[Tue Apr 10 18:35:13 2012] Detection parameters:
  Position = (297.9, 324.1) = 14 3 19.55 -41 22 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2669.4 +/- 62.2
  Background counts = 5.3
  Rate = 0.4 +/- 0.008

[Tue Apr 10 18:35:13 2012] Off-axis axis estimate = 1.86'
[Tue Apr 10 18:35:21 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:35:21 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Tue Apr 10 18:35:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Tue Apr 10 18:35:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Tue Apr 10 18:35:21 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 18:35:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 18:35:21 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 18:35:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 18:35:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:35:21 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 18:35:21 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:35:21 2012] Fit fullrun_mos1_xmm0112290701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:35:25 2012] Source 1 is offset by 6.660382 and 5.859997 pixels which is larger than
2 X fitted extent = 0.845844 x 0.845844, not incorporating fit results
[Tue Apr 10 18:35:25 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:35:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:35:25 2012] Assessing source extent using major
[Tue Apr 10 18:35:25 2012] Source does appear to be extended
[Tue Apr 10 18:35:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:35:31 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:35:31 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Tue Apr 10 18:35:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Tue Apr 10 18:35:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.36"
[Tue Apr 10 18:35:31 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 18:35:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 18:35:31 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 18:35:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 18:35:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:35:31 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 18:35:31 2012] fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:35:31 2012] Fit fullrun_mos1_xmm0112290701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:35:34 2012] Spatial fit model total counts = 2364.000000, observed total counts = 2364.000000
[Tue Apr 10 18:35:34 2012] Offset between fit and detection position for source 1 = 0.185464 pixels
[Tue Apr 10 18:35:34 2012] 2367.455000 total counts/ 540.865000 bgd. counts: snr = 78.541038
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.185464 pixels
  Position = (297.7, 324.2) = 14 3 19.61 -41 22 58.5
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1826.6 +/- 48.7
  Background counts = 540.9
  Rate = 0.2 +/- 0.006
[Tue Apr 10 18:35:34 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:35:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:35:34 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:35:34 2012] Source does appear to be extended
[Tue Apr 10 18:35:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:35:40 2012] Counts = 1826.590000, rescaling region sizes by 2.000000
[Tue Apr 10 18:35:40 2012] XMMSAS src. selection expression = ellipse(25855.370200, 28157.336600, 645.894019, 645.894019, 0.000000, X, Y)
[Tue Apr 10 18:35:40 2012] Not overwriting source region fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 18:35:40 2012] Extracting stamp from image fullrun_mos1_xmm0112290701_pi300-10000_cl_sm2.00.img.gz, (261, 287) - (335, 361)
[Tue Apr 10 18:35:40 2012] XMMSAS bgd. selection expression = annulus(25855.370200, 28157.336600, 2152.980062, 4305.960124, X, Y) && !ellipse(23775.553600, 28289.269400, 575.436817, 575.436817, 0.000000, X, Y) && !ellipse(21778.812000, 26444.797800, 483.294380, 483.294380, 0.000000, X, Y)
[Tue Apr 10 18:35:40 2012] Writing fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 18:35:40 2012] ../../xmm0112290701/products/events/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112290701/products/events/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 18:35:40 2012] Mean detx,y = (250.86, 175.91) 
[Tue Apr 10 18:35:40 2012] ../../xmm0112290701/products/images/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112290701/products/images/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 18:35:40 2012] ../../xmm0112290701/products/spectra/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112290701/products/spectra/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 18:35:40 2012] Setting source spectrum file to fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 18:35:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 18:35:40 2012] ../../xmm0112290701/products/lightcurves/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112290701/products/lightcurves/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 18:35:41 2012] fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 18:35:41 2012] fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 18:35:47 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:35:47 2012] Error reading totcts from fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 18:35:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:35:47 2012] Using photon index=1.80, rate=0.24, arf fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 18:35:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:35:47 2012] Updating source flux to 2.3e-12
[Tue Apr 10 18:35:49 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Apr 10 18:35:50 2012] Reading fit data from xmm0112290701/analysis//spectral/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 18:35:50 2012] Spectral fit parameter nH value = 1.19962e+21
[Tue Apr 10 18:35:50 2012] Spectral fit parameter PhoIndex value = 3.32716
[Tue Apr 10 18:35:50 2012] Failed to get F(0.3-8.0) from xmm0112290701/analysis//spectral/fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:35:50 2012] Using Nh = 1.2e+21, photon index=3.33, rate=0.24, arf fullrun_mos1_xmm0112290701_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:35:50 2012] Updating source flux to 1.6e-12