[Thu Oct 13 17:44:25 2011] Detection parameters: Position = (231.9, 424.2) = 12 31 1.26 41 46 6.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 31.9 +/- 7.3 Background counts = 4.8 Rate = 0.004 +/- 0.0008 [Thu Oct 13 17:44:25 2011] Off-axis axis estimate = 10.32' [Thu Oct 13 18:44:18 2011] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting [Thu Oct 13 18:44:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Oct 13 18:44:18 2011] Initial guess for spatial extent in simple fitting = 11.59" [Thu Oct 13 18:44:18 2011] source mask rpix=2.7, npix_max = 40, mask sum = 33, frac = 0.824 [Thu Oct 13 18:44:18 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 11.59" [Thu Oct 13 19:42:57 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src9.ximg exists [Thu Oct 13 19:42:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src9.csv [Thu Oct 13 19:42:57 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src9_1.ximg exists [Thu Oct 13 19:42:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src9.csv [Thu Oct 13 19:42:57 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Thu Oct 13 19:42:58 2011] fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Thu Oct 13 19:42:58 2011] Fit fullrun_mos1_xmm0112280201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Thu Oct 13 20:59:49 2011] Spatial fit model total counts = 74.734400, observed total counts = 74.000000 [Thu Oct 13 20:59:49 2011] Offset between fit and detection position for source 10 = 0.107671 pixels [Thu Oct 13 20:59:49 2011] 73.382900 total counts/ 57.655200 bgd. counts: snr = 2.071314 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.107671 pixels Position = (231.8, 424.3) = 12 31 1.30 41 46 5.1 Extent = 3.5 (2.9-5.1)", rotation angle = 0 Source counts = 15.7 +/- 8.6 Background counts = 57.7 Rate = 0.0009 +/- 0.0005 [Thu Oct 13 20:59:49 2011] Vigneting correction estimate = 1.000000 [Thu Oct 13 20:59:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Oct 13 20:59:49 2011] Assessing source extent using major axis lower bound [Thu Oct 13 20:59:49 2011] Source does appear to be extended [Thu Oct 13 20:59:49 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Oct 13 20:59:49 2011] Deleting source due to low Poisson probability 0.9