[Thu Oct 13 17:44:25 2011] Detection parameters:
  Position = (283.3, 323.9) = 12 30 41.25 41 38 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.9 +/- 8.9
  Background counts = 7.2
  Rate = 0.002 +/- 0.0005

[Thu Oct 13 17:44:25 2011] Off-axis axis estimate = 2.15'
[Thu Oct 13 18:44:18 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Oct 13 18:44:18 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Oct 13 18:44:18 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.010
[Thu Oct 13 18:44:18 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 7.50"
[Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src27.ximg exists
[Thu Oct 13 19:42:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src27.csv
[Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Oct 13 19:42:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src27.csv
[Thu Oct 13 19:42:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Oct 13 19:42:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Oct 13 19:42:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Oct 13 19:42:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 13 20:59:49 2011] Warning, spatial fit 27 centroid is now closest to src. 21
[Thu Oct 13 20:59:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct 13 20:59:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 13 20:59:49 2011] Assessing source extent using major
[Thu Oct 13 20:59:49 2011] Source does appear to be extended
[Thu Oct 13 20:59:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 13 20:59:49 2011] Source is confused with source 3
[Thu Oct 13 20:59:49 2011] Source is confused with source 21
[Thu Oct 13 22:17:09 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Oct 13 22:17:09 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Oct 13 22:17:09 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.010
[Thu Oct 13 22:17:09 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 7.50"
[Thu Oct 13 23:31:56 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_src23.ximg exists
[Thu Oct 13 23:31:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_src23.csv
[Thu Oct 13 23:31:56 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Oct 13 23:31:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_src23.csv
[Thu Oct 13 23:31:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 13 23:31:56 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Oct 13 23:31:56 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Oct 13 23:31:56 2011] Fit fullrun_mos1_xmm0112280201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Oct 14 00:47:37 2011] Source 23 is offset by 9.030527 and -3.776193 pixels which is larger than
2 X fitted extent = 1.402354 x 1.402354, not incorporating fit results
[Fri Oct 14 00:47:37 2011] Source 23 is offset by 5.334435 and 5.842428 pixels which is larger than
2 X fitted extent = 2.130795 x 2.130795, not incorporating fit results
[Fri Oct 14 00:47:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 00:47:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 00:47:37 2011] Assessing source extent using major
[Fri Oct 14 00:47:37 2011] Source does appear to be extended
[Fri Oct 14 00:47:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 02:45:26 2011] XMMSAS src. selection expression = ellipse(24599.615814, 28134.511200, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct 14 02:45:26 2011] Writing source region out to fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src23_src.reg
[Fri Oct 14 02:45:26 2011] Extracting stamp from image fullrun_mos1_xmm0112280201_pi300-10000_cl_sm2.00.img.gz, (246, 286) - (321, 361)
[Fri Oct 14 02:45:26 2011] XMMSAS bgd. selection expression = annulus(24599.615814, 28134.511200, 1087.500000, 2175.000000, X, Y) && !ellipse(26779.866560, 28621.476600, 818.552024, 818.552024, 0.000000, X, Y) && !ellipse(25730.272400, 27920.089200, 602.642417, 602.642417, 0.000000, X, Y) && !ellipse(24134.992320, 27495.439200, 371.800011, 371.800011, 0.000000, X, Y) && !ellipse(24868.370000, 27476.838000, 951.960027, 951.960027, 0.000000, X, Y) && !ellipse(22702.310200, 30705.066200, 453.698413, 453.698413, 0.000000, X, Y) && !ellipse(25128.179047, 26862.513214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.899170, 29416.555817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.513600, 28644.656000, 1251.688036, 1251.688036, 0.000000, X, Y)
[Fri Oct 14 02:45:26 2011] Writing fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src23.gif
[Fri Oct 14 02:54:49 2011] Mean detx,y = (1024.20, -1107.98) 
[Fri Oct 14 02:54:51 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 02:55:05 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 02:55:06 2011] Setting source spectrum file to fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Oct 14 02:55:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Oct 14 03:25:40 2011] Not generating rmf since there are only 31 counts
[Fri Oct 14 03:25:40 2011] rmf not generated due to insufficient counts
[Fri Oct 14 04:00:52 2011] Updating aperture counts using extracted products
[Fri Oct 14 04:00:52 2011] Error reading totcts from fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Oct 14 04:00:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 04:00:54 2011] Using photon index=1.80, rate=0.0019, arf fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src23.arf
[Fri Oct 14 04:00:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 04:00:54 2011] Updating source flux to 1.9e-14
[Fri Oct 14 04:01:00 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting