[Tue Apr 10 18:27:18 2012] Detection parameters:
  Position = (275.3, 386.3) = 14 3 29.12 -41 18 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.2 +/- 11.1
  Background counts = 9.0
  Rate = 0.02 +/- 0.003

[Tue Apr 10 18:27:19 2012] Off-axis axis estimate = 6.59'
[Tue Apr 10 18:27:30 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:30 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Tue Apr 10 18:27:30 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.735
[Tue Apr 10 18:27:30 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.72"
[Tue Apr 10 18:27:30 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_src5.ximg exists
[Tue Apr 10 18:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_src5.csv
[Tue Apr 10 18:27:30 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Apr 10 18:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_src5.csv
[Tue Apr 10 18:27:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:31 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Apr 10 18:27:31 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Apr 10 18:27:31 2012] Fit fullrun_mos2_xmm0112290601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Apr 10 18:27:36 2012] Spatial fit model total counts = 83.999800, observed total counts = 84.000000
[Tue Apr 10 18:27:36 2012] Offset between fit and detection position for source 3 = 1.181727 pixels
[Tue Apr 10 18:27:36 2012] 82.639400 total counts/ 24.561000 bgd. counts: snr = 11.719029
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.181727 pixels
  Position = (275.0, 387.5) = 14 3 29.23 -41 18 23.0
  Extent = 4.2 (3.5-4.9)", rotation angle = 0
  Source counts = 58.1 +/- 9.1
  Background counts = 24.6
  Rate = 0.009 +/- 0.001
[Tue Apr 10 18:27:36 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:36 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:36 2012] Source does appear to be extended
[Tue Apr 10 18:27:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:43 2012] Initial guess for spatial extent in simple fitting = 4.15"
[Tue Apr 10 18:27:43 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.709
[Tue Apr 10 18:27:43 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.15"
[Tue Apr 10 18:27:43 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_src5.ximg exists
[Tue Apr 10 18:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_src5.csv
[Tue Apr 10 18:27:43 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Apr 10 18:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_src5.csv
[Tue Apr 10 18:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:43 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Apr 10 18:27:43 2012] fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Apr 10 18:27:43 2012] Fit fullrun_mos2_xmm0112290601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Apr 10 18:27:49 2012] Spatial fit model total counts = 82.999800, observed total counts = 83.000000
[Tue Apr 10 18:27:49 2012] Offset between fit and detection position for source 3 = 0.002859 pixels
[Tue Apr 10 18:27:49 2012] 81.376800 total counts/ 23.411100 bgd. counts: snr = 11.980093
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002859 pixels
  Position = (275.0, 387.5) = 14 3 29.23 -41 18 23.0
  Extent = 4.1 (3.4-4.9)", rotation angle = 0
  Source counts = 58.0 +/- 9.0
  Background counts = 23.4
  Rate = 0.009 +/- 0.001
[Tue Apr 10 18:27:49 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:49 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:49 2012] Source does appear to be extended
[Tue Apr 10 18:27:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:57 2012] XMMSAS src. selection expression = ellipse(23878.849040, 33660.916200, 248.884207, 248.884207, 0.000000, X, Y)
[Tue Apr 10 18:27:57 2012] Not overwriting source region fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src.reg
[Tue Apr 10 18:27:57 2012] Extracting stamp from image fullrun_mos2_xmm0112290601_pi300-10000_cl_sm2.00.img.gz, (261, 373) - (289, 402)
[Tue Apr 10 18:27:57 2012] XMMSAS bgd. selection expression = annulus(23878.849040, 33660.916200, 414.807012, 829.614024, X, Y)
[Tue Apr 10 18:27:57 2012] Writing fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3.gif
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/events/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112290601/products/events/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 18:27:57 2012] Mean detx,y = (-261.40, 6248.73) 
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/images/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112290601/products/images/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/spectra/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112290601/products/spectra/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 18:27:57 2012] Setting source spectrum file to fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 18:27:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/lightcurves/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112290601/products/lightcurves/fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 18:27:58 2012] Not generating rmf since there are only 57 counts
[Tue Apr 10 18:27:58 2012] rmf not generated due to insufficient counts
[Tue Apr 10 18:27:58 2012] fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Apr 10 18:28:09 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:28:09 2012] Error reading totcts from fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 18:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:09 2012] Using photon index=1.80, rate=0.00912, arf fullrun_mos2_xmm0112290601_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 18:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:09 2012] Updating source flux to 2e-13
[Tue Apr 10 18:28:11 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting