate = 0.4 +/- 0.008

[Tue Apr 10 18:35:13 2012] Off-axis axis estimate = 1.86'
[Tue Apr 10 18:35:21 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:35:21 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Tue Apr 10 18:35:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Tue Apr 10 18:35:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Tue Apr 10 18:35:22 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 18:35:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 18:35:22 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 18:35:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 18:35:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:35:22 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 18:35:22 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:35:22 2012] Fit fullrun_mos2_xmm0112290701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:35:26 2012] Spatial fit model total counts = 2452.000000, observed total counts = 2452.000000
[Tue Apr 10 18:35:26 2012] Offset between fit and detection position for source 1 = 0.172532 pixels
[Tue Apr 10 18:35:26 2012] 2441.722000 total counts/ 519.412000 bgd. counts: snr = 84.346572
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.172532 pixels
  Position = (297.7, 324.1) = 14 3 19.63 -41 22 58.9
  Extent = 5.5 (5.3-5.8)", rotation angle = 0
  Source counts = 1922.3 +/- 49.4
  Background counts = 519.4
  Rate = 0.3 +/- 0.006
[Tue Apr 10 18:35:26 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:35:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:35:26 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:35:26 2012] Source does appear to be extended
[Tue Apr 10 18:35:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:35:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:35:31 2012] Initial guess for spatial extent in simple fitting = 5.55"
[Tue Apr 10 18:35:31 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.952
[Tue Apr 10 18:35:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.55"
[Tue Apr 10 18:35:31 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 18:35:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 18:35:31 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 18:35:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 18:35:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:35:31 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 18:35:31 2012] fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:35:31 2012] Fit fullrun_mos2_xmm0112290701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:35:36 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Tue Apr 10 18:35:36 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:35:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:35:36 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:35:36 2012] Source does appear to be extended
[Tue Apr 10 18:35:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:35:41 2012] Counts = 1922.310000, rescaling region sizes by 2.000000
[Tue Apr 10 18:35:41 2012] XMMSAS src. selection expression = ellipse(25851.001800, 28148.780600, 665.584819, 665.584819, 0.000000, X, Y)
[Tue Apr 10 18:35:41 2012] Not overwriting source region fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 18:35:41 2012] Extracting stamp from image fullrun_mos2_xmm0112290701_pi300-10000_cl_sm2.00.img.gz, (259, 286) - (336, 362)
[Tue Apr 10 18:35:41 2012] XMMSAS bgd. selection expression = annulus(25851.001800, 28148.780600, 2218.616064, 4437.232128, X, Y) && !ellipse(21732.339600, 26476.381800, 432.463212, 416.987212, 92.646693, X, Y) && !ellipse(23752.759600, 28356.909000, 344.508010, 344.508010, 0.000000, X, Y)
[Tue Apr 10 18:35:41 2012] Writing fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 18:35:41 2012] ../../xmm0112290701/products/events/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112290701/products/events/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 18:35:41 2012] Mean detx,y = (-316.16, 40.86) 
[Tue Apr 10 18:35:41 2012] ../../xmm0112290701/products/images/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112290701/products/images/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 18:35:41 2012] ../../xmm0112290701/products/spectra/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112290701/products/spectra/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 18:35:41 2012] Setting source spectrum file to fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 18:35:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 18:35:41 2012] ../../xmm0112290701/products/lightcurves/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112290701/products/lightcurves/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 18:35:42 2012] fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 18:35:42 2012] fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 18:35:48 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 18:35:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:35:48 2012] Using photon index=1.80, rate=0.253, arf fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 18:35:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:35:48 2012] Updating source flux to 2.4e-12
[Tue Apr 10 18:35:51 2012] Reading fit data from xmm0112290701/analysis//spectral/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 18:35:51 2012] Spectral fit parameter nH value = 1.33393e+21
[Tue Apr 10 18:35:51 2012] Spectral fit parameter PhoIndex value = 3.46665
[Tue Apr 10 18:35:51 2012] Failed to get F(0.3-8.0) from xmm0112290701/analysis//spectral/fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:35:51 2012] Using Nh = 1.3e+21, photon index=3.47, rate=0.253, arf fullrun_mos2_xmm0112290701_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:35:51 2012] Updating source flux to 1.6e-12