[Thu Oct 13 17:44:28 2011] Detection parameters:
  Position = (301.2, 314.2) = 12 30 34.32 41 38 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.7 +/- 10.4
  Background counts = 7.5
  Rate = 0.003 +/- 0.0006

[Thu Oct 13 17:44:28 2011] Off-axis axis estimate = 1.16'
[Thu Oct 13 19:42:58 2011] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu Oct 13 19:42:58 2011] Initial guess for spatial extent in simple fitting = 7.01"
[Thu Oct 13 19:42:58 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Thu Oct 13 19:42:58 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.01"
[Thu Oct 13 20:59:35 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_src13.ximg exists
[Thu Oct 13 20:59:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_src13.csv
[Thu Oct 13 20:59:35 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Oct 13 20:59:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_src13.csv
[Thu Oct 13 20:59:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 13 20:59:36 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Oct 13 20:59:36 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Oct 13 20:59:36 2011] Fit fullrun_mos2_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Oct 13 20:59:54 2011] Source 27 is offset by 5.127711 and -6.771998 pixels which is larger than
2 X fitted extent = 2.228092 x 2.228092, not incorporating fit results
[Thu Oct 13 20:59:55 2011] Vigneting correction estimate = 1.000000
[Thu Oct 13 20:59:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 13 20:59:55 2011] Assessing source extent using major
[Thu Oct 13 20:59:55 2011] Source does appear to be extended
[Thu Oct 13 20:59:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 13 23:31:56 2011] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu Oct 13 23:31:56 2011] Initial guess for spatial extent in simple fitting = 7.01"
[Thu Oct 13 23:31:56 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Thu Oct 13 23:31:56 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 7.01"
[Fri Oct 14 00:47:25 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Oct 14 00:47:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_src13.csv
[Fri Oct 14 00:47:25 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Oct 14 00:47:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_src13.csv
[Fri Oct 14 00:47:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 00:47:26 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 14 00:47:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Oct 14 00:47:26 2011] fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 14 00:47:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Oct 14 00:47:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 00:47:42 2011] Source 27 is offset by 5.841183 and -5.247400 pixels which is larger than
2 X fitted extent = 1.073283 x 1.073283, not incorporating fit results
[Fri Oct 14 00:47:42 2011] Spatial fit model total counts = 268.692000, observed total counts = 794.000000
[Fri Oct 14 00:47:42 2011] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 14 00:47:42 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 65.755613 pixels away
[Fri Oct 14 00:47:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 00:47:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 00:47:42 2011] Assessing source extent using major
[Fri Oct 14 00:47:42 2011] Source does appear to be extended
[Fri Oct 14 00:47:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 03:25:55 2011] XMMSAS src. selection expression = ellipse(26151.984894, 27283.444214, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct 14 03:25:55 2011] Writing source region out to fullrun_mos2_xmm0112280201_pi300-10000_pass1_cl_src27_src.reg
[Fri Oct 14 03:25:55 2011] Extracting stamp from image fullrun_mos2_xmm0112280201_pi300-10000_cl_sm2.00.img.gz, (264, 277) - (339, 352)
[Fri Oct 14 03:25:55 2011] XMMSAS bgd. selection expression = annulus(26151.984894, 27283.444214, 1087.500000, 2175.000000, X, Y) && !ellipse(26731.981480, 28634.023400, 753.745622, 414.728012, 19.889900, X, Y) && !ellipse(25760.707600, 27928.635600, 805.856023, 417.028012, 142.746700, X, Y) && !ellipse(24139.808960, 27503.699600, 394.377611, 394.377611, 0.000000, X, Y) && !ellipse(24919.394600, 27405.010000, 699.896820, 699.896820, 0.000000, X, Y) && !ellipse(25157.633942, 26827.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.406219, 28555.845764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28518.852600, 25826.842000, 371.968239, 371.968239, 0.000000, X, Y) && !ellipse(27472.506195, 29503.115082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27766.014000, 28713.968000, 1271.504037, 1271.504037, 0.000000, X, Y)
[Fri Oct 14 03:25:55 2011] Writing fullrun_mos2_xmm0112280201_pi300-10000_pass1_cl_src27.gif
[Fri Oct 14 03:30:16 2011] Mean detx,y = (135.18, -497.70) 
[Fri Oct 14 03:30:18 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 03:30:37 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 03:30:37 2011] Setting source spectrum file to fullrun_mos2_xmm0112280201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Oct 14 03:30:37 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112280201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Oct 14 03:59:25 2011] Not generating rmf since there are only 49 counts
[Fri Oct 14 03:59:25 2011] rmf not generated due to insufficient counts
[Fri Oct 14 04:00:55 2011] Updating aperture counts using extracted products
[Fri Oct 14 04:00:55 2011] Error reading totcts from fullrun_mos2_xmm0112280201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Oct 14 04:00:57 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 04:00:57 2011] Using photon index=1.80, rate=0.00289, arf fullrun_mos2_xmm0112280201_pi300-10000_pass1_cl_src27.arf
[Fri Oct 14 04:00:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 04:00:57 2011] Updating source flux to 3.1e-14
[Fri Oct 14 04:02:15 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting