[Thu Oct 13 17:44:25 2011] Detection parameters:
  Position = (261.5, 354.1) = 12 30 49.71 41 40 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.3 +/- 13.8
  Background counts = 6.1
  Rate = 0.009 +/- 0.001

[Thu Oct 13 17:44:25 2011] Off-axis axis estimate = 4.84'
[Thu Oct 13 18:44:18 2011] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Thu Oct 13 18:44:18 2011] Initial guess for spatial extent in simple fitting = 8.85"
[Thu Oct 13 18:44:18 2011] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.584
[Thu Oct 13 18:44:18 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 8.85"
[Thu Oct 13 19:42:57 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Oct 13 19:42:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src6.csv
[Thu Oct 13 19:42:57 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Oct 13 19:42:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src6.csv
[Thu Oct 13 19:42:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Oct 13 19:42:58 2011] Fit fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Oct 13 20:59:49 2011] Spatial fit model total counts = 138.000000, observed total counts = 138.000000
[Thu Oct 13 20:59:49 2011] Offset between fit and detection position for source 2 = 0.633610 pixels
[Thu Oct 13 20:59:49 2011] 136.961400 total counts/ 59.424800 bgd. counts: snr = 10.058261
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.633610 pixels
  Position = (261.5, 353.5) = 12 30 49.72 41 40 57.3
  Extent = 5.7 (4.4-6.7)", rotation angle = 0
  Source counts = 77.5 +/- 11.7
  Background counts = 59.4
  Rate = 0.004 +/- 0.0007
[Thu Oct 13 20:59:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct 13 20:59:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 13 20:59:49 2011] Assessing source extent using major axis lower bound
[Thu Oct 13 20:59:49 2011] Source does appear to be extended
[Thu Oct 13 20:59:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 13 22:17:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 13 22:17:09 2011] Initial guess for spatial extent in simple fitting = 5.67"
[Thu Oct 13 22:17:09 2011] source mask rpix=1.3, npix_max = 13, mask sum = 3, frac = 0.231
[Thu Oct 13 22:17:09 2011] Skipping simple spatial due to low active detector fraction
[Fri Oct 14 00:47:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 00:47:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 00:47:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 00:47:37 2011] Source does appear to be extended
[Fri Oct 14 00:47:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 02:45:26 2011] XMMSAS src. selection expression = ellipse(22702.310200, 30705.066200, 340.273810, 340.273810, 0.000000, X, Y)
[Fri Oct 14 02:45:26 2011] Writing source region out to fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src2_src.reg
[Fri Oct 14 02:45:26 2011] Extracting stamp from image fullrun_mos1_xmm0112280201_pi300-10000_cl_sm2.00.img.gz, (242, 334) - (281, 373)
[Fri Oct 14 02:45:26 2011] XMMSAS bgd. selection expression = annulus(22702.310200, 30705.066200, 567.123016, 1134.246033, X, Y)
[Fri Oct 14 02:45:26 2011] Writing fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src2.gif
[Fri Oct 14 02:47:14 2011] Mean detx,y = (4332.33, -898.21) 
[Fri Oct 14 02:47:16 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 02:47:24 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 02:47:25 2011] Setting source spectrum file to fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Oct 14 02:47:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Oct 14 03:24:48 2011] Not generating rmf since there are only 77 counts
[Fri Oct 14 03:24:48 2011] rmf not generated due to insufficient counts
[Fri Oct 14 04:00:51 2011] Updating aperture counts using extracted products
[Fri Oct 14 04:00:51 2011] Error reading totcts from fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Oct 14 04:00:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 04:00:52 2011] Using photon index=1.80, rate=0.00449, arf fullrun_mos1_xmm0112280201_pi300-10000_pass1_cl_src2.arf
[Fri Oct 14 04:00:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 04:00:52 2011] Updating source flux to 6.4e-14
[Fri Oct 14 04:01:00 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting