[Tue Apr 10 18:27:18 2012] Detection parameters:
  Position = (161.0, 256.3) = 14 4 13.38 -41 27 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.0 +/- 11.9
  Background counts = 6.3
  Rate = 0.01 +/- 0.002

[Tue Apr 10 18:27:18 2012] Off-axis axis estimate = 10.42'
[Tue Apr 10 18:27:30 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:30 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Tue Apr 10 18:27:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.843
[Tue Apr 10 18:27:30 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.64"
[Tue Apr 10 18:27:30 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_src9.ximg exists
[Tue Apr 10 18:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_src9.csv
[Tue Apr 10 18:27:30 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Apr 10 18:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_src9.csv
[Tue Apr 10 18:27:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:30 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Apr 10 18:27:30 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Apr 10 18:27:30 2012] Fit fullrun_mos1_xmm0112290601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Apr 10 18:27:35 2012] Spatial fit model total counts = 79.998400, observed total counts = 80.000000
[Tue Apr 10 18:27:35 2012] Offset between fit and detection position for source 11 = 0.468888 pixels
[Tue Apr 10 18:27:35 2012] 79.363700 total counts/ 24.919300 bgd. counts: snr = 10.906497
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.468888 pixels
  Position = (161.2, 256.7) = 14 4 13.32 -41 27 51.1
  Extent = 6.4 (5.3-7.8)", rotation angle = 0
  Source counts = 54.4 +/- 8.9
  Background counts = 24.9
  Rate = 0.009 +/- 0.001
[Tue Apr 10 18:27:35 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:35 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:35 2012] Source does appear to be extended
[Tue Apr 10 18:27:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:42 2012] Initial guess for spatial extent in simple fitting = 6.42"
[Tue Apr 10 18:27:42 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.024
[Tue Apr 10 18:27:42 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.42"
[Tue Apr 10 18:27:43 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_src9.ximg exists
[Tue Apr 10 18:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_src9.csv
[Tue Apr 10 18:27:43 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Apr 10 18:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_src9.csv
[Tue Apr 10 18:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:43 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Apr 10 18:27:43 2012] fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Apr 10 18:27:43 2012] Fit fullrun_mos1_xmm0112290601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Apr 10 18:27:48 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Tue Apr 10 18:27:48 2012] Source 9 in spatial fitting is no longer close to this source
[Tue Apr 10 18:27:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:48 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:48 2012] Source does appear to be extended
[Tue Apr 10 18:27:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:56 2012] XMMSAS src. selection expression = ellipse(13971.973000, 22284.988400, 385.362011, 385.362011, 0.000000, X, Y)
[Tue Apr 10 18:27:56 2012] Not overwriting source region fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src.reg
[Tue Apr 10 18:27:56 2012] Extracting stamp from image fullrun_mos1_xmm0112290601_pi300-10000_cl_sm2.00.img.gz, (139, 235) - (183, 279)
[Tue Apr 10 18:27:56 2012] XMMSAS bgd. selection expression = annulus(13971.973000, 22284.988400, 642.270018, 1284.540037, X, Y)
[Tue Apr 10 18:27:56 2012] Writing fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11.gif
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/events/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0112290601/products/events/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Apr 10 18:27:57 2012] Mean detx,y = (452.32, -13713.42) 
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/images/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src.img and ../../xmm0112290601/products/images/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/spectra/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0112290601/products/spectra/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Apr 10 18:27:57 2012] Setting source spectrum file to fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Apr 10 18:27:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Apr 10 18:27:57 2012] ../../xmm0112290601/products/lightcurves/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0112290601/products/lightcurves/fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Apr 10 18:27:57 2012] Not generating rmf since there are only 54 counts
[Tue Apr 10 18:27:57 2012] rmf not generated due to insufficient counts
[Tue Apr 10 18:27:57 2012] fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue Apr 10 18:28:08 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:28:08 2012] Error reading totcts from fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Apr 10 18:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:09 2012] Using photon index=1.80, rate=0.00857, arf fullrun_mos1_xmm0112290601_pi300-10000_pass1_cl_src11.arf
[Tue Apr 10 18:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:09 2012] Updating source flux to 2.7e-13
[Tue Apr 10 18:28:10 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting