[Thu May 31 01:12:20 2012] Detection parameters:
  Position = (316.7, 332.0) = 12 4 6.19 20 14 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.5 +/- 13.9
  Background counts = 25.3
  Rate = 0.008 +/- 0.001

[Thu May 31 01:12:20 2012] Off-axis axis estimate = 2.77'
[Thu May 31 01:30:49 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Thu May 31 01:30:49 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Thu May 31 01:30:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949
[Thu May 31 01:30:49 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.81"
[Thu May 31 01:36:35 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 31 01:36:35 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 31 01:36:35 2012] Fit fullrun_mos2_xmm0112271101_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu May 31 01:36:35 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 31 01:36:35 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 31 01:36:35 2012] Fit fullrun_mos2_xmm0112271101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 31 01:36:40 2012] Spatial fit model total counts = 239.176000, observed total counts = 228.000000
[Thu May 31 01:36:40 2012] Offset between fit and detection position for source 2 = 3.440562 pixels
[Thu May 31 01:36:40 2012] 237.187700 total counts/ 149.895000 bgd. counts: snr = 7.129915
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.440562 pixels
  Position = (317.5, 328.6) = 12 4 5.94 20 13 49.5
  Extent = 14.1 (11.2-15.6)" x 4.1 (2.8-5.7)", rotation angle = 75 (67-84) degrees
  Source counts = 87.3 +/- 15.4
  Background counts = 149.9
  Rate = 0.01 +/- 0.002
[Thu May 31 01:36:40 2012] Vigneting correction estimate = 1.000000
[Thu May 31 01:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 01:36:40 2012] Assessing source extent using major axis lower bound
[Thu May 31 01:36:40 2012] Source does appear to be extended
[Thu May 31 01:36:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.98
[Thu May 31 01:36:40 2012] Source is asymmetric
[Thu May 31 01:36:40 2012] Source is confused with source 4
[Thu May 31 01:56:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 01:56:51 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Thu May 31 01:56:51 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.930
[Thu May 31 01:56:51 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.10"
[Thu May 31 02:02:22 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 31 02:02:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_src5.csv
[Thu May 31 02:02:22 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 31 02:02:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_src5.csv
[Thu May 31 02:02:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 02:02:22 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 31 02:02:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 31 02:02:22 2012] fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 31 02:02:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 31 02:02:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112271101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 02:02:26 2012] Source 2 is offset by 0.708266 and -3.194966 pixels which is larger than
2 X fitted extent = 2.337802 x 2.337802, not incorporating fit results
[Thu May 31 02:02:26 2012] Warning, spatial fit 5 centroid is now closest to src. 11
[Thu May 31 02:02:26 2012] Source 5 in spatial fitting is no longer close to this source
[Thu May 31 02:02:26 2012] Vigneting correction estimate = 1.000000
[Thu May 31 02:02:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 02:02:26 2012] Assessing source extent using major axis lower bound
[Thu May 31 02:02:26 2012] Source does appear to be extended
[Thu May 31 02:02:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.98
[Thu May 31 02:02:26 2012] Source is asymmetric
[Thu May 31 02:20:52 2012] XMMSAS src. selection expression = ellipse(27576.913600, 28541.382000, 848.844024, 243.505807, 75.355400, X, Y)
[Thu May 31 02:20:52 2012] Writing source region out to fullrun_mos2_xmm0112271101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 31 02:20:52 2012] Extracting stamp from image fullrun_mos2_xmm0112271101_pi300-10000_cl_sm2.00.img.gz, (269, 280) - (366, 377)
[Thu May 31 02:20:52 2012] XMMSAS bgd. selection expression = annulus(27576.913600, 28541.382000, 1414.740041, 2829.480081, X, Y) && !ellipse(27601.264380, 28436.300200, 331.843210, 331.843210, 0.000000, X, Y) && !ellipse(28810.133200, 28629.013200, 345.122410, 345.122410, 0.000000, X, Y)
[Thu May 31 02:20:52 2012] Writing fullrun_mos2_xmm0112271101_pi300-10000_pass1_cl_src2.gif
[Thu May 31 02:21:28 2012] Mean detx,y = (-1269.80, 329.30) 
[Thu May 31 02:21:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 02:21:34 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 02:21:34 2012] Setting source spectrum file to fullrun_mos2_xmm0112271101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 02:21:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112271101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 31 02:25:19 2012] Not generating rmf since there are only 87 counts
[Thu May 31 02:25:19 2012] rmf not generated due to insufficient counts
[Thu May 31 02:25:35 2012] Updating aperture counts using extracted products
[Thu May 31 02:25:35 2012] Error reading totcts from fullrun_mos2_xmm0112271101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 02:25:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 02:25:36 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0112271101_pi300-10000_pass1_cl_src2.arf
[Thu May 31 02:25:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 02:25:36 2012] Updating source flux to 1.8e-13
[Thu May 31 02:25:48 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu May 31 02:25:48 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu May 31 02:25:48 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting