[Tue Apr 10 16:31:23 2012] Detection parameters:
  Position = (276.2, 385.4) = 14 3 29.38 -41 18 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.3 +/- 11.4
  Background counts = 5.9
  Rate = 0.02 +/- 0.002

[Tue Apr 10 16:31:23 2012] Off-axis axis estimate = 6.51'
[Tue Apr 10 16:31:35 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:31:35 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Tue Apr 10 16:31:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.908
[Tue Apr 10 16:31:35 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.68"
[Tue Apr 10 16:31:35 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src7.ximg exists
[Tue Apr 10 16:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src7.csv
[Tue Apr 10 16:31:35 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Apr 10 16:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src7.csv
[Tue Apr 10 16:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:31:36 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Apr 10 16:31:36 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Apr 10 16:31:36 2012] Fit fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Apr 10 16:31:41 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.174917 pixels away
[Tue Apr 10 16:31:41 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:31:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:31:41 2012] Assessing source extent using major
[Tue Apr 10 16:31:41 2012] Source does appear to be extended
[Tue Apr 10 16:31:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:31:49 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:31:49 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Tue Apr 10 16:31:49 2012] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.908
[Tue Apr 10 16:31:49 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.68"
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src7.ximg exists
[Tue Apr 10 16:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src7.csv
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Apr 10 16:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src7.csv
[Tue Apr 10 16:31:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Apr 10 16:31:50 2012] Fit fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Apr 10 16:31:55 2012] Spatial fit model total counts = 122.515000, observed total counts = 123.000000
[Tue Apr 10 16:31:55 2012] Offset between fit and detection position for source 2 = 0.763789 pixels
[Tue Apr 10 16:31:55 2012] 123.359300 total counts/ 66.644300 bgd. counts: snr = 6.947306
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.763789 pixels
  Position = (276.1, 386.2) = 14 3 29.43 -41 18 24.8
  Extent = 3.5 (2.9-4.2)", rotation angle = 0
  Source counts = 56.7 +/- 11.1
  Background counts = 66.6
  Rate = 0.008 +/- 0.002
[Tue Apr 10 16:31:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:31:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:31:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:31:55 2012] Source does appear to be extended
[Tue Apr 10 16:31:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:32:04 2012] XMMSAS src. selection expression = ellipse(23969.401780, 33551.136780, 208.481406, 208.481406, 0.000000, X, Y)
[Tue Apr 10 16:32:04 2012] Not overwriting source region fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src.reg
[Tue Apr 10 16:32:04 2012] Extracting stamp from image fullrun_mos1_xmm0112290501_pi300-10000_cl_sm2.00.img.gz, (264, 374) - (288, 398)
[Tue Apr 10 16:32:04 2012] XMMSAS bgd. selection expression = annulus(23969.401780, 33551.136780, 347.469010, 694.938020, X, Y)
[Tue Apr 10 16:32:04 2012] Writing fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2.gif
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/events/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0112290501/products/events/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 16:32:04 2012] Mean detx,y = (6401.44, -318.05) 
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/images/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src.img and ../../xmm0112290501/products/images/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/spectra/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0112290501/products/spectra/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 16:32:04 2012] Setting source spectrum file to fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:32:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/lightcurves/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0112290501/products/lightcurves/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 16:32:04 2012] Not generating rmf since there are only 56 counts
[Tue Apr 10 16:32:04 2012] rmf not generated due to insufficient counts
[Tue Apr 10 16:32:04 2012] fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Apr 10 16:32:14 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:32:14 2012] Error reading totcts from fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:32:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:32:14 2012] Using photon index=1.80, rate=0.00775, arf fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 16:32:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:32:14 2012] Updating source flux to 1.8e-13
[Tue Apr 10 16:32:16 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting