[Tue Apr 10 16:31:23 2012] Detection parameters:
  Position = (301.3, 323.0) = 14 3 19.66 -41 22 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2841.5 +/- 64.1
  Background counts = 6.0
  Rate = 0.4 +/- 0.009

[Tue Apr 10 16:31:23 2012] Off-axis axis estimate = 1.79'
[Tue Apr 10 16:31:35 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:31:35 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Apr 10 16:31:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Tue Apr 10 16:31:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Tue Apr 10 16:31:35 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 16:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:31:35 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 16:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:31:36 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 16:31:36 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:31:36 2012] Fit fullrun_mos1_xmm0112290501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:31:41 2012] Spatial fit model total counts = 2449.000000, observed total counts = 2449.000000
[Tue Apr 10 16:31:41 2012] Offset between fit and detection position for source 1 = 0.142023 pixels
[Tue Apr 10 16:31:41 2012] 2459.116000 total counts/ 607.796000 bgd. counts: snr = 75.093539
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.142023 pixels
  Position = (301.2, 323.0) = 14 3 19.72 -41 22 59.8
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1851.3 +/- 49.6
  Background counts = 607.8
  Rate = 0.3 +/- 0.007
[Tue Apr 10 16:31:41 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:31:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:31:41 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:31:41 2012] Source does appear to be extended
[Tue Apr 10 16:31:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:31:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:31:49 2012] Initial guess for spatial extent in simple fitting = 5.00"
[Tue Apr 10 16:31:49 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.104
[Tue Apr 10 16:31:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.00"
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 16:31:50 2012] Fit fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 16:31:50 2012] fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:31:50 2012] Fit fullrun_mos1_xmm0112290501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:31:55 2012] Spatial fit model total counts = 2449.440000, observed total counts = 2449.000000
[Tue Apr 10 16:31:55 2012] Offset between fit and detection position for source 1 = 0.001576 pixels
[Tue Apr 10 16:31:55 2012] 2459.611000 total counts/ 610.281000 bgd. counts: snr = 74.859943
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001576 pixels
  Position = (301.2, 323.0) = 14 3 19.72 -41 22 59.8
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1849.3 +/- 49.6
  Background counts = 610.3
  Rate = 0.3 +/- 0.007
[Tue Apr 10 16:31:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:31:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:31:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:31:55 2012] Source does appear to be extended
[Tue Apr 10 16:31:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:32:04 2012] Counts = 1849.330000, rescaling region sizes by 2.000000
[Tue Apr 10 16:32:04 2012] XMMSAS src. selection expression = ellipse(26156.256160, 28050.946400, 597.759617, 597.759617, 0.000000, X, Y)
[Tue Apr 10 16:32:04 2012] Not overwriting source region fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 16:32:04 2012] Extracting stamp from image fullrun_mos1_xmm0112290501_pi300-10000_cl_sm2.00.img.gz, (267, 289) - (336, 357)
[Tue Apr 10 16:32:04 2012] XMMSAS bgd. selection expression = annulus(26156.256160, 28050.946400, 1992.532057, 3985.064115, X, Y) && !ellipse(22053.890980, 26362.371600, 385.748811, 385.748811, 0.000000, X, Y) && !ellipse(24192.159800, 28259.188600, 1225.784035, 1225.784035, 0.000000, X, Y)
[Tue Apr 10 16:32:04 2012] Writing fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/events/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112290501/products/events/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 16:32:04 2012] Mean detx,y = (482.93, -342.60) 
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/images/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112290501/products/images/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/spectra/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112290501/products/spectra/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 16:32:04 2012] Setting source spectrum file to fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 16:32:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 16:32:04 2012] ../../xmm0112290501/products/lightcurves/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112290501/products/lightcurves/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 16:32:04 2012] fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 16:32:04 2012] fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 16:32:14 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:32:14 2012] Error reading totcts from fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 16:32:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:32:14 2012] Using photon index=1.80, rate=0.253, arf fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 16:32:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:32:14 2012] Updating source flux to 2.5e-12
[Tue Apr 10 16:32:17 2012] Reading fit data from xmm0112290501/analysis//spectral/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 16:32:17 2012] Spectral fit parameter nH value = 1.48056e+21
[Tue Apr 10 16:32:17 2012] Spectral fit parameter PhoIndex value = 3.59355
[Tue Apr 10 16:32:17 2012] Failed to get F(0.3-8.0) from xmm0112290501/analysis//spectral/fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 16:32:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:32:17 2012] Using Nh = 1.5e+21, photon index=3.59, rate=0.253, arf fullrun_mos1_xmm0112290501_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 16:32:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:32:17 2012] Updating source flux to 1.7e-12